WRDD/EEAM/MLD-I/ eNIT-08/2026-27/SL03
Water Resources Development Directorate · English Bazar, West Bengal · Repair, Maintenance & AMC Services · open
Key facts
- Tender value: ₹3.6L
- EMD: ₹7K
- Published: 13 Oct 2026
- Closing date: 03 Nov 2026
- Status: open
- Status as of: 21 Oct 2026 00:38 UTC
- Department: Water Resources Development Directorate
- Office: Malda-I (Agri-Mech) Division
Description
Repairing of a twin hull type steel barge at the Budhia-II government-owned and operated Major RLI Scheme in English Bazar Block, under Malda-I (A-M) Sub-Division and Malda-I (A-M) Division, under Non-Plan Maintenance.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (23)
- Shifting of barge from the existing pin point to a suitable working site or place from RLI site and blocking of the barge by area cleareance,earth cutting winching jacking planking block fitting & unjacking & placing of the RLI site including tools, plants for blocking. — Qty: 1 Each
- Removing the pump sets installed on the barge from the foundation including disconnection & removal of suction & delivery assemblies from the barge to a secured place and re-fitting the same properly after the maintainence of the barge. — Qty: 2 Each
- Opening, strengthening & refitting of plates, angles. purlines, trusses, bolllard, expanded metal/ BRC net winch etc. as required and as per direction of the E.I.C. — Qty: 1 Each
- Acid treatment and removing rust corrosion etc. from the surface both inside and outside of hulls keels deck of the steel barge throughly as direction of the EIC. — Qty: 105.054 Sqm
- Chipping, scraping wire brushing & cleaning of the painted surface for keel, hull, frame, superstructure deck, fender both inside and outside as per direction of the EIC. — Qty: 1 Each
- Patch/ doubling work complete with 5 mm thk M.S. plate including welding, gas cutting, fitting, fixing complete. (a) Cost of 5 mm thk M.S. plate including wastage due to cutting, labour charge for straighting, fitting fixing in position. — Qty: 24.721 Sqm
- (b) Gas cutting to required size of 8 mm thk M.S. plate, N.S>C. channel etc. including labour charges , higher charges of all tools and plants. — Qty: 218.34 mtr.
- (c) Electric welding charge for 5 mm thk M.S. plate, M.S> channels etc. and other member of the barge including hire charges of all tools and plants. — Qty: 145.56 mtr.
- M.S. structuarl work in roof trusses etc with the following rolled structural members viz. angle, flat, bars etc. weighing less then 22 kg./ m connection to one another with brackets, cleats, bolts & nuts etc. as per design and direction complete including febrication hoisting & erection. (a) Suppling, fitting & fixing of M.S. angle for post rafter purloin etc and for joining the two hulls at both ends including gas cutting etc. (i) 45 mm x 45 mm x 6 mm — Qty: 2.8 mtr.
- (b) Suppling, fitting & fixing of M.S. flat bar including gas cutting etc. (i) 40 mm x 6 mm for straightening of B.R.C. net etc. including gas cutting. — Qty: 3.66 mtr.
- Supplying fitting fixing of 75 mm (NB) MS pipe including gas cutting and welding as fender of barge. — Qty: 10 mtr.
- Suppling, fitting and fixing of different size of bolt and nuts with washer for fixing door (10 to 16 mm dia) upto 75 mm length — Qty: 7 Kg.
- Suppling, fitting fixing 10 cm oxidized hinge (100 mm x 58 mm x 1.9 mm) for fixing door including the cost of welding. — Qty: 2 each
- Suppling, fitting fixing iron hasp bolt of approved quality (oxidized) & socket on the doors including the cost of welding. The bolt would be 30 cm. long and dia of bolt not less than 18 mm. — Qty: 1 each
- Suppling, fitting fixing of I.R.C. net (75 mm x 25 mm x 10 swg) with nuts and bolts of the barge including gas cutting etc. — Qty: 8 Sqm
- Suppling, fitting fixing complete with fastener :- Galvanized corrugated iron sheet work (including the supporting frame work) fitted and fixed with 10 mm dia "J" or "L" hook-bolts, limpet and bitumen washers and putty complete with 150 mm end lap and one corrugation minimum side lap with 0.63 mm thk sheet in roof. — Qty: 18.007 Sqm
- G.I. sheet ridging fitted and fixed with necessary bolts and nuts sctews, washers etc. complete with 0.60 mm sheets. — Qty: 4.25 mtr.
- (a) Primming one coat on steel or other metal surface with synthetic enamel /oil bound primer of approved quality including smoothening surface by sand paper etc. — Qty: 192.458 Sqm
- (b) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc, if necessary (i) Two coat (with any shade except white) — Qty: 87.404 Sqm
- Painting with Coal Tar Epoxy Paint Two Coat of approved brand (Minimum Dry Film Thickness (DFT) 200 Micron) at all location prepared and applied as per manufacturess specification on Steel Surface. — Qty: 105.054 Sqm
1 tender document(s) available — sign up to download.
Related tenders
- Outsourcing of Services for Revitalisation and Surface Refinement of Institutional Furniture — Repair, Maintenance & AMC Services · Maharashtra
- HIRING OF SERVICES FOR WATERPROOFING TREATMENT OF SHED ROOF AT INS HAMLA — Repair, Maintenance & AMC Services · Maharashtra
- Hiring of Services for Crack Cleaning, Polymer Modified Mortar Filling and Epoxy Injection Treatment — Repair, Maintenance & AMC Services · Maharashtra
- Supplying and fixing of 22228K with sleeve and Check Nut HE 328 and V Belt D-358 of MMV installed at OC 1and2 Mine of OSA under Orient Area — Repair, Maintenance & AMC Services · Odisha · ₹2.0L
- Offloading the work of Changing of Clutch Release bearing, Clutch Disc, Fly wheel and Radiator etc. assemblies work of light vehicle truck (UP64H-1338) of Dumper Section, NWS of Khadia Project. — Repair, Maintenance & AMC Services · Uttar Pradesh · ₹1.1L
- Annual Maintenance Service - Desktops, Laptops and Peripherals - DESKTOP/LAPTOP/PRINTERS/SCANNERS; CANON/HP/DELL/ACER/EPSON/BROTHER/TVSE — Repair, Maintenance & AMC Services · Rajasthan · ₹6.0L
- Preventive maintenance of discharge chutes of sink screen, changing of by pass chute of jig bypass conveyor belt along with drive unit of belt at Bhojudih Coal Washery — Repair, Maintenance & AMC Services · West Bengal · ₹5.2L
- Strengthening/ preventive maintenance of V.T. Pumps (Main) of slurry ponds and its structure base and connecting pipelines and pump house at Bhojudih Coal Washery. — Repair, Maintenance & AMC Services · West Bengal · ₹4.9L