WORK NO. 02

URBAN IMPROVEMENT TRUST ,SIKAR · SIKAR, Rajasthan · Civil Works & Infrastructure · open

Key facts

Tender value: ₹87.4L
EMD: ₹1.7L
Published: 25 Sep 2026
Closing date: 06 Oct 2026
Status: open

Description

Dismantling of existing structures, survey, earthwork, construction of embankment, roadwork, bituminous work, marking, signage, and construction of foundation/installation structures as specified in the tender document.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (16)

Part 'A' — Qty: 618.75 Cum
Survey of Proposed road including printout of Plan, L-Section & Cross section onA-3size paper in three copies & one softcopy of approved media — Qty: 2.3 Km
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3 — Qty: 3795 Cum
Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300-1 and 300-2 as per MoRTH Specification Clause 305.3 — Qty: 3795 Cum
Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300-1 and 300-2 for subgrade construction as per MoRTH Specification Clause 305.3.4 — Qty: 1650 Cum
Plant Mix Method ,Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with notor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S. 2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete [MoRTH specification : Clause 401]. By Mechanical means.For Grading I Material — Qty: 1742 Cum
Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH Specification Clause 406.By Mechanical Means with all leads. — Qty: 1320 Cum
Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base (Stablised soil baes/Crusher Run Macadam) including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per MoRTH Specification Clause 502. — Qty: 8798 sqm
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503 — Qty: 8798 sqm
Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MoRTH Specification Clause 504. Bitumen (VG-30) — Qty: 440 Cum
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510.Case - II By Mechanical Means.Bitumen (VG-30) — Qty: 8798 Sqm
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511. — Qty: 8798 Sqm
Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160°C with a special applicator machine complete with labour material and traffic diversion arrangements. — Qty: 460 Sqm
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801.600 mm circular — Qty: 8 Each
Providing and fixing Central Road Fund display board size 180-160 cm made out of 1.6 mm thick MS sheet duly framed with angle iron 65x65x5mm size having 2 Nos posts 3 m long from ground level and 0.45m embended in M-15 cement concrete block 300x300x600mm in ground on shoulder of road including painting & lettering as per MoRTH specifications clause 801 with enameled paint complete in all respects. — Qty: 1 Each
Construction of Foundation/Inaugration Pedastal in 23 cm thick Brick masonry in CM 1:4 of size 1.20m x 1.80m above ground level with adequate foundation including providing and fixing of Granite stone of size 0.75m 0.60m with engraving letters and figures, cement plaster, white washing etc. complete as per direction engineer in-charge. — Qty: 1 Each

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
TTPS Operation Circle CAD ACWPH Annual Overhaulinlg DG Set III Attending minor repair works, Dismantling and Cleaning of Heat exchanger, DM water tank and Replacement of Coolant — Civil Works & Infrastructure · Tamil Nadu
Road renovation work on the Fatehpur Minor from km 2.600 to km 5.400 — Civil Works & Infrastructure · Uttar Pradesh
Constuction of Community Compost Pit at Purkhu Panchayat Kot Lower A Khass Block Bhalwal — Civil Works & Infrastructure · Jammu and Kashmir · ₹36K
Facility Management Services - LumpSum Based - Anganwadi Centres — Civil Works & Infrastructure · Jharkhand · ₹25.8Cr
Upgradation of Arjun Mess consisting of following items along with installation — Civil Works & Infrastructure · Telangana
Warehousing Service - Per MT - Monthly Basis - Rehiring of Godown under modified PWS scheme at revenue district — Civil Works & Infrastructure · Jharkhand
Hiring of Third-Party Inspection Agency - Construction / Civil Engineering Works — Civil Works & Infrastructure · Assam