WBSIDCL/26 Elec 26-27 Sl No -2

West Bengal Small Industries Development Corporation Limited (WBSIDCL) · Garia, West Bengal · Civil Works & Infrastructure · open

Key facts

Tender value: ₹2.7L
EMD: ₹5K
Published: 29 Oct 2026
Closing date: 10 Nov 2026
Status: open
Status as of: 31 Oct 2026 03:58 UTC
Department: Engineering Division

Description

Renovation of the Ground Floor Office Room and Waiting Room of the H.M.C. Town Hall Building under H.M.C. The supplied BOQ document conflicts with the portal metadata, which describes renovation of an existing 13-passenger lift at Garia Commercial Park.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Make in India (MII): No
MSE preference: No

Line items (30)

Dismanlting all types of masonry excepting cement concrete plain or reinforced,stacking serviceable materials at site and removing rubbish as directed within a led of 75m. a) in ground floor including roof Ref : P.W.D.(Bldg.), Page-10, Item No.- 1 — Qty: 0.5 M3
Plaster with sand and cement mortar including rounding off corners or chamfering corners as directed and including raking out joints or roughening of concrete surface, curing with cost and carriage of all materials. (ii) With 1:4 cement mortar (b) 15 mm thick plaster [Ref : P.W.D.(Bldg.), Page -189 Item-1 (3rd Corrigenda)] — Qty: 4 sqm
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) [Ref : P.W.D.(Bldg.), Page -198, Item-5] — Qty: 2.5 sqm
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification andas per direction of the EIC. (In Ground Floor) i) Water based interior grade Acrylic Primer (b) Two Coats [Ref : P.W.D.(Bldg.). Page- 196, Item-7.(b).(i)] — Qty: 2.5 sqm
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. iii) Two coats. [Ref : P.W.D.(Bldg.). Page- 196, Item-10] — Qty: 2.5 sqm
Supplying, fitting and fixing PUF Insulated sandwich 60 mm thick & 1.0 m wide wall panels having PUR (density 40 ± 2 kg/cum & self extinguishing) conforming to IS:12436-1988 as core material with pre painted Galvanised sheet conforming to IS:14246-1995 of minimum thickness 0.5mm & minimum yield stress 240 MPa with Zinc coating of minimum 120 gsm as per IS:277-1992 as skin on both faces affixed by self-bonding to generate minimum adhesive strength (foam to steel) 2.9 kg/cm 2 duly protected by 5-7 micron epoxy primer on both faces & polyester top coat of 15- 18 micron and shall be vertically joined together by tongue & groove joints & cam locks spaced @ 1m c/c along the joints to form a continuous wall and fixed by self-tapping GI screws with requisite length & number to the peripheral frame through 'Ú' tracks/ rivets etc complete in all respects as per direction of the Engineer-in-Charge [Ref : P.W.D.(Bldg.). Page- 287, Item-10] — Qty: 33 sqm
Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) [Ref : P.W.D.(Bldg.). Page- 250, Item-27.(b)] — Qty: 16 sqm
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (a) 1st class Best Indian teak. [Ref : P.W.D.(Bldg.), Page-114, Item No.- 1.(b)] — Qty: 0.05 M3
Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) (i) 50 mm thick shutters with 25mm thick panel of size 30 to 45 cm (a) 1st class best Indian teak. [Ref : P.W.D.(Bldg.). Page- 117, Item-1.(i).(a)] — Qty: 3 M2
Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (vi) 19 mm [Ref : P.W.D.(Bldg.). Page- 173, Item - 2.(iv).(vi)] — Qty: 4 M2
Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (vi) 12 mm [Ref : P.W.D.(Bldg.). Page- 173, Item - 2.(iv).(vi)] — Qty: 3 M2
Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidntal charges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm [Ref : P.W.D.(Bldg.). Page- 179, Item-14(i)] — Qty: 13 M2
Copal varnish of approved quality including preparing surface : (ii) On old varnish surface including removing old varnish and exposing original surface : (b) Two coats [Ref : P.W.D.(Bldg.). Page- 202, Item-10.(ii).(b)] — Qty: 26 M2
Polyurethane Polishing to wood work with required colour as approved by Engineer-in-Charge with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete as per direction of Engineer-in- Charge. [Ref : P.W.D.(Bldg.). Page- 203, Item-13] — Qty: 26 M2
Providing and fixing good quality polyester curtain with SS hollow pipe curtain rod including brackets, end caps, rings, hooks, stitching, fitting & fixing and all necessary fittings and accessories complete as directed by the Engineer-in-Charge. [Ref : As per Market Rate] — Qty: 6.5 M2
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) [Ref : P.W.D.(Bldg.). Page- 109, Item-22 (3rd Corrigenda)] — Qty: 6 M
Godrej Hydraulic door closer fitted and fixed complete. (a) Heavy type [Ref : P.W.D.(Bldg.). Page- 143, Item-23.(ii).(a)] — Qty: 1 Each
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted andfixed with cadmium plated screws: (i) 50 x 45 x 2.5mm. [Ref :P.W.D.(Bldg.). Page-145, Item-29(i)&(v)] — Qty: 20 Each
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted andfixed with cadmium plated screws: (v) 100 x 63 x 3.2mm. [Ref :P.W.D.(Bldg.). Page-145, Item-29(i)&(v)] — Qty: 4 Each
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod) (i) 75 mm grip x 10 mm dia rod. [Ref :P.W.D.(Bldg.). Page-145, Item-30(i)] — Qty: 2 Each

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L