WBSDB/EE/CED-III/ NIT-03(e)/2026-27/2
Sundarban Development Board · Sandeshkhali-II, West Bengal · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹73.4L
- EMD: ₹1.5L
- Published: 06 Nov 2026
- Closing date: 23 Nov 2026
- Status: open
- Status as of: 12 Nov 2026 03:58 UTC
- Ministry: Sundarban Affairs Department
- Department: Sundarban Development Board
- Office: Civil Engineering Division No-III
Description
Construction of an RCC jetty with an approach road at Ajijer Ghat over the Rampur River in Bermajur-II Gram Panchayat, Sandeshkhali-II Block, under Nazat Sub Division of Civil Engineering Division No-III, Sundarban Development Board. The work includes jetty and approach-road construction, surveys and soil investigations, and ancillary solar street lighting.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (45)
- Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 for Rural Roads of MORD including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. — Qty: 171 Per M3
- Providing and laying M-35 Design Mix concrete Using concrete Mixer for reinforced concrete work in precast unit for pile, Girder, Slabs, Stair etc.of R.C.C. pile jetty with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including cost of labour , cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. as per drawing and technical specifications (but excluding the cost of necessary form work and staging , reinforcement works. & excluding the cost of handling, transporting to the site of work from casting yard etc — Qty: 33.911 M3
- Supplying, binding, fixing etc. including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper postion of uncoated HYSD reinforcement bar in super-structure completeas per drawing and technical specifications (Reference to MORT&H's specification 1600) . — Qty: 7.793 MT
- Hire and labour charges for shuttering with centreing and necessary staging upto 4 m using approved stout props and thick hard wood planksof approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel Shuttering or 9 to 12mm thick approved quality ply board shuttering. — Qty: 351.32 Sqm
- Providing special type of M.S. collar for fixing screw cutter fitted and fixed to 400 mm. dia. precast R.C.C. pile including supply of 2 nos. locking tube & 25 mm dia locking steel pin. — Qty: 24 each
- Providing special type of M.S. screw cutter including fitting and fixing — Qty: 24 each
- Labour charges for screw driving the R.C.C. pre-cast piles depth of minimum 8.O M upto 9.00 M below bed level as decided by the Engineer-in-charge in tidal riverholds and hoisting the piles using pully fitted to the monorail gentry girder or any other Suitable arrangement for avoiding any damage of the R.C.C. precast piles fixed with special type screw cutter with M.S. collar with fixing steel pin including placing the same on pin points position with the help of pile guide monorail gantry girder or any other arrangement by hoisting capstain manually including cost of hire charge of barge, chain pully, lunch and other machineries, supplying of fuel etc. (Engineer-in-charges reserves the right to reject the pile if the pile is out of plumb beyond the permissible limit or due to breaking cracking and any sort of damages) including mobilization all pants & machineries for erecting & driving the piles as per drawing and design & specification etc. complete. — Qty: 225.08 m
- Labour charges for carrying the precast R.C.C. piles,girder, deck slab, step & other components from casting yard / barge hold by the arrangement of chainpully or any other method fitted & fixed over the barge, without damaging the components including hoisting in proper position and lowering down and placing in position with the help of chain pully or any other method & fitted & fixed properly over the piles in tidal river including hiring charge of barge, launch / best etc. and fitted & fixed in proper position setting etc. complete (Engineer-in-charge reserve the right to reject the components if it breaks, cracks and damage etc.) — Qty: 6 each
- Providing ana laying M-35 Design Mix concrete using concrete mixer for reibnforced concrete work in precast unit for Girder, Slabs, Stairs etc, of RCC Pile jetty with coarse aggretes of appropriate nominal size and grading, fine aggregates (sand) conforming to proper grading zone, both of approved quality and cement as necessary , including cost of labour , cost and carriaqge of all materials and indluding preperation of design mix, approval of the same by the Engineer-In- Charge and cost for quality control, sampling, testing etc. Including the cost of necessary form work and staging complete as per drawing and technical specifications ( but excluding the cost of reinforcement works & excluding the cost of handling, transporting to the site of work from casting yard etc.) — Qty: 23.805 m3
- Supplying, binding, fixing etc. including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper postion of uncoated HYSD reinforcement bar in super-structure completeas per drawing and technical specifications (Reference to MORT&H's specification 1600) . — Qty: 1.892 MT
- Hire and labour charges for shuttering with centreing and necessary staging upto 4 m using approved stout props and thick hard wood planksof approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel Shuttering or 9 to 12mm thick approved quality ply board shuttering. . — Qty: 264.86 Sqm
- Providing heavy duty dense rubber feeder of approved quality fitted & fixed in position as per drawing. — Qty: 48 each
- Construction of Embankment with Material obtained from Borrow pits: Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 & 300-1 .The size course material in the mix of earth ordinarily shall not be exceed 75mm.(Reference to MoRT&H's specification clause 305). Note: Compensation for earth will vary from place to place and will have to be assessed realistically as per particular ground situation. In case earth is available from Govt. land, compensation for earth i.e. ₹ 43.00/m3 to be deducted from the Rate in Col. 4. The position is required to be clearly stated in the cost estimate. — Qty: 112 m3
- Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material (Reference to MORT&H's specification 304). ( Vide P-179,Item 1(I)A(i) of N.H.Sch of 2019-20) — Qty: 46 m3
- Sand Filling in Foundation Trenches with good local sand free from earth not exceeding 150 mm compacted thickness including inundating each layer by profuse water and porking and rammimg layer by layer. Quality of sand is to be approved by the Engineer-in-charge.(Reference to MORT&H's specification 304) — Qty: 8 m3
- Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. (a) Single brick flat soling (thickness 75 mm.) including Riverine. — Qty: 66 m2
- Extra over item No.16 as the work is within the riverine area of Sundarban Surrounded by the Bay of Bengal or the rivers like Hooghly, Muriganga, Saptamukhi, Thakuran, Matla, Raimangal, kalindi etc.@ 5% for Bermajur G.P…… — Qty: 66 m2
- Providing and laying nominal mix Cement concrete (with mix proportion 1:1.5:3) / M-20 grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm of Pakur or other approved variety including Screening and cleaning of aggregates, if necessary, both of approved quality and cement, as necessary, compacting by vibrator or other suitable means, cost of curing with water, cost for quality control, sampling, testing etc. and including placing a Separation membrane of impermeable PVC sheet 125 micron thick transparent or white in colour laid flat with minimum creases. Before placing the separation membrane, the sub-base shall be swept clean of all the extraneous materials. Wherever overlap of plastic sheets is necessary, the same shall be at least 300 mm and any damaged sheathing shall be replaced at the Contractor's cost. Including carriage of all materials to site but excluding the cost of staging, shuttering and and reinforcement if any. incl — Qty: 8.29 m3
- Extra over item No.17 as the work is within the riverine area of Sundarban Surrounded by the Bay of Bengal or the rivers like Hooghly, Muriganga, Saptamukhi, Thakuran, Matla, Raimangal, kalindi etc.@ 5% for Bermajur G.P…… — Qty: 8.29 m3
- Brick masonry work with 1st class full size bricks except when necessary to complete the bond in cement morter 1:3 in sub-structure complete, including thoroughly soaking the bricks in a tank filled with water for aminimum period of one hour prior to being laid, protecting the green structure from rain by suitable covering and with a minimum Seven days curing etc., but excluding pointing and plastering, asper drawing and Technical Specifications. (Reference to MORT&H's specifications 1300 & 2200).. — Qty: 30 m3
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Improvement such as widening and strengthening of Lalitgiri Museum to Kalianti Bridge via Haribhaktapur-Jerakanda road from 0/000 km to 7/575 km in the district of Kataka under State Plan — Civil Works & Infrastructure · Odisha · ₹20.6Cr
- Renovation of Dharamshala in New Yadvindra Colony, ward no. 20 at Patiala. — Civil Works & Infrastructure · Punjab · ₹42.2L
- Lining/Relining of water course of Outlet R.D 6000-R of mr. no 4 of Newada Disty Village Talwandi Malik, Khattriwala Distt. Patiala — Civil Works & Infrastructure · Punjab · ₹60.0L
- Outsourcing of Labour Part for Erection, Testing Commissioning of New 11KVLT/HTLines on Rail/PCC Poles, Distribution T/Fs, Augmentation/Sagging of ACSR of HT/LT Lines, Cables laying, Guarding, Stay Setfor Various Works — Civil Works & Infrastructure · Punjab · ₹60.0L
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Remodelling and renovation Pond Rara Sahib Chowk Somal kheri Np Maloudh — Civil Works & Infrastructure · Punjab · ₹22.3L