WBMAD/ULB/HM/GEN- 3(2026-27)(2nd Call)
Halisahar Municipality · Halisahar, West Bengal · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹33.0L
- EMD: ₹66K
- Published: 12 Oct 2026
- Closing date: 27 Oct 2026
- Status: open
- Status as of: 19 Oct 2026 00:13 UTC
- Department: Municipal Affairs Department
- Office: Halisahar Municipality
Description
Repairing and restoration of bituminous roads from Sarkar Bazar to Subhas Meat Shop and Nabanagar More to Saheb Pukur at Ward No. 14 under Halisahar Municipality.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (7)
- Scarifying Existing Granular Surface to a Depth of 50 mm by Manual Means Scarifying the existing granular road surface to a depth of 50 mm and disposal of scarified material within all lifts and leads upto 1000 metres (P.No.86, ITEM NO:- 14) — Qty: 450 Sq.M
- Water Bound Macadam Providing, laying, spreading andcompacting stone aggregates ofspecific sizes to water boundmacadam specification includingspreading in uniform thickness,handpacking, rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stagesto proper grade and camber, applyingand brooming requisite type ofscreening/ binding Materials to fill upthe interstices of coarse aggregate,watering and compacting to therequired density (Reference toMoRT&H's specification 404). Using Screening (Table 400-10) Type-A (13.2 mm aggregate) Using Screening (Table 400-10) By Manual Means Using Screening (Table 400-10) Type-A (13.2 mm aggregate) (P.No.103, ITEM NO:-9(9A(i)(b) (ANALYSIS RATE) — Qty: 40.5 Cu.M
- Prime Coat. Providing and applying primer coat with cationic bitumen emulsion SS1grade conforming to IS:8887 on prepared porous granular surfaceincluding clearing of road surface and spraying primer usingmechanical means (Reference to MORT&H's specification clause502). On WMM/WBM surface @ 0.70-1.0kg/sqm. (P.No.111, ITEM NO:-1-2(A) (i) (ANALYSIS RATE) — Qty: 450 Sq.M
- Tack Coat Providing and applying tack coatwith Cationic bitumen emulsion(RS1) complying with IS:8887 usingemulsion pressure distributor on theprepared bituminous/ granular/ cement concrete pavementsurface cleaned with mechanicalbroom and high pressure air jet(Reference to MORT&H'sspecification clause 503). i)On bituminous surface @ 0.20kg- 0.3kg /sqm. (P.No.111, ITEM NO:-1-2(A) (i) (ANALYSIS RATE) — Qty: 2520 Sq.M
- Bituminous Macadam Providing and laying bituminous macadam with 100-120 TPH hotmix plant using crushed aggregates of specified grading premixed withapproved bituminous binder @ 3.3%(min) for Grading -1 and 3.4% (min)for Grading -2 by weight of totalmix , transported to site, laid overa previously prepared base withpaver finisher to the required grade, level and alignment androlled as per clauses 501.6 and 501.7 to achieve the desiredcompaction (Reference to MORT&H's specification clause504). for Grading II (19 mm nominalmaximum aggregate size) Layer Thickness 50-75mm (P.No.112, ITEM NO:-1-3 (ii) (ANALYSIS RATE) — Qty: 126 Cu.M
- Providing, laying and rolling ofopen - graded premix surfacing of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates eitherusing viscosity grade bitumen of approved grade to required line,grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with asmooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510). Case - I: Mechanical method using approved grade Bitumen and HMPof appropriate capacity not less than 75 tonnes/hour . (P.No.119, ITEM NO:-1-10 (i) (ANALYSIS RATE) — Qty: 2520 Sq.M
- Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type Aand B seal coats (Reference to MORT&H's specification clause 511) Case - IV : Type B Providing and laying of premix sand seal coat with bitumen emulsion of suitable approved grade. (P.No.121, ITEM NO:-12 (iv) (ANALYSIS RATE) — Qty: 2520 Cu.M
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- imp. Sarvice lane With Nali from Juhi lal colony in Block No 315/4 Block No 317 in ward 84 Zone 3 — Civil Works & Infrastructure · ₹8.3L
- GENERAL REPAIR WORK AT JOINT DIRECTOR SECONDARY EDUCATION OFFICE UDAIPUR — Civil Works & Infrastructure · Rajasthan · ₹15.0L
- 4 NARSAR KARAHIYA SAMPARK MARG SE JUNIOR HIGH SCHOOL TAK PITCH MARG KA LEPAN ANURAKSHAN (SAMANYA MARAMMAT) KARYA.(HOT MIX) — Civil Works & Infrastructure · Uttar Pradesh · ₹15.3L
- Laying RMC M40 in various streets of transport nagar ward no. 30 — Civil Works & Infrastructure · Punjab · ₹1.8Cr
- Estimate For Laying 315mm Dia UPVC U/G Pipe Line For Outlet RD 13350/R of Shahpurkandi Channel No.3 For Year 2026-27 — Civil Works & Infrastructure · Punjab · ₹51.7L
- In Ward-30 Govind Vihar II, work of drain and interlocking tiles from Harendra house to Omendra house and Pravesh house, Sundar house — Civil Works & Infrastructure · ₹19.1L
- purani nagar panchayat ke sthan par shoping complex cum office dukan no 05 — Civil Works & Infrastructure · Madhya Pradesh · ₹8.0L