WB-HMC/NIT/ED-013/L/2026-27/01

Howrah Municipal Corporation · Howrah, West Bengal · Electrical Equipment & Supplies · open

Key facts

Tender value: ₹23.5L
EMD: ₹47K
Published: 29 Oct 2026
Closing date: 16 Nov 2026
Status: open
Status as of: 31 Oct 2026 03:59 UTC
Department: Municipal Affairs Department
Office: Howrah Municipal Corporation

Description

Supply and installation of LED flood and street lights at 23 different ghats of North Howrah under Howrah Municipal Corporation. The work includes poles, wiring, cables, fittings, earthing, LED fixtures, installation, testing and commissioning.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (14)

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required. Ref: DELHI SCHEDULE OF RATES (E&M)-2025/P-72/I-12.4 — Qty: 36 Nos
Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. Ref: PWD/Elec.works/2017/P-C-3/I-20(a) — Qty: 109 Nos
Distribution wiring for street light on pole for outdoor fluorescent / SV / MV light fitting with 2 x 1 / 1.40 PVC insulated and sheathed wire (single core) in 15 mm dia GI pipe (ISI-Medium) without control switch, incl. fitting and fixing the light fitting by providing 32 mm dia GI pipe bracket of length 1.05 mts., on pole incl. S&F suitable MS flat clamps with bolts, nuts etc. as required and painting. Ref: PWD/Elec.works/2017/P-H-5/I-H(2) — Qty: 47 Nos
Supplying & fixing GI waterproof type looping cable box size 200 x 150 x 100mm deep having 4mm thick comprising of one 250Volts 15 A Kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2 core 16 sqmm PVC/A cable and having lined with rubber gasketted CI top cover with brass machine screws etc. earthing terminal with lug,on steel tubular pole near base, incl. S & F 40 x 6 mm thick, MS clamps with bolts, nuts etc.incl.painting with anticorrosive paint. Ref: PWD/Elec.works/2017/P-H-5/I-H(5) — Qty: 156 Nos
Painting of steel tubular pole of length and no.of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl.prepartion of surface by sand paper/emery paper,cleaning etc.for receiving fresh coat of paint upto 9 Mts. long pole:- 2 coats of Aluminium Paint over 1(one) coat of R.O.priming. Ref: PWD/Elec.works/2017/P-H-2/I-4 — Qty: 36 Nos
Painting Block Letters or Digits within a circle/square as required, with "Black Japan" paint of approved make & brand, the size of letters and digits as given below: Size 50 mm and upto75 mm. Ref: PWD/Elec.works/2017/P-H-2/I-6(b) — Qty: 108 Nos
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (hot Dip) wire (4 Mts.long), 13 mm dia x 80 mm long GI bolts, double nuts,double washers incl. S&F 15 mm dia GI pipe protection (1 Mt.long)to be filled with bitumen partly under the ground level and partly above groung level driven to an average depth of 3.65 Mts.below the ground level. By ISI-Medium G.I Pipe. Ref: PWD/Elec.works/2017/P-G-1/I-2(a) — Qty: 36 Nos
Supply of Al.Conductor PVC insulated and sheathed unarmoured cable (1.1 KV grade, Gloster/Havells/Polycab). 4 Core x 10 mm.2. Ref: UDMA/Elec.-Mech.works/2018/P-13/I-3© — Qty: 2284 Mtr
Supplying & Erection of 75 x 88 mm Porcelain Shackle insulator complete with 190 x 30 x 5 mm Galv.(Hot Dip) Strips with 15.88mm dia Galv. bolts, nuts, etc. for conductor upto 7/3.10 mm, 32 sqmm of AAC/equivalent size of ACSR. Ref: PWD/Elec.works/2017/P-H-3/I-D(1) — Qty: 218 Nos
Supply and drawing of 7/14 SWG galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing & Drawing of unarmoured cable of suitable size (supply of cable is not included in the scope)on existing Galvanized stranded wire for centenary system with reel insulators and binding wires. Ref: UDMA/Elec.-Mech.works/2018/P-8/I-41&42 — Qty: 2284 Mtr
Supplying of Swaged Steel Tubular pole(IS 2713,Pt. II 1980) for following designation and of following dimensions 410-SP-1; 7.0 mtrs: 62.00Kg Ref: UDMA/Elec.-Mech.works/2018/P-3/I-1(d) — Qty: 36 Nos
Hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment: Ref: UDMA/Elec.-Mech.works/2018/P-35/I-7 — Qty: 156 Nos
LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt) Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC,frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRIEMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not m — Qty: 109 Nos
LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Sta — Qty: 47 Nos

1 tender document(s) available — sign up to download.

Related tenders

SUPPLY OF V.F TRANSFORMER OF RATIO 470:600 OHMS (CYLINDER TYPE) — Electrical Equipment & Supplies · Madhya Pradesh
Handheld Rechargeable Pocket Torch — Electrical Equipment & Supplies · Madhya Pradesh
Procurement of Digital Dial Indicator and Stainless Steel Flexible Magnetic Base stand — Electrical Equipment & Supplies
Erection of lighting line for mine lighting purpose at R-VI seam and various places coal depot, DDU, Agent office at Khottadih OCP — Electrical Equipment & Supplies · West Bengal · ₹9.9L
Procurement of Electrical instruments/Equipments and machinery for Electrical, Repairing, Fabrication and other electrical works at Gumgaon Mine — Electrical Equipment & Supplies · Maharashtra · ₹1.9L
Work of re-organisation of generator line in different rooms of Bankola Area offiece. — Electrical Equipment & Supplies · West Bengal · ₹1.5L
Diversion of 6.6KV O/H Line at Jharna Face due to increase in water level and widening of Haul Road for feeding power to 4000GPM Motor Pump in SOCP Muraidih AMP Colliery. — Electrical Equipment & Supplies · Jharkhand · ₹1.2L
Installation of earth pits at different substations of Jambad Colliery — Electrical Equipment & Supplies · West Bengal · ₹5.1L