WB-09/TN/ED/EOB/2026-2027

Howrah Municipal Corporation · Howrah, West Bengal · Civil Works & Infrastructure · open

Key facts

Tender value: ₹8.2L
EMD: ₹16K
Published: 10 Oct 2026
Closing date: 24 Oct 2026
Status: open
Status as of: 19 Oct 2026 00:11 UTC
Department: Municipal Affairs Department
Office: Howrah Municipal Corporation

Description

Renovation of Poura Sakha and other allied work of HMC office premises.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (19)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) CPWD(2023) Vol-Il P-239 It-15.2.2 — Qty: 10 Cum
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m CPWD (2023)Vol-I P-97 It-2.8.1 — Qty: 14 Cum
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. CPWD (2023) Vol-I P-83 It-1.1.8 — Qty: 10 CUM
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift . CPWD (2023)Vol-I P-130 It-2.25 — Qty: 8.4 Cum
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. CPWD (2023)Vol-I P-132 It-2.27 — Qty: 1.4 Cum
Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 CPWD(2023) Vol-II P-248 It-16.12.1 — Qty: 1.26 Sqm
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) CPWD(2023) Vol-I P-327 It-6.4.1 — Qty: 2.5 Cum
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources CPWD(2023) Vol-I P-156 It-4.1.3 — Qty: 3 Cum
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). CPWD(2023) Vol-I P-168 It-4.2.2 — Qty: 2.5 Cum
Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns. CPWD (2023)Vol-I P-176 It-4.3.1 — Qty: 4.4 sqm
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. CPWD(2023) Vol-I P-279 It-5.22A.6 — Qty: 137.4 kg
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works CPWD(2023) Vol-I P-769 It-10.25.2 — Qty: 217.6 kg
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work CPWD(2023) Vol-II P-221 It-13.61.1 — Qty: 25.6 Sqm
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washer CPWD(2023) Vol-I P-762 It-10.16.1 — Qty: 1124.7 kg
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm CPWD(2023) Vol-I P-194 It-11.41.3 — Qty: 15.5 sqm
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. CPWD(2023) Vol-I P-143 It-8.31 — Qty: 119.7 sqm
Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge.Anodised aluminium sheet 2.5 mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) CPWD(2023) Voll-I P-326 It-21.7.1 — Qty: 106.1 kg
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work CPWD(2023) Voll-I P-221 It-13.52.1 — Qty: 31.5 Sqm
Turfing lawns with fine grassing including ploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying doobs grass roots at 10 cm apart, including supplying and spreading of farm yard manure at rate of0.6 cum per 100 sqm (Reference to MORT&H's specification 307).PWD NH Wing P-174 It-5 — Qty: 280 Sqm

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
imp. Sarvice lane With Nali from Juhi lal colony in Block No 315/4 Block No 317 in ward 84 Zone 3 — Civil Works & Infrastructure · ₹8.3L
GENERAL REPAIR WORK AT JOINT DIRECTOR SECONDARY EDUCATION OFFICE UDAIPUR — Civil Works & Infrastructure · Rajasthan · ₹15.0L
4 NARSAR KARAHIYA SAMPARK MARG SE JUNIOR HIGH SCHOOL TAK PITCH MARG KA LEPAN ANURAKSHAN (SAMANYA MARAMMAT) KARYA.(HOT MIX) — Civil Works & Infrastructure · Uttar Pradesh · ₹15.3L
Laying RMC M40 in various streets of transport nagar ward no. 30 — Civil Works & Infrastructure · Punjab · ₹1.8Cr
Estimate For Laying 315mm Dia UPVC U/G Pipe Line For Outlet RD 13350/R of Shahpurkandi Channel No.3 For Year 2026-27 — Civil Works & Infrastructure · Punjab · ₹51.7L
In Ward-30 Govind Vihar II, work of drain and interlocking tiles from Harendra house to Omendra house and Pravesh house, Sundar house — Civil Works & Infrastructure · ₹19.1L
purani nagar panchayat ke sthan par shoping complex cum office dukan no 05 — Civil Works & Infrastructure · Madhya Pradesh · ₹8.0L