Up-gradation Modification with Repairs to TK make G plus 1 20 Passenger Bed Lift installed near Ward 03 in IPD Block of Govt. SMHS Hospital Srinagar along with CMC DLP for 01 Year
Public Works Department · Srinagar, Jammu and Kashmir · Repair, Maintenance & AMC Services · open
Key facts
- Tender value: ₹4.9L
- EMD: ₹10K
- Published: 06 Nov 2026
- Closing date: 16 Nov 2026
- Status: open
- Status as of: 16 Nov 2026 01:02 UTC
- Department: Chief Engineer Mechanical and Hospital Directorate Kashmir
- Office: Machinery Division Kashmir
Description
Upgradation and modification of the existing TK make G+1, 20-passenger bed lift at SMHS Hospital, Srinagar, including replacement of the control panel, automatic rescue device, overload weighing device, car door header and door, a 12-month defect liability period, and a one-year comprehensive maintenance contract after the DLP.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (5)
- Replacement of Control panel by way of Design, supply, installation, testing and commissioning of microprocessor-based "smart" control panel with close-loop VVVF drive for existing TK make hospital lift capacity 1360 kg/20 passenger, rated speed 0.5 to 1.0 m/s), G+1 stop), as per following: Cubicle: wall-mounted, dust and vermin proof, compartmentalized panel fabricated from minimum 2 mm CRCA sheet with cable alley having concealed hinged doors and key-type locks. Surface treatment: phosphated & powder coated with approved shade, minimum 70 microns film thickness on all sides. VVVF drive: suitable HP/ kW close-loop type with encoder feedback, overload protection & in-built brake control. Protections and functions: overload sensor, single-phasing preventer, car and landing interlocking, auto/inspection mode, fireman service, door open/close and nudging commands, floor read switches/sensors inputs, car and landing call circuits, auto-attendant, emergency/interlock buzzers, landing gongs, — Qty: 1 job
- Supplying, installation, testing and commissioning of Automatic Rescue Device (ARD) suitable for above TK make lift, comprising microprocessor-based ARD unit/inverter with charger and 4 Nos. 12 V, 18 Ah SMF batteries, providing automatic evacuation of lift car to nearest floor and opening of doors in event of mains power failure, including:Interface with VVVF drive/control panel, control wiring and parameter setting.Simulation tests under power-failure condition to demonstrate proper ARD functioning.Work complete in all respects as per OEM recommendations and to the satisfaction of Engineer-in-Charge — Qty: 1 job
- Supplying, installation, testing and commissioning of electronic overload weighing device for existing TK make hospital lift, consisting of load sensor(s)/load weighing unit, evaluation module, overload indication and audible buzzer, complete with interface to the lift control panel so that the car does not start on overload and gives visual / audible indication when the rated load is exceeded. The work includes mounting of sensors, laying of necessary control wiring, calibration of the device using test loads and demonstration of proper operation to the satisfaction of Engineer-in-Charge. Work complete in all respects as per OEM recommendations — Qty: 1 job
- Supply, Installation, Testing & Commissioning of Car Door Header (1200mm telescopic) along with door. The job includes all accessories, fittings etc to complete the job. The job includes dismounting of the old and damaged car door header along with the door and other old / non-serviceable items, reconnection of all field cables, and shifting the released panel to hospital stores against proper receipt as per instructions of Site Engineer. Work complete in all respects as per OEM standards with test certificates. — Qty: 1 job
- Comprehensive Maintenance Contract (CMC) for one year after expiry of DLP for the above modified TK make hospital lift, including all preventive maintenance, visits, breakdown attendance, lubrication, adjustments and replacement of all worn-out mechanical and electrical parts including major components (motor, VVVF drive, ARD unit, controllers, ropes, door equipment, switches, sensors, PCBs etc.), except damage due to fire, theft, flood, civil works or misuse, as per guidelines and departmental terms & conditions, complete. — Qty: 1 job
1 tender document(s) available — sign up to download.
Related tenders
- KANDRI/ENGG/PUR/2026-27/ 1909 — Repair, Maintenance & AMC Services · Maharashtra · ₹1.4L
- AMC of Cooling Equipments of NPM — Repair, Maintenance & AMC Services · Odisha · ₹6.5L
- Repair and Maintenance Jobs in Unloading and Screening Area of RMHP — Repair, Maintenance & AMC Services · Odisha · ₹53.2L
- Service Engineering Visit for Maintenance of Van Mounted Cable Fault Locator — Repair, Maintenance & AMC Services · Odisha · ₹2.7L
- Emergency Visit for ABB Drives and Automation System — Repair, Maintenance & AMC Services · Odisha · ₹58.4L
- Cylinder Maintenance and Handling Service — Repair, Maintenance & AMC Services · Gujarat · ₹3.1Cr
- THREE YEAR ARC FOR SUPERVISION OF OVERHAULING/SERVICING OF M/S INSTRUMENTATION LIMITED (IL) VALVES AT BPCL KOCHI REFINERY — Repair, Maintenance & AMC Services · Kerala
- THREE YEAR ARC FOR SUPERVISION OF OVERHAULING/SERVICING OF M/S SAMSON VALVES & POSITIONERS, BPCL KOCHI REFINERY — Repair, Maintenance & AMC Services · Kerala