Tender for Supply Installation of Floodlights for Two LAWN Tennis courts and Floodlights for Two Volleyball courts Permanent Campus IIT Dharwad
Indian Institute of Technology Dharwad · Dharwad, Karnataka · Electrical Equipment & Supplies · open
Key facts
- EMD: ₹67K
- Published: 12 Oct 2026
- Closing date: 02 Nov 2026
- Status: open
- Status as of: 22 Oct 2026 02:48 UTC
- Office: IIT Dharwad
Description
Supply, installation, testing and commissioning of sports floodlights for two lawn tennis courts and two volleyball courts at the permanent campus of IIT Dharwad, including poles, foundations, cables, conduits, earthing, mounting arrangements and associated electrical works.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Two Packet Bid
- Evaluation: Item Wise
- Make in India (MII): No
- MSE preference: No
Line items (44)
- 2 — Qty: 4 5
- Supplying, installing, testing and commissioning of Sports Flood Light (ITF Standard) powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz ,Operating temp range -5 0C to 50 0C, internal surge protection of 4 kV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-08 CRI >70, under voltage and over voltage protection, lenses for beam angle 35 deg (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 5700 K Minimum 5 year OEM warranty. System lumen efficacy >105 to <120 lm/Watt output, Luminous flux minimum 23,500lm. 195 to 200 Watt (Philips BVP483) — Qty: 32 Each
- Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom .... mm, top.... mm with 3 mm thick, suitable base plate and 4Nos of ...... long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 12 m - Top 90 mm and Bottom 240 mm dia — Qty: 8 Each
- Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 Meter and upto 12.00 Meter — Qty: 8 Each
- Providing and fixing 40 mm dia. G.I. pipe (medium class) 3.25 thickness for flood light mounting arrangements including connection with G.I. nut, bolt, spring, washer etc. as required. — Qty: 25.6 meter
- Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage up to 1100 Volts as per IS-694:1990 3C x 1.5 mm2 — Qty: 120 meter
- 1.1kV LTUG XLPE Insulated Cables as per IS-7098 (Part-1) with following parameters & as per BESCOM Requirements: • H2/H4 grade Aluminum Conductor having purity of 99.7% • Conductor Resistivity of 0.028264 Ωmm²/m • Insulated through extrusion with high-quality XLPE Compound • For XLPE Insulation as per IS-14255- 1995: . Tensile Strength: 12.5 N/Sqmm (Min). Elongation at Break: 200% (Min) Hot Set Value: Elongation under Load: 75% (Max). Permanent Elongation: 10% (After Cooling) • Extruded inner sheath PVC ST-2 compound • GI strip armoured (hot dip galvanized armour width and thickness in average tolerance of ± 5%, resistivity 14.5 Ω/ Km maximum as per IS-3975 and armour coverage should be minimum 90%) • Outer sheath extruded ST2 PVC compound should pass thermal stability minimum value of 80 minutes conforming to IS-7098 (PART 1) – 2011 10 Sqmm, 4 Core — Qty: 238 meter
- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required but excluding sand cushioning and protective covering. Upto 35 sq. mm — Qty: 238 meter
- Supply and drawing of DWC 32mm, HDPE double-wall corrugated and conforms to IS-14930/IS-16205 standards. — Qty: 238 meter
- Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm (25mm) — Qty: 2 Each
- Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. — Qty: 1 Set
- Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) — Qty: 10 meter
- Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral — Qty: 3 Each
- Fabricating supplying and mounting MS box made out .... SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16 SWG — Qty: 9800 cm2
- Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. — Qty: 3 Each
- Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat framework in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips — Qty: 0.3 meter
- Supply and fixing of 4 poles, Screw terminal / captive deep-insert screws for secure wire fastening, Bakelite, high-impact nylon 66, or flame-retardant polyethene, -40°C to +85°C (standard industrial plastic) or higher for high-temp Bakelite variants, IP67 for sealed circular variants or IP44/open panel-mount block formats. — Qty: 8 Each
- Supplying and fixing of spiral earth electrode, including connection to the poles. — Qty: 8 Nos
- Supplying and fixing angle iron framework fabricated out of M.S. angle iron. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm — Qty: 4.1 meter
- Mounting arrangement for the panels, including excavation, refilling, and concreteing Cement concrete 1:3:6(1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) 0.3X0.3X0.3 - 2 Nos. — Qty: 2 Each
1 tender document(s) available — sign up to download.
Related tenders
- SUPPLY OF V.F TRANSFORMER OF RATIO 470:600 OHMS (CYLINDER TYPE) — Electrical Equipment & Supplies · Madhya Pradesh
- Handheld Rechargeable Pocket Torch — Electrical Equipment & Supplies · Madhya Pradesh
- Procurement of Digital Dial Indicator and Stainless Steel Flexible Magnetic Base stand — Electrical Equipment & Supplies
- Contact Lever Complete of Tap Changer to M/s. REPL's Pt. No. - S-2506 or to RDSO's Drg. No. - SKEL-4659 (Alt. - 1) — Electrical Equipment & Supplies · West Bengal
- Supply, Installation, Testing and Commissioning of standalone IP-CCTV cameras system at Digital Library, Main Building, TMH — Electrical Equipment & Supplies · Maharashtra · ₹6.1L
- PROCUREMENT, SUPPLY, INSTALLATION, TESTING AND COMMISIONING OF LED TRACK 24 MTR — Electrical Equipment & Supplies · Maharashtra
- Supply and Installation of Illuminated Name Board with LED Back Light Letters — Electrical Equipment & Supplies · Maharashtra
- HIRING OF SERVICES FOR INTERNAL CIRCUIT WIRING, SWITCH BOARD FITING AND ENERGY EFFICIENT LED POINT C — Electrical Equipment & Supplies · Maharashtra