STMC scheme work on NH-56 Km 80/000 to 152/800 153/100 to 156/650 157/180 to 172/340 172/850 to 176/540 Pratapgarh-Padi section and 2 lane road in forest area from Km 38/100 to 43/040 46/500 to 47/080 51/640 to 54/500 of NH-56 (Old NH-113)
NH Division-Banswara - MoRTH · Banswara, Rajasthan · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹6.6Cr
- EMD: ₹13.1L
- Published: 13 Nov 2026
- Closing date: 26 Nov 2026
- Status: open
- Status as of: 15 Nov 2026 22:43 UTC
- Ministry: Ministry of Road Transport and Highways
- Department: P4 Delhi - MoRTH
- Office: Office of the Executive Engineer, PWD NH Division, Banswara
Description
Short Term Maintenance Contract for highway maintenance on the specified NH-56 (Old NH-113) sections, including the Pratapgarh-Padi section and forest-area road sections. Estimated cost is Rs. 6.56 crore excluding GST, with a 12-month contract duration.
Eligibility & requirements
- Past performance: 90%
- Startup relaxation: No
- MSE relaxation: No
- Certifications: Chartered Accountant certificate for turnover
- Documents required: Documents defining constitution or legal status, place of registration, and principal place of business, Power of Attorney of the bid signatory, Monetary value of civil engineering construction and maintenance works performed for each of the last three years, Experience certificates for similar works during the last five years, verified by the concerned officer of the rank of Executive Engineer or equivalent or higher, Evidence of availability of required construction and maintenance equipment, Details of proposed technical personnel and their availability affidavits, Reports on financial standing and Chartered Accountant certificate proving turnover for the last three years, Information regarding litigation or arbitration during the last five years, Undertaking that the bidder is not affiliated with the firm or entity hired to prepare bid documents or supervise the contract, Notarized affidavit on stamp paper confirming information furnished with the bid is correct, Other certificates defined in Section 3
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Single Percentage Rate
- Evaluation: Percentage rate
- Make in India (MII): No
- MSE preference: No
Line items (31)
- 2 — Qty: 3 4
- Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material up to a lead of 1000m including removal and disposal of top organic soil not exceeding in 150 mm thickness as per MoRTH specification clause 201. by mechanical means in light jungle — Qty: 24.186 Hect.
- Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material up to a lead of 1000m including removal and disposal of top organic soil not exceeding in 150 mm thickness as per MoRTH specification clause 201.by manual means in light jungle — Qty: 10.366 Hect.
- Construction of sub grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to require slope and compacted by vibratory roller 8-10 Tonne to meet requirement of Table 300-2 as per MoRTH specification Clause No. 305. — Qty: 5028 CUM
- Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil with all leads & lifts and compacting it with plate compactor complete as per MoRTH specification Clause 3003. — Qty: 3690 Cum
- Dismantling of flexible pavements and disposal ofdismantled materials upto a lead of 1000 meters,stacking serviceable and unserviceable materials separately as per MoRTH specification clause 202 By Mechanical Means : Bituminous courses — Qty: 1749.3 cum
- Providing, laying, spreading and compacting stone aggregate for Wet Mix Macadam(as per table 400-12 and 400-13) specification including premixing the material with water to OMC in wet mix plant as per approved design mix,carriage of mixedmaterial by Tipper to site, laying inuniform layers with motor grader/Front end Loader/paverfinisher, in sub base/base course on a well prepared underbase and compacting with vibratory roller to achieve the desired density including lighting,guarding,barricading and maintenance of diversion etc. (MoRTH specification :Clause 406 & Clause 112) by mechanical means with all lead . — Qty: 567.61 cum
- Providing and applying primer coat over prepared surface or granular base with bitumen emulsion SS-1 as per IS: 8887 & manufacturer’s specifications @6kg/10 Sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification CI 502 & 112 (Including cleaning of road surface) — Qty: 11060 sqm
- Providing and applying tack coat on the prepared surface,with bitumen emulsion RS-1 as per IS : 8887 & manufacturer’s specifications@2kg /10sqm.With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Clause 503 & 112 ( Including cleaning of bituminous road surface ) — Qty: 11060 sqm
- Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 500-8 &500-10 and design mix for base/binder course including loading of material with Front end loader, heating of binder(including cost of anti-stripping compound wherever required) aggregate and filler as per table 500-9, In hotmix plant More than 60-90 TPH, transporting the mixed material by tippers and laying with sensor paver finisher as per clause 505.3.5 to the required level and grade rolling by self propelled power roller sand vibratory rollers or pneumatic tyred roller 150-250KN.TP 0.7MPa to achieve the desired density(approved by the department) but excluding cost of primer/tack coat. [MoRTHSpecification : Clause 505 & 112] with all leads Grading II (26.5mmnominal size) -Bitumen@minimum 4.5% of mix using VG40 ( thickness 50 - 75 mm ) — Qty: 718.9 cum
- Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-16 & 500-17 for wearing course including loadingof aggregate with Front end loader and hot mixing of binder(including cost of anti-stripping compound, whereverrequired) and filler as per table 500-9 with aggregates in hot mix plant More than 60-90 TPH Transporting the mixmaterial with tipper and laying with sensor paver finisher(as per clause 507.3.5) to the required level ,grades and rolling with vibratory compactor and pneumatic tyred roller 150-250KN,TP=0.7 Mpa, to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MoRTH Specification :Clause-507&112) with all lead GradingII (13.20 mm nominal size)-Bitumen @ minimum 5.40% of mix & thickness 30 - 40 mm VG 40 Grade — Qty: 442.4 cum
- Filling pot-holes and patch repairs with bituminous concrete, 40 mm with removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per Clause 503 back filling the pot holes with hot bituminous material using 60/70 grade bitumen @ 5.0%of total mix & mixed in hot mix plant 40-60 TPH capacity and carriage with all leads as per clause 509, compacting with smooth wheel roller 8-10 tonne, trimming & finishing the surface to form a smooth continuous surface, all as per MoRTH specification Clause 3004.2 — Qty: 29340.41 Sqm
- Clearance of landslides in soil and ordinary rock by a bull- dozer D 80 A-12 , 180 HP and disposal of the same on the valley side as per MoRTH specification Clause 3000. — Qty: 17300 cum
- Providing and laying marking of center line and stop line etc with hot thermoplastic compound of approved quality with type-1 glass beeds (Table-800-9) , 2.5 mm thick on road/ plain surface, including reflectorising glass beads type-2 (Table-800-10) @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. — Qty: 36378.81 Sqm
- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 90 cm equilateral triangle — Qty: 188 Each
- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing,60 cm circular shape — Qty: 104 Each
- Supplying and fixing of Cat’s Eye made of aluminum alloy size 75x100x22 mm having 21 biconvex lenses embedded in circular disc of ABS plastic on each side. — Qty: 23269.4 Each
- Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ ground level, fixed on CRC rolled channel vertical post, 150 x 75 x 5 mm spaced 2 mm centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and IS: 1364 , metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MoRTH specification Clause 811.3. — Qty: 1110 Rm.
- Providing & fixing letters/ borders from reflective tape ofapproved quality of standard width (MORTH SpecificationClause 800) P & F Borders (50mm wide — Qty: 20000 Per Cm Length
- Supply of Chevron sign of size 75x60 cm made out of aluminum sheet 2 mm thick with fixing provision on M.S. angle iron post 50x50x6 mm 3 M long screwed with stainless steel nut bolts of 8 M dia, plate is covered by high intensity grade yellow retro-reflective sheeting and black screen printed arrow on Retro Reflective Sheet, complete in all respect. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom — Qty: 150 Each
3 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Improvement such as widening and strengthening of Lalitgiri Museum to Kalianti Bridge via Haribhaktapur-Jerakanda road from 0/000 km to 7/575 km in the district of Kataka under State Plan — Civil Works & Infrastructure · Odisha · ₹20.6Cr
- Renovation of Dharamshala in New Yadvindra Colony, ward no. 20 at Patiala. — Civil Works & Infrastructure · Punjab · ₹42.2L
- Lining/Relining of water course of Outlet R.D 6000-R of mr. no 4 of Newada Disty Village Talwandi Malik, Khattriwala Distt. Patiala — Civil Works & Infrastructure · Punjab · ₹60.0L
- Outsourcing of Labour Part for Erection, Testing Commissioning of New 11KVLT/HTLines on Rail/PCC Poles, Distribution T/Fs, Augmentation/Sagging of ACSR of HT/LT Lines, Cables laying, Guarding, Stay Setfor Various Works — Civil Works & Infrastructure · Punjab · ₹60.0L
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Remodelling and renovation Pond Rara Sahib Chowk Somal kheri Np Maloudh — Civil Works & Infrastructure · Punjab · ₹22.3L