SITC of MGPS work in the construction of SDH Phagi, Distt Jaipur.
Medical and Health · Jaipur, Rajasthan · Medical Equipment & Supplies · open
Key facts
- Tender value: ₹1.1Cr
- EMD: ₹2.3L
- Published: 05 Nov 2026
- Closing date: 19 Nov 2026
- Status: open
- Status as of: 07 Nov 2026 04:03 UTC
- Department: Medical and Health Department, Rajasthan
- Office: Executive Engineer, Medical and Health, Division 2, Jaipur
Description
Supply, installation, testing and commissioning of a medical gas pipeline system (MGPS) for the construction of SDH Phagi, Jaipur district, including medical gas piping, valves, outlets, flow meters, suction equipment, alarms, bed head panels and related accessories. The complete system has a five-year defect liability period.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Certifications: ISO:13485, CE, US FDA, CDSCO compliance
- Documents required: Technical data sheet of the product to be used, Copy of applicable ISO:13485/CE/US FDA standards certificate of MGPS OEM, Operation and service manual, Completion drawings, Test certificates, Compliance sheet of Manufacturer Products as per CDSCO Notification, Three sets of as-built MEP drawings, Inventory list, Detailed measurements of work for the financial bill, Testing/calibration certificates
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (32)
- 2 — Qty: 4 5
- SITC of MGPS pipe of medically grade as per BSEN-13348 with third party certification from Lloyds/TUV degreased [ie free from oil, grease and particulate matters) seamless copper pipe confirming to ASTM B88 and all copper joining done by brazing with AWSA5.8, classification BCuP-5 or BS 1845 following procedure in accordance with ASTM B828 after purging with nitrogen. All pipe cutting shall be carried out with a radial pipe cutter and copper pipe fitting's shall comply with B4 alloy designation. Adequate support shall be provided while laying pipeline testing shall be done at 17 bar and after testing pipe shall be painted with two coat of enamel paint as per colour codification as per ISO 7396-Part-1 2016.Thisd partyTest reportshall be submitted. all as per approved by Engineer in charge. — Qty: 2030.1355 Kg
- For 12 MM OD pipe — Qty: 300 Each
- For 15 MM OD pipe — Qty: 25 Each
- For 22 MM OD pipe — Qty: 25 Each
- For 28 MM OD pipe — Qty: 16 Each
- For 42 MM OD pipe — Qty: 6 Each
- For 54 MM OD pipe — Qty: 6 Each
- SITC of Gas outlet point Oxy, (AR-4), (AR-7) and Vaccum (8.7 psig) for dispeensing medical pgases (oxygen/air/Vaccum) at point of use confirming to BSEN ISO 9 170-1:2008.. The gas outlet are quick connect type. it should have colour coding for dieffrent gas source and should accept only respective adapters as required.appropriat Test Certificate/ report of product/accessories from OEM shall be submitted. The Product should be CE Certified /CE marked. — Qty: 542 Each
- SITC of BPC (back pressure compensated) flow meter with Humidifire made of nickei plated body. Double jacketed with flow gradations CE Marked on it. Desired flow will be setteided through rotary knob. Flow range shuld be between 0 to 15 lpm & work should be executed as per direction of engineer in charg. Appreoprite Test Certificate / report of product /accessories from OEM shall be submitted. The Product should be CE Certified/ CE Marked. — Qty: 114 Each
- SITC of ward suction unit (Sution Controller and Collevtion Jar - 600 ml caapicity) with posibility to configure required capcity collection Jar and should meets the reuirements as per BSEN ISO 10079-3:2009. The unit must designed to operate with the vaccum line of MGPS. The collection jar must accumpained with Vaccum regulator suitable for 0-14.7 psig with flow rate 0-55 lmp (min)for operating tempurature - 18 °C to 50 °C with ON/OFF facility. The collection Jar should be transparent, made of hogh quality polycarbonate that can be autoclaved at 121 °C for 20 minuts for reuse and provided with auto stop to avoid over spill and contamination of the suction source when the jar collection reached optimized level. The completer unit supplied with filter to protect the source and pipe line from baceterial contamination. Appropriate Test Certificate / report of product/ accessories from OEM shall be submitted . The Product shpuld be CE Certificate / CE marked — Qty: 114 Each
- Suction troly — Qty: 5 Each
- For Three gas — Qty: 20 Each
- For Four gas — Qty: 5 Each
- For Three Gas Services — Qty: 20 Each
- For Four Gas Services — Qty: 1 Each
- SITC of Bed Head Panel of 900 -1500 MM long made out from high strength extruded aluminium with powder coating with at least 4 nos 6/16 Amp switch socket and provision for required number of gas outlet points as suggested by the client. Appropriate Test Certificate/report o product/accessories from OEM shall be submitted. The Product shpuld be CE Certificate / CE marked. All as per approved engineer incharge. — Qty: 108 Each
- Providing and fixing of Rail clamp for mountin ward vaccum unit on bed head panel com Plete as required' — Qty: 108 Each
- SITC of Color Coded high Pressure RubberTube for Positive Pressure Gases / vacuum. Appropriate Test Certificate/report o product/accessories from OEM shall be submitted. The Product shpuld be CE Certificate / CE marked. All as per approved engineer incharge. — Qty: 300 Each
- Utility Basket — Qty: 108 Each
4 tender document(s) available — sign up to download.
Related tenders
- BRAIN ENDOSCOPY SYSTEM — Medical Equipment & Supplies · Maharashtra
- Annual Rate contract for Procurement of Requisite Material for CSSD Department at Hinduhridaysamrat Balasaheb Thackeray Medical College Juhu Vile Parle W Mumbai — Medical Equipment & Supplies · Maharashtra · ₹1.0Cr
- Procurement of Aerogen Solo Convenience Kit for the Dept of Anesthesiology on PAC Basis at AIIMS Bhubaneswar — Medical Equipment & Supplies · Odisha
- Fully Automatic Biochemistry Analyzer (V2) — Medical Equipment & Supplies · Chhattisgarh · ₹25.0L
- Full Endoscopic Spine Surgery System — Medical Equipment & Supplies · Puducherry
- Echo Cardiography Scanning Machine (V2) (15 pieces) — Medical Equipment & Supplies · West Bengal
- Electromechanical Platform and High-end Auxiliary for Multispecialty Procedures as per Specification — Medical Equipment & Supplies · Maharashtra
- Supply of Heater Wire Adaptor Dual Heated and Temperature Probe — Medical Equipment & Supplies · Chhattisgarh · ₹3.2L