SITC of Lift/Elevator work in Administrative Block at Old Hospital Building District Hanumangarh
Rajasthan State Road Development & Construction Corporation Limited · Hanumangarh, Rajasthan · Electrical Equipment & Supplies · open
Key facts
- Tender value: ₹15.1L
- EMD: ₹30K
- Published: 13 Oct 2026
- Closing date: 22 Oct 2026
- Status: open
- Status as of: 22 Oct 2026 03:57 UTC
- Department: Rajasthan State Road Development & Construction Corporation Ltd. (RSRDC), Electrical Unit-Sikar
- Office: Electrical Unit-Sikar
Description
Supply, installation, testing and commissioning of lift/elevator work in the Administrative Block and Drug Store at the Old Hospital Building, Hanumangarh. The estimated tender value is Rs. 1,505,000; the engineering cost is Rs. 1,715,007.36. EMD, tender fee and processing fee are payable separately by NEFT/RTGS/IMPS.
Eligibility & requirements
- Past performance: 50%
- Startup relaxation: No
- MSE relaxation: No
- Certifications: Electrical Inspector license
- Documents required: Proof of EMD, tender cost and processing fee deposited by the participating firm, Name and address of firm with complete contract details, Type of organization and supporting registration documents, Registration details with State Government/Central Government/Semi-Government Engineering Department, Electrical Inspector license, Work experience proof for work of 50% value of tender cost in the last five financial years, GST registration, PF registration certificate, Income Tax Registration Certificate (PAN card), Proof of purchase of electrical items from an authorized dealer, distributor or manufacturer
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Evaluation: Percentage rate tender; one percentage rate above or below Schedule G rates
- Make in India (MII): No
- MSE preference: No
Line items (55)
- Electric BSR 2022 (Part A) — Qty: 0.0001 Each
- Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . — Qty: 629.874 Kg
- Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level — Qty: 0.0001 Each
- 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 17 Cum.
- Plaster on new surface on wall in cement sand mortar 1:4 including racking of joints etc. complete fine finish : — Qty: 0.0001 Each
- 12mm thick — Qty: 25 Sqm
- Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR — Qty: 0.0001 Each
- Short point (up to 3 mtr.) — Qty: 1 P. point
- Medium point (up to 6 mtr.) — Qty: 1 P. point
- Long point (up to 10 mtr.) — Qty: 2 P. point
- Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR — Qty: 0.0001 Each
- On board — Qty: 4 P. point
- Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached with this BSR — Qty: 4 Each
- Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR — Qty: 0.0001 Each
- 2 x 2.5 sq. mm. + 1x1.5sqmm — Qty: 50 Mtr.
- 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. — Qty: 50 Mtr.
- Providing & Fixing of IP65 IK08 rated Integrated SMD Mid power LED bulk head type light fixture made from Pressure Die Cast AL housing suitable with integral driver, system lumen efficacy ≥100 lm/Watt output , THD < 10% ,p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. surge protection 4 KV. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . — Qty: 0.0001 Each
- Minimum lumen output 1000 lm — Qty: 4 Each
- Supply and installation of high tensile low carbon steel rod molecularly bonded with 99.9 % Copper thickness (250 microns) and confirming to UL 467, IS/IEC 62561-2 of following size and length and as per point mentioned (a), (b), [c), (d), (e) below :- — Qty: 0.0001 Each
- (a) Bore a hole of dia. 100 mm of required length, Place the rod in the centre of Hole — Qty: 0.0001 Each
9 tender document(s) available — sign up to download.
Related tenders
- SUPPLY OF V.F TRANSFORMER OF RATIO 470:600 OHMS (CYLINDER TYPE) — Electrical Equipment & Supplies · Madhya Pradesh
- Handheld Rechargeable Pocket Torch — Electrical Equipment & Supplies · Madhya Pradesh
- Procurement of Digital Dial Indicator and Stainless Steel Flexible Magnetic Base stand — Electrical Equipment & Supplies
- Contact Lever Complete of Tap Changer to M/s. REPL's Pt. No. - S-2506 or to RDSO's Drg. No. - SKEL-4659 (Alt. - 1) — Electrical Equipment & Supplies · West Bengal
- Supply, Installation, Testing and Commissioning of standalone IP-CCTV cameras system at Digital Library, Main Building, TMH — Electrical Equipment & Supplies · Maharashtra · ₹6.1L
- PROCUREMENT, SUPPLY, INSTALLATION, TESTING AND COMMISIONING OF LED TRACK 24 MTR — Electrical Equipment & Supplies · Maharashtra
- Supply and Installation of Illuminated Name Board with LED Back Light Letters — Electrical Equipment & Supplies · Maharashtra
- HIRING OF SERVICES FOR INTERNAL CIRCUIT WIRING, SWITCH BOARD FITING AND ENERGY EFFICIENT LED POINT C — Electrical Equipment & Supplies · Maharashtra