Road Safety Measures from Km 54.260 to Km 74.400 Pimpali Bu. to Kumbharli Ghatmatha section of NH.166 E in the State of Maharashtra during 2026.27.

NH Division-Ratnagiri - MoRTH · Ratnagiri, Maharashtra · Civil Works & Infrastructure · open

Key facts

Tender value: ₹6.5Cr
EMD: ₹13.0L
Published: 27 Oct 2026
Closing date: 20 Nov 2026
Status: open
Status as of: 01 Nov 2026 22:59 UTC
Ministry: Ministry of Road Transport and Highways
Department: P6 Delhi - MoRTH
Office: NH Division-Ratnagiri

Description

Road safety works on the NH-166 E section from Km 54.260 to Km 74.400 between Pimpali Bu. and Kumbharli Ghatmatha in Maharashtra, including excavation, concrete and reinforcement works, crash barriers, road delineators, painting and related works.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Make in India (MII): No
MSE preference: No

Line items (15)

Item No-1Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. (Item No. 2.11) — Qty: 5616.88 cubic metre
Item No-2 Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed. (Item No. 2.14) — Qty: 965.13 cubic metre
Item No-3 Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. (Item No. 2.16) — Qty: 351.75 cubic metre
Item No-4 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. (Item No. 21.40) — Qty: 559.88 cubic metre
Item No-5 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. (Item No. 21.38) — Qty: 464.1 cubic metre
Item No-6 Providing and laying PCC in M15 grade levelling course of 100 mm thick below pile cap M.O.R.T and H - Pile with fully automatic micro processor PLC with SCADA enabled reversible drum type 1100, 1700 mixer/ concrete batch mix plant (pan mixer) etc. complete. (Item No. 15.13) — Qty: 862.35 cubic metre
Item No-7 Providing and laying in situ / ready mix / ready mix M25 RCC work with trap/ granite/ quartzite/ gneiss metal in well steining including shuttering, compacting by vibrating, finishing and curing etc. complete. (fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ), excluding reinforcement) (Item No. 12.38) — Qty: 2069.9 cubic metre
Item No-8 Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. (Item No. 14.01) — Qty: 126.67 metric tonne
Item No-9 Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc (Item No. 17.37) — Qty: 700 Running meter
Item No-10 Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) (Item No. 12.70) — Qty: 700 cubic metre
Item No-11 Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA (Item No. 11.29) — Qty: 1872 cubic metre
Item No-12 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (Item No. 35.21) — Qty: 4890 square metre
Item No-13Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat) (Item No. 35.11) — Qty: 4890 square metre
Item No-14 Metal Beam Crash Barrier -- Type - B, THRIE : Metal Beam Crash Barrier (Providing and erecting a Thrie metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 810)"" (Item No. 7.31) — Qty: 1200 Running meter
Item No-15 Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H clause 806.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting shall be pasted on both sides. The delienator shall consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification.The front and back faces of the delineator should be curved with a radius of not more than 200 — Qty: 320 Number

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L