Resurfacing of SH 62 from Km 98.14 to 108.00 Haveri Sagar section connecting via Lingapura Chikkeruru Hirekaruru Shiralakoppa in Sagara constituency Shivamogga District. (Job No.CRIF-KNT-2026-27-096)

National Highways, Karnataka · Shivamogga, Karnataka · Civil Works & Infrastructure · open

Key facts

Tender value: ₹4.9Cr
EMD: ₹7.3L
Published: 23 Oct 2026
Closing date: 23 Nov 2026
Status: open
Status as of: 31 Oct 2026 03:11 UTC
Ministry: Ministry of Road Transport and Highways
Department: Karnataka Public Works Department
Office: Office of the Executive Engineer, National Highway Division, Shivamogga

Description

Resurfacing of SH 62 from Km 98.14 to 108.00 on the Haveri–Sagar section via Lingapura, Chikkeruru, Hirekaruru and Shiralakoppa in Sagara constituency, Shivamogga District. Estimated work value is Rs. 485.65 lakh exclusive of GST. Completion period is 6 months, with a defect liability period of 2 years.

Eligibility & requirements

Past performance: 50%
Startup relaxation: No
MSE relaxation: No
Certifications: UDIN-generated turnover certificate
Documents required: Turnover certificate with UDIN generated through ICAI Portal, Chartered Accountant confirmation letter with UDIN generated through ICAI Portal, Work Done Certificate bearing Work Indent Number and issued by an officer not below the rank of Executive Engineer, Liquid assets and/or credit facility certificate from a Nationalized Bank, Scanned copy of EMD Bank Guarantee or FDR, Machinery ownership, lease or hire documents, where applicable

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Evaluation: Evaluation and comparison of tenders; award to the lowest evaluated responsive tender
Make in India (MII): No
MSE preference: No

Line items (31)

2 — Qty: 4 5
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness including all labour, usage charges of all machineries Including cost and conveyance of all materials with hire charges of machinery and equipment, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. For New roads in area of light jungle by mechanical means — Qty: 1.25 Ha
Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil by hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location, with all lifts and lead up to 1000m including all labour, load, unload, usage charges of all machinery etc., complete all other incidental charges complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. — Qty: 3124.8 Cum
Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 tonne smooth wheeled roller, complete as per clause 310, including all labour, usage charges of all machinery, materials etc., complete - Including cost and conveyance of all materials with hire charges of machinery and equipment, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. — Qty: 3906 Sqm
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete, all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. Grading-V Closed graded 200mm compacted Thickness — Qty: 781.2 Cum
Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base /base course on well prepared surface and compacting with vibratory roller to achieve the desired densityof 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete, Laying using Grader Wet Mix Macadam (Plant Mix Method), 250 mm Compacted thickness all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. — Qty: 418.5 Cum
Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per table-500-3, including cost of all materials, labour, usage charges of all machinery, loading & unloading Transportation charges etc., complete, all other incidental charges , as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. — Qty: 2790 Sqm
Providing and applying tack coat with VG-10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., complete, with all lead & lift, transportation charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. — Qty: 30290 Sqm
Dense Graded Bituminous Macadam-Grading II- Providing and laying dense graded bituminous macadam with higher capacity batch plant type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, excluding cost of Primer/Tack coat 50-75 mm compacted thickness. and all other incidental charges etc., complete as per standard tec — Qty: 1744.52 Cum
Bituminous Concrete with Grading -II Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, excluding cost of primer/tack coat 30-40 mm compacted thickness and all other incidental charges etc., complete as per standard technical — Qty: 919.33 Cum
Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment including all labour, load, unload usage charges of all machineries etc., complete. A. Mechanical Means and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. — Qty: 3600 Rmtr
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. - Including cost and conveyance of all materials with hire charges of machinery and equipment and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. — Qty: 1147 Sqm
Providing and laying of hot applied thermoplastic compound 10 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 10 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. — Qty: 32.4 Sqm
Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.20 mm thick, 3.60mtrs hight, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing Finishing neatly including supply to the site of work , including curing concrete work , cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. - Including cost and conveyance of all materials with hire charges of machinery and equipment, with all lead & lift, loading and unloading charges, transportation charges, labour charges and all other incidental charges etc — Qty: 16.2 Sqm
Providing and erecting Project Display Board of size 1.80 verticalx1.60M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6mm thickness) sheeting sthrenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frameworks, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.8M from ground level as per approved drawing (Excluding cost of lettering) including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete — Qty: 2 Each
A(ii) 90 cm equilateral triangle — Qty: 16 Each
A(xi) 60x50 cm rectangular — Qty: 8 Each
Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including cost of all materials all labour, lead, lifts, loading, usage charges of machinery, unloading transporting etc., complete all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. (Ordinary Kilometer stone (Precast) — Qty: 5 Each
Road Delineators. Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15cm wide strips, fitted with 80*100mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings, including cost of all materials all labour, lead, lifts loading, unloading transporting etc., complete all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. — Qty: 40 Each
Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25-1967, fixed in position including finishing and lettering but excluding painting, including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work. — Qty: 20 Each

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L