Resurfacing of SH 305 from ch.51.80 to 56.80 km Haradhanahalli-Chennamallipura section in Gundlupet Taluk (Job No. CRIF-KNT-2026-27-003)

National Highways, Bengaluru · Haradhanahalli, Karnataka · Civil Works & Infrastructure · open

Key facts

Tender value: ₹2.8Cr
EMD: ₹4.3L
Published: 14 Oct 2026
Closing date: 18 Nov 2026
Status: open
Status as of: 24 Oct 2026 05:51 UTC
Ministry: Ministry of Road Transport and Highways
Department: Karnataka Public Works Department
Office: Office of the Executive Engineer, National Highway Division, Bengaluru

Description

Resurfacing of a 5 km section of State Highway 305 between Haradhanahalli and Chennamallipura in Gundlupet Taluk, including road earthworks, granular sub-base, wet mix macadam, bituminous layers, road markings, kilometre stones and traffic signs. Estimated work value is Rs. 283 lakh excluding GST, with a completion period of 6 months.

Eligibility & requirements

Past performance: 50%
Startup relaxation: No
MSE relaxation: No
Certifications: UDIN on turnover certificate and Chartered Accountant confirmation letter
Documents required: Tenderer registration as a KPWD Civil registered Contractor, Turnover certificate with UDIN generated through ICAI Portal, Chartered Accountant confirmation letter with UDIN generated through ICAI Portal, Work Done Certificate bearing Work Indent Number and issued by an officer not below the rank of Executive Engineer, Evidence of ownership for required machinery, including purchase invoices or sale deeds and applicable RTO registration, fitness and tax certificates, Lease or hire agreements and supporting ownership/invoice documents for machinery proposed on lease or hire, Unconditional letter of credit or credit-facility certificate from a Nationalized bank for liquid assets or credit facilities of at least Rs. 141.50 lakhs, Earnest Money Deposit in the form of Bank Guarantee or FDR, with scanned copy uploaded and original submitted, Tender document fee payment proof and GST Demand Draft proof, Details of existing commitments and ongoing works countersigned by the employer in charge, not below the rank of Executive Engineer

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Evaluation: Two-cover technical qualification followed by evaluation and comparison of financial tenders
Make in India (MII): No
MSE preference: No

Line items (24)

2 — Qty: 4 5
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness including cost of all materials, labour, uasage charges of machinery, loading & unloading, all lead and lift with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work By Mechanical Means, In area of Light jungle. — Qty: 0.69 Ha
Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment including loading & unloading, all lead and lift with all other incidental charges etc., all labour, usage charges of all machinery complete..as per the direction of the Engineer-In-Charge for successful completion of work .Mechanical Means — Qty: 2000 Rmtr
Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material including cost of all materials, labour, hire charges of machinery, loading & unloading transportyation, all lead and lift with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work . By Mechanical Means using Hydraulic excavator . — Qty: 3916 Sqm
Compacting original ground supporting sub grade Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for subgrade construction including cost of all materials, labour, usage charges of machinery, loading & unloading, all lead and lift with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work . — Qty: 1201.5 Cum
Construction of Embankment with Material obtained from Borrow pits Construction of embankment with approved material obtained from borrow pits laid in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross section including watering, consolidation by roller to the desired field density not less than 95% of maximum dry density including all labour, usage charges of all machinery material loading & unloading, all lead and lift with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work as per table 300-2 . — Qty: 1201.5 Cum
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., spreading by Dozer, grading by motor grader, consolidation by vibratory road roller and carriage by tipper including loading & unloading, all lead and lift, labour, usage charges of machinery with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work .. — Qty: 2296 Cum
Granular Sub-Base with Close /Coarse Graded Material (Table:- 400-1) Plant mix method.Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road,including loading & unloading, all lead and lift with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work ..(Compacted thickness)Grading-V Material (Close graded) As per job mix. — Qty: 1308.3 Cum
Construction of Wet Mix Macadum(Plant mix method) :providing laying, spreading and compacting of graded stone aggregates as per Table 400-12 & 400-13, to wet mix maacadam specification including pre mixng the material with water at OMC in mechanical mix plant , carriage of mixed material by tipper to work site , layin in uniform layers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of machinery, lighting, guarding, barricading, maintenance of diversion road, ,including loading & unloading, all lead and lift with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work Laying Using Motor Grader . (Compacted Thickness). As per Job Mix — Qty: 1268.25 Cum
Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per table-500-3, including cost of all materials, labour, usage charges of machinery, with all lead , lift, transportation, loading, unloading stacking, Cost of material & labour charges usage charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work . — Qty: 4895 Sqm
Tack Coat on Granular surfaces treated with primer Providing and applying tack coat with bitumen emulsion (RS-1) pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of machinery, incl;uding with all lead, lift, transportation, loading, unloading stacking, Cost of material & labour charges usage charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work . — Qty: 4895 Sqm
Tack coat on Bituminous surface Providing and applying tack coat with VG-10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, & dusting by air compressor and spraying including cost of all materials, labour, usage charges of machinery, loading, unloading stacking, Cost of material & labour charges with all other incidental charges etc., all lead, lift, transporatation complete and as per the direction of the Engineer-In-Charge for successful completion of work . — Qty: 11175 Sqm
Dense Graded Bituminous Macadam Grading -II Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials, labour, usage charges of machinery, loading, unloading stacking, Cost of material & labour charges usage charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful com — Qty: 820 Cum
Bituminous Concrete Grading -II Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including all lead, lift, transportation cost of all materials, labour, usage charges of machinery, loading, unloading stacking, Cost of material & labour charges usage charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charg — Qty: 482.1 Cum
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffic control, including cost of all materials, labour, hire charges of machinery, all lead, lift, transportation, loading, unloading stacking, with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work . — Qty: 578 Sqm
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including cost of all materials, labour, usage charges of machinery, all lead, lift , transporatation, loading, unloading stacking, with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work . (i)Ordinary kilometre stone (precast) — Qty: 3 Each
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including cost of all materials, labour, usage charges of machinery, all lead, lift , transporatation, loading, unloading stacking, with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work . (i) 200 Meter stone Hectometer stone (precast) — Qty: 12 Each
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc complete with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work (i) 90 cm equilateral triangle. — Qty: 6 Each
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc complete with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work (ii)90 cm circular. — Qty: 4 Each
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc complete with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work(iii)60 cm x 45 cm rectangular — Qty: 4 Each

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L