Replacement of damaged fire resistant MS doors in TG Hall and at the approaches to Control Room-I and II and other misc works at DCRTPP HPGCL Yamuna Nagar

Haryana Board Corporation · Yamuna Nagar, Haryana · Civil Works & Infrastructure · open

Key facts

EMD: ₹39K
Published: 13 Oct 2026
Closing date: 09 Nov 2026
Status: open
Status as of: 04 Nov 2026 06:13 UTC
Department: HPGCL
Office: DCRTPP WYC Yamunanagar

Description

Works tender for replacement and installation of fire-resistant MS single and double doors, dismantling and disposal of damaged doors, and associated HPL and miscellaneous civil works at DCRTPP, HPGCL, Yamuna Nagar.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Make in India (MII): No
MSE preference: No

Line items (18)

Providing and fixing of MS Fire Resistant Single door (As per approved fire safety norms) suitable for installation in TG Hall/ Plant buildings, fabricating from heavy duty MS RHS frame of minimum size 80x25 mm (or equivalent approved section) with internal and horizontal stiffeners. The single door shutter made of double skin MS Sheet/ Plate of minimum 3mm thickness, fully welded and insulated with non-consumable high density rockwool/mineral wool insulation of suitable density and thickness to achieve the fire resistant capacity including complete all fitting accessories such as MS hinges, tower bolts, sliding bolts, door closure, door stopper, handles and locking arrangements, all necessary hardware, welding, grinding, cutting, drilling. Replacement of support frame using RHS 80x25mm with welded in angular section with complete in all respect as per direction of Engineer-In-Charge. — Qty: 24 Nos.
Providing and fixing of MS Fire Resistant Double door (As per approved fire safety norms) suitable for installation in TG Hall/ Plant buildings, fabricating from heavy duty MS RHS frame of minimum size 80x25 mm (or equivalent approved section) with internal and horizontal stiffeners. The double door shutter made of double skin MS Sheet/ Plate of minimum 3mm thickness, fully welded and insulated with non-consumable high density rockwool/mineral wool insulation of suitable density and thickness to achieve the fire resistant capacity including complete all fitting accessories such as MS hinges, tower bolts, sliding bolts, door closure, door stopper, handles and locking arrangements, all necessary hardware, welding, grinding, cutting, drilling. Replacement of support frame using RHS 80x25mm with welded in angular section with complete in all respect as per direction of Engineer-In-Charge — Qty: 4 Nos.
Dismantle of old damaged fire resistant single doors with frames and dispose in DCRTPP Store complete in all respect. — Qty: 24 Nos.
Dismantle of old damaged fire resistant double doors with frames and dispose in DCRTPP Store complete in all respect. — Qty: 4 Nos.
Providing and fixing 6 mm thick Exterior Grade HPL sheet of approved make, colour, shade and finish, including providing and fixing MS supporting framework of 25 mm × 50 mm × 2 mm rectangular hollow section/tube and MS angles of suitable size, complete with cutting, welding, drilling, grinding, alignment and protective painting: fixing of HPL panels with approved 3M or equivalent double-sided high-strength mounting tape and SS screws/self-tapping screws of suitable size, including SS washers, PVC wall plugs/fasteners wherever required: providing and applying approved weather-resistant neutral-cure silicone sealant at joints, edges and corners: including all necessary cut-outs, edge/corner finishing, joint treatment, scaffolding, tools and tackles, labour, transportation, wastage up to 5%, and all other incidental works required for proper and complete installation of HPL as per site requirements and directions of the Engineer-in-Charge, complete in all respects. — Qty: 81.44 Sqm
[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand). — Qty: 93.6 Sqm
[11.73.1]Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer`s specifications including appropriate priming coat, preparation of surface, etc. complete. 1. On steel work. — Qty: 158.733 Sqm
[12.102.1]Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 1. 125 mm. — Qty: 18 Each
[12.103.1]Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 1. Single rubber stopper. — Qty: 18 Each
[12.157.1.1]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 1.1. For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). — Qty: 90 Kg.
[12.157.2.1]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.1. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gask — Qty: 160 Kg.
[12.158.2]Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 2. Pre-laminated particle board with decorative lamination on both sides. — Qty: 18.72 Sqm
[12.159.2]Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 2. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm). — Qty: 18.72 Sqm
[12.89]Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.. — Qty: 18 Each
[12.98.1]Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 1. 300x16 mm. — Qty: 18 Each
[12.99.2]Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 2. 250x10 mm. — Qty: 18 Each
[6.1.1]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). — Qty: 2.044 cum
[7.22.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 1. Cement mortar 1:4 (1 cement : 4 coarse sand). — Qty: 10.764 cum

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L