Repairs to existing line barrack/ warden line (sanitary work and window shutters) at District Jail Anantnag.
J&K Police Housing Corporation · Anantnag, Jammu and Kashmir · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹2.7L
- EMD: ₹5K
- Published: 29 Oct 2026
- Closing date: 16 Nov 2026
- Status: open
- Status as of: 09 Nov 2026 02:42 UTC
- Department: J&K Police Housing Corporation
- Office: Executive Engineer Police Housing Corporation Kashmir Division, Srinagar
Description
Repair work at District Jail Anantnag covering plastering, putty and painting, repair and replacement of door and window shutters and hardware, and sanitary plumbing work.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (33)
- Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) — Qty: 78.81 Sqm
- Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm to 2mm thick — Qty: 78.81 Sqm
- Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer — Qty: 78.81 Sqm
- Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. — Qty: 359.566 Sqm
- Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. — Qty: 40 No.
- Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt- hinges bright finished of required size with necessary screws. all complete as per direction of engineer- in charge. 35mm thick. Kiln seasoned and chemically treated hollock wood — Qty: 13.17 Sqm
- Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size Kiln seasoned and selected planks of sheesham wood. — Qty: 17.98 Sqm
- Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) — Qty: 31.16 Sqm
- (A )Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm — Qty: 6 No.
- (B )Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etccomplete.250x10 mm — Qty: 12 No.
- (C )Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etccomplete.150x10mm each — Qty: 68 No.
- (D )Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete: 125 mm — Qty: 12 No.
- (E )Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete: 75 mm — Qty: 34 No.
- Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap. — Qty: 4 No.
- 100mm dia pipe — Qty: 12.2 Rmt
- 75mm dia pipe — Qty: 24.39 Rmt
- Double unequal junction of required degree 100x100x75x150 with door insertion — Qty: 4 No.
- Single unequal junction of required degree 75x100x100x100 with door insertion — Qty: 4 No.
- Plain bend of required degree 75mm — Qty: 4 No.
- Plain bend of required degree 100mm — Qty: 4 No.
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L