Repairing of Shed Near Diversion Tunnel Gate and Other Miscellaneous Work at Baira Dam of BSPS.
NHPC Limited · Chamba, Himachal Pradesh · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹10.2L
- EMD: ₹20K
- Published: 10 Nov 2026
- Closing date: 02 Dec 2026
- Status: open
- Status as of: 13 Nov 2026 01:03 UTC
- Office: Baira Siul Power Station, Surangani
Description
Civil repair work at Baira Dam of Baira Siul Power Station, including shed repairs and miscellaneous civil works. Estimated cost including GST is Rs. 10,21,445.00; completion period is four months.
Eligibility & requirements
- Past performance: 80%
- Startup relaxation: No
- MSE relaxation: No
- Documents required: Valid contractor registration or company registration documents, including constitution/legal status, place of registration and principal place of business, Power of attorney of the bid signatory, Form-1 General Information, Form-3 Work Experiences Record, Work experience certificates from the Engineer-in-charge/Project head; for private works, TDS Certificates/Form 26AS/Annual Information Statement (AIS), Form-4 Annual Construction Turnover, CA affidavit/certificate with UDIN for annual construction turnover for the last three years, Annual reports or financial statements for the past three years, Proposed methodology (Schedule-G), construction programme (Schedule-E), and equipment planning and deployment (Schedule-F), PAN, GST Registration, EPF Registration and ESIC Registration (as applicable), Form-5 declaration that bid information is correct, Letter(s) of award, BOQ, scope of work and completion certificate(s) for similar work, Make in India local content undertaking/self-certificate and details of local value-addition locations, Self-declaration regarding banning, delisting, blacklisting or debarment, Signed Integrity Pact
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Single Stage -Two Part Bidding Basis
- Evaluation: Item Rate/Percentage Rate
- Make in India (MII): Yes
- MSE preference: No
Line items (31)
- 2 — Qty: 3 4
- Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. Ordinary rock — Qty: 34.05 Cum
- Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) — Qty: 9.09 Cum
- Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. — Qty: 2.24 Cum
- Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm — Qty: 52.15 Sqm
- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) — Qty: 25.09 Cum
- Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform. — Qty: 104.96 Sqm
- Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). — Qty: 4.49 Cum
- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inpositionand binding all complete above plinth leve.Thermo-MechanicallyTreatedbarsofgrade Fe-500D or more. — Qty: 357.96 Kg
- Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) — Qty: 31.16 Sqm
- 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) — Qty: 14.96 Sqm
- Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. — Qty: 96.88 Sqm
- Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. — Qty: 392.11 Sqm
- 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) — Qty: 137.82 Sqm
- Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. — Qty: 1171.7 Kg
- Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces — Qty: 4.67 Sqm
- Providing wood work in frames of doors, windows, clerestorywindowsandother frames, wrought framed and fixed inpositionwithhold fast lugsor withdash fastenersof requireddia& length ( hold fast lugsor dash fastener shall be paid for separately).Second class teak wood — Qty: 0.08 Cum
- Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutters, Second class teak wood. — Qty: 1.08 Sqm
- Providing and fixing ISI marked flush door shutter conforming to IS : 2202 (Part I) decorativetype, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. — Qty: 2.05 Sqm
- Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10 mm — Qty: 2 Each
2 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Improvement such as widening and strengthening of Lalitgiri Museum to Kalianti Bridge via Haribhaktapur-Jerakanda road from 0/000 km to 7/575 km in the district of Kataka under State Plan — Civil Works & Infrastructure · Odisha · ₹20.6Cr
- Renovation of Dharamshala in New Yadvindra Colony, ward no. 20 at Patiala. — Civil Works & Infrastructure · Punjab · ₹42.2L
- Lining/Relining of water course of Outlet R.D 6000-R of mr. no 4 of Newada Disty Village Talwandi Malik, Khattriwala Distt. Patiala — Civil Works & Infrastructure · Punjab · ₹60.0L
- Outsourcing of Labour Part for Erection, Testing Commissioning of New 11KVLT/HTLines on Rail/PCC Poles, Distribution T/Fs, Augmentation/Sagging of ACSR of HT/LT Lines, Cables laying, Guarding, Stay Setfor Various Works — Civil Works & Infrastructure · Punjab · ₹60.0L
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Remodelling and renovation Pond Rara Sahib Chowk Somal kheri Np Maloudh — Civil Works & Infrastructure · Punjab · ₹22.3L