Repair, Renovation work at Delhi Institute of Hotel Management, Lajpat Nagar-IV, New Delhi under South-East(Bldg.)M., Hauz Khas, New Delhi, during 2026-27

Public Works Department||CE/SE/M4-M42||EE/M421 · New Delhi, Delhi · Civil Works & Infrastructure · open

Key facts

Tender value: ₹2.1Cr
EMD: ₹4.3L
Published: 19 Sep 2026
Closing date: 26 Sep 2026
Status: open
Ministry: Public Works Department
Office: CE/SE/M4-M42

Description

Tender for repair and renovation work at Delhi Institute of Hotel Management, Lajpat Nagar-IV, New Delhi, including civil works such as excavation, concrete, brickwork, stone and tile flooring, plumbing, painting, and miscellaneous repairs, scheduled for 2026-27.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Open Tender
Make in India (MII): No
MSE preference: No

Line items (60)

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m — Qty: 16 mtr
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level — Qty: 2 Cum
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level — Qty: 4 Cum
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level — Qty: 352 Kg
Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints — Qty: 54 metre
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 — Qty: 50 Cum
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in cement mortar 1:4 — Qty: 54 Sqm
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3, including pointing in white cement with an admixture of pigment to match the stone shade — Qty: 60 sqm
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4, joints treated with white cement, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels — Qty: 39 Sqm
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of cement mortar 1:3 including pointing in white cement mortar 1:2 with pigment matching the stone shade — Qty: 16 sqm
Red sand stone - exposed face fine dressed with rough backing — Qty: 16 sqm
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622, of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry, including pointing in white cement mixed with pigment of matching shade — Qty: 1202 sqm
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws — Qty: 31 sqm
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer — Qty: 15 each
Providing and fixing ISI marked aluminium butt hinges anodised — Qty: 240 each
Providing and fixing aluminium tower bolts, ISI marked, anodised — Qty: 60 each
Providing and fixing aluminium handles, ISI marked, anodised — Qty: 60 each
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws — Qty: 80 each
Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) — Qty: 80 each
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work — Qty: 836 Kg

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
NAGAR PANCHAYAT NYOTANI UNNAO KE WARD JAVAHAR NAGAR ME SHAUKAT ALI KI DUKAN SE MUNNA KE DUKAN TAK CC ROAD VA NALI NIRMAN KARYA — Civil Works & Infrastructure · Uttar Pradesh
Proposed compound wall construction at Ganapathy colony Main road NNMP shed in div 122, unit 26, zone-9 — Civil Works & Infrastructure · Tamil Nadu · ₹2.7L
Repair Works to Radha Krishna HOR at NITW — Civil Works & Infrastructure · Telangana · ₹9.1L
Prabhag Kr. 24 D , Magalwar, Kasaba Peth Madhe Vividh Thikani Drainage Lines Chambers Durusti Karane — Civil Works & Infrastructure · Maharashtra · ₹8.4L
Operation and maintenance of Borewell 21 Nos for 12 Months in Ward No 46 Central Zone — Civil Works & Infrastructure · Tamil Nadu · ₹12.6L
IMPROVEMENT TO NH 753 BIRSI TO SUKDI KHADIPAR GOREGAON TO NH 753 ROAD SH 714 KM 12/00 TO 18/00 TAH. TIRORA DIST GONDIA — Civil Works & Infrastructure · Maharashtra · ₹2.5Cr
Project for the construction work of 6 units of Type-3 G Plus 2 residential quarters for Junior Engineers of the Irrigation Workshop Division in Jhansi District — Civil Works & Infrastructure · Uttar Pradesh · ₹3.4Cr