Repair and maintenance water supply booster and tubewell chamber at Lake Sports Complex U.T., Chandigarh
Chandigarh Administration · Chandigarh · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹6.6L
- EMD: ₹13K
- Published: 29 Sep 2026
- Closing date: 09 Oct 2026
- Status: open
- Department: Public Health Division
- Office: Engineering
Description
Repair and maintenance of water supply booster and tubewell chamber at Lake Sports Complex, Chandigarh, including civil works, excavation, concrete, brick work, flooring, painting, glazing, and disposal of debris.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (16)
- Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. — Qty: 6 cum
- Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) — Qty: 1.5 Cum
- Cement mortar 1:6 (1 cement : 6 coarse sand — Qty: 6.02 Cum
- Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) — Qty: 33.22 SQM
- 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) — Qty: 20 SQM
- Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture — Qty: 15 sqm
- Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete — Qty: 110.57 SQM
- Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. — Qty: 110.57 SQM
- Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. — Qty: 132.71 Sqm.
- Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) — Qty: 2 sqm
- Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved — Qty: 5 Cum
- Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm — Qty: 2 Each
- Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. — Qty: 3 Each
- 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay F.P.S.(non modular) brick tile of class designation 10 — Qty: 74.47 sqm
- Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. — Qty: 227.79 sqm
- 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. — Qty: 227.79 sqm
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- TTPS Operation Circle CAD ACWPH Annual Overhaulinlg DG Set III Attending minor repair works, Dismantling and Cleaning of Heat exchanger, DM water tank and Replacement of Coolant — Civil Works & Infrastructure · Tamil Nadu
- Road renovation work on the Fatehpur Minor from km 2.600 to km 5.400 — Civil Works & Infrastructure · Uttar Pradesh
- Constuction of Community Compost Pit at Purkhu Panchayat Kot Lower A Khass Block Bhalwal — Civil Works & Infrastructure · Jammu and Kashmir · ₹36K
- Services Charges for Crack Cleaning Polymer Modified Mortar Filing and Epoxy Injection Grouting in — Civil Works & Infrastructure
- OUTDOOR CONTROL DRAINAGE ARRANGEMENT — Civil Works & Infrastructure
- Expenditure on Site Preparation for Gardening and Landscape Development with Work Includes Removal — Civil Works & Infrastructure
- Custom Bid for Services - DYNAMIC BAY ALLOCATION WORKS AT HAVELI INSTALLATION — Civil Works & Infrastructure · Maharashtra · ₹3.2L