REPAIR AND MAINTENANCE OF CPP PERIPHERY ROAD

National Aluminium Company Limited (NALCO) · Angul, Odisha · Civil Works & Infrastructure · open

Key facts

Tender value: ₹1.3Cr
EMD: ₹3.5L
Published: 21 Oct 2026
Closing date: 20 Nov 2026
Status: open
Status as of: 29 Oct 2026 05:01 UTC
Department: CPP Division, Angul
Office: Tender and Contract, CPP Division, Angul

Description

Repair and maintenance of the CPP periphery road at NALCO, Angul, including road surface preparation, earthwork, pavement layers, bituminous works, concrete and drainage works, road markings, and related items.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Make in India (MII): No
MSE preference: No

Line items (25)

Scarifying metalled (water bound) :Scarifying metalled (water bound)/black top road surface including disposal of rubbish, lead upto 50mtr and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity all complete as per direction of the manager in charge.# — Qty: 20000 SQM
Surface dressing :Surface dressing of the ground on all kinds of soil including removing vegetation and inequalities not exceeding 30 cm deep and disposal of rubbish, lead up to 100 m and lift up to 1.5 m.# — Qty: 12000 SQM
Earth work in excavation over areas :Earth work in excavation over areas in all kinds of soils by mechanical means (Hydraulic excavator)/ manual means for roads, pavements etc., to required size and slope, levelling to line and grade, channelizing the water including dewatering if necessary, to keep the surface dry, stacking the useful material for reuse and disposal of unserviceable material to a lead upto 100 m and lift upto 1.5 m all complete as per specifications and directions of MIC.# — Qty: 7350 CUM
Back Filling of available excavated eart :Back Filling of available excavated earth (excluding rock) in foundations, trenches, plinths, etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by mechanical means/ manual means, ramming and watering, including loading, unloading, transportation by mechanical means all complete as per specifications and directions of MIC.# — Qty: 2750 CUM
Disposal of surplus earth :Disposal of surplus earth, dismantling materials, debris etc. generated during execution of work, including loading, unloading, transportation by mechanical means from site of work to designated areas on NALCO land lead upto 3 kms, spreading, compacting, dressing all complete as per specifications and direction of MIC.# — Qty: 7000 CUM
P/L black granite stone boulders :Providing and laying black granite stone boulders for soling/pitching and filling the interstices with Crusher dust including loading, unloading, transporting, segregating, laying, packing with spoils, preparing the surface, watering, compacting with necessary number of passes using power road roller of 8 to 10 tonne capacity. All complete as per the specifications and directions of MIC. (Payments shall be made on the basis of consolidated thickness of boulder soling)# — Qty: 600 CUM
P/L Wet mix Macadam (WMM) :Providing & Laying Wet mix Macadam (WMM) base course with stone aggregate 63mm to 40mm including stone screening, sand, binding materials and including screening, sorting, spreading to camber and gradient and consolidating with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction complete as per the specification etc complete layer thickness will be as per the instruction of Manager in charge. Measurement will be taken for compacted thcikness only.# — Qty: 850 CUM
S/T/S and spreading of Moorum :Supplying, Transporting, stacking and spreading of Moorum of approved quality and authorised sources. The rates inclusive of stacking, transporting, spreading, royality & other levies and other applicable taxes etc.# — Qty: 1200 CUM
P/L Bituminous concrete :Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specification, complete and as per directions of Engineer-in-Charge. 25/40 mm compacted thickness with bitumen of grade VG-30 as per IS:73/2006 equivalent to bitumen 60/70 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. Following materials is requried for production of 1 cum bitumenous concrete. (a)Paving asphalt of grade VG-30 of aprpoved quailiity @ 5.5%(percentage by weight of total mix 129.58 Kg. b) Stone agreegate single size:12.5mm nominal size 0.223 Cum. (c) Stone agreegate single size: 10mm nominal size 0.408 Cum. d) Ston — Qty: 850 CUM
P/L Bituminous macadam :Providing and laying Bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications, complete as per specificatons and directions of Engineer-in-Charge.- 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. Requirement of ingredients for production of 1.0 Cum bituminous macadam. (a) Paving asphalt of grade VG-30 @ 3.5% by weight of total mix 76.83 Kg.(b) Stone agreegate single size: 25mm nominal size 0.282 Cum. c) Stone agreegate single size: 10mm nominal size 0.565 Cum.(d) Stone agreegate single size: 6mm nominal size 0.282 Cum. (e) Stone chippings/ screenings 4.75mm size 0.282 Cum. Weig — Qty: 1350 CUM
Providing and applying tack coat :Providing and applying tack coat using bitumen emulsion conforming to IS :8887 using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom as per pecification and direction of manager-In-Charge: (a) On bituminous surface @ 0.25 kg/sqm.# — Qty: 42000 SQM
Carrying out field tests (bitumen conten :Carrying out field tests (bitumen content) as per relevant standards and specifications on daily basis after collecting sample of bituminous mix at HMP/site with own laboratory instruments, consummables, sieves, weighing machine with 1 gm accuracy, filter papers, benzene, etc in the presence of NALCO representative as directed by M-I-C (1 set of test includes for bitumen content tests for three sample collected jointly)(2 sets of tests or more shall be done daily as per direction of MIC — Qty: 60 SET
P/L P.C.C. (1:2:4) :Providing and laying plain cement concrete 1:2:4 (1 cement: 2 Coarse sand : 4 course aggregate 20mm nominal size) for pavement, floor concrete, plinth protection etc including the cost of all materials, tools, tackles, labour, centering, shuttering, as per drawings, all complete as per specifications and directions of MIC.(Cement shall be issued free of cost at NALCO stores).# — Qty: 600 CUM
P/L R.C.C. (1:1.5:3) :Providing and laying in position Reinforced cement concrete of proportion 1:1.5:3 (1 cement : 1.5 coarse of sand: 3 graded stone aggregate of 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement as per specification, drawing and direction of Manage-In-Charge. (Cement & steel free issue) — Qty: 10 CUM
P/F Centering, shuttering, strutting :Providing and fixing centering, shuttering, strutting, propping etc. for all types of RCC works with good quality shuttering ply of any shape and size including firmly fixing in position with screws, bolts, separators, tension devices, true to line and level, stripping off the same after specified period etc. for all depths All complete as per the drawings, specifications and directions of MIC.# — Qty: 10 SQM
P/F Cats eye/Glow studs :Providing and fixing Cats eye/Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact polystyrene)or ABS having electronically welded micro- prismatic lens with abrasion resistant coating of 3M make as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4:1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Manager-in-charge.# — Qty: 4800 EACH
S/T/L&J R.C.C. Hume pipes (500mm Dia.) :Supplying, transporting, laying and jointing 500 mm dia non-pressure NP2 class R.C.C. Hume pipes with collars joint, including grouting the joints in cement mortar 1:2 (1 cement : 2 fine sand) with all materials, labours, tools etc complete as per the specifications and directions of MIC. (Cement shall be issued free of cost at NALCO stores).# — Qty: 200 METER
Dismantling brick work :Dismantling brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 100 metres lead with all labours, tools etc complete as per the specifications and directions of MIC.# — Qty: 100 CUM
Dismantling R.C.C. work :Dismantling R.C.C. work manually/ by mechanical means including cutting & stacking of steel bars and disposal of unserviceable material within 100 metres lead complete with all labours, tools etc complete as per specification and direction of manager in charge.# — Qty: 20 CUM
Brickwork in sub structure :Brickwork in sub structure using Cement based FLY ASH bricks in foundations, plinth, drain, steps, manholes etc. in CM 1:6 (1 cement: 6 coarse sand) including raking of joints, curing, scaffolding etc. all complete as per specifications and directions of MIC (Cement & bricks shall be issued free of cost at NALCO stores). — Qty: 1550 CUM

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L