Renovation work for UPHC One Stop Centre at Jayapuram Ward 25 in Tindivanam Municipality

Tindivanam Municipality · Tindivanam, Tamil Nadu · Civil Works & Infrastructure · open

Key facts

Tender value: ₹18.9L
EMD: ₹19K
Published: 24 Sep 2026
Closing date: 09 Oct 2026
Status: open
Ministry: MAWS

Description

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Open Tender
Make in India (MII): No
MSE preference: No

Line items (33)

Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. — Qty: 25.865 M3
Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all ﬂoors, curing, etc., complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) — Qty: 100 M2
Fabricating Supplying and ﬁxing in position of Aluminium anodised natural colour matt ﬁnish 1/3rd ﬁxed glazing 2/3rd prelaminated board of Aluminium partition of size 2.700 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after ﬁxing etc... complete complying with standard speciﬁcation and as directed by the deparmental ofﬁcers. All the aluminium sections should be anodised not less than 15 microns as ISI speciﬁcation1868/1962 / and should be gotapproved by Executive Engineer before use. — Qty: 48.864 M2
Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all ﬂoors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers. — Qty: 219 M2
Painting Old Plastered Wall Surface with Two ﬁnishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all ﬂoors etc., complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) — Qty: 585.186 M2
Supplying and ﬁxing Mild Steel grills for windows, ventilators etc.,complete complying with standard speciﬁcations and as directed by the departmental ofﬁcers. — Qty: 178.75 Kg
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved ﬁrst quality and colour of synthetic enamel paint over the existing red oxide priming coat in all ﬂoors excluding cost of priming coat etc., complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) — Qty: 7 M2
Paving the Top of roof with Solar refelective ceramic tiles of approved quality and colour laid in Cement mortar bed in 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with water resistant tile epoxy grout for joint, curing etc., complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works) — Qty: 182.997 M2
Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23 — Qty: 29 Nos
Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. SD 38 — Qty: 60 Nos
Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp SD-107 — Qty: 16 Nos
Supply and fixing of single box type 4'36 W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting SD -87 — Qty: 16 Nos
Drilling of 150 mm dia vertical bore well in hard rock area including drilling charges and including injection of casing pipe in the drilled hole etc complete (Page No:219) — Qty: 160 Rm
Supply and delivery of 160 mm dia PVC causing pipe 6KSC/CM2 including cost of pipe ea complete — Qty: 40 RM
Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete — Qty: 40 RM
Supply and delivery of Wet type Submergible including all labour charges etc., complete., Submergible Motor 15 lpmx 80m.head 1 H.P (Page No:96) — Qty: 1 Nos
Supply of 32mm UPVC Pipes specially made for deep borewell Submersible motor erection (ISI Make) including all cost materials, conveyance labours etc., complete as directed by departmental officers. — Qty: 65 RM
Cost and supply of 4Sqm cable 3 core including cost and conveyance of materials etc., complete (Page No:114) — Qty: 75 RM
Cost and supply of Nylon rope including cost and conveyance of materials etc., complete — Qty: 75 RM
Cost and supply of 32mm GI pipe inculding cost and conveyance of materials etc., complete (Page No:39) — Qty: 20 RM

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
TTPS Operation Circle CAD ACWPH Annual Overhaulinlg DG Set III Attending minor repair works, Dismantling and Cleaning of Heat exchanger, DM water tank and Replacement of Coolant — Civil Works & Infrastructure · Tamil Nadu
Road renovation work on the Fatehpur Minor from km 2.600 to km 5.400 — Civil Works & Infrastructure · Uttar Pradesh
Constuction of Community Compost Pit at Purkhu Panchayat Kot Lower A Khass Block Bhalwal — Civil Works & Infrastructure · Jammu and Kashmir · ₹36K
Facility Management Services - LumpSum Based - Anganwadi Centres — Civil Works & Infrastructure · Jharkhand · ₹25.8Cr
Upgradation of Arjun Mess consisting of following items along with installation — Civil Works & Infrastructure · Telangana
Warehousing Service - Per MT - Monthly Basis - Rehiring of Godown under modified PWS scheme at revenue district — Civil Works & Infrastructure · Jharkhand
Hiring of Third-Party Inspection Agency - Construction / Civil Engineering Works — Civil Works & Infrastructure · Assam