Renovation work
Atomic Minerals Directorate for Exploration and Research · Hyderabad, Telangana · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹12.2L
- EMD: ₹24K
- Published: 11 Nov 2026
- Closing date: 23 Nov 2026
- Status: open
- Status as of: 15 Nov 2026 01:22 UTC
- Ministry: Department of Atomic Energy
- Department: Atomic Minerals Directorate for Exploration and Research
- Office: Construction and Engineering Services Group, AMD Office Complex
Description
Replacement of existing paver blocks with outside parking tiles and kerb stones with factory-made kerb stones, replacement of Aluminium Composite Panel, and scraping and painting of walls, ceilings, doors and windows around C-block, AMD Complex, Hyderabad.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Certifications: Certificate for eligible source countries, Class I Local Supplier local content undertaking
- Documents required: Site inspection report issued by the departmental officer with seal and signature, Financial information for the last five financial years supported by balance sheets and profit and loss accounts certified by a Chartered Accountant, Banker’s solvency certificate, Details of similar works completed during the last seven years, Details of projects under execution or awarded, Performance details of works, Scanned copies of work orders for listed works, Certificate for eligible source countries, Class I Local Supplier local content undertaking, Tender acceptance letter, Certificate of net worth from a Chartered Accountant
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Item Rate
- Evaluation: L1
- Make in India (MII): Yes
- MSE preference: No
Line items (20)
- 2 — Qty: 4 5
- Excavation work of ordinary rock by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m as per specification & direction of E-I-C. — Qty: 2 Cum
- Demolishing cement concrete nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. — Qty: 16 Cum
- Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. — Qty: 310 Sqm
- Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. — Qty: 25 Sqm
- Dismantling Aluminium Composite Panel /aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge. — Qty: 34 Sqm
- Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved — Qty: 10 Cum
- Providing and laying in position 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural resources : 4 graded stone aggregate 20 mm nominal size derived from natural resources)cement concrete of specified grade excluding the cost of centering and shuttering - All work up to up to floor five levelas per specification and direction of E-I-C. — Qty: 16 Cum
- Providing and laying Outdoor parking Polished heavy duty Vitrified tiles of 600X600mm size, thickness 12mm, colour and pattern as decided by E-I-C. Tiles shall be laid over a 20 mm thick cement mortar bed (1:4) with spacer of min.3mm, maintaining proper line, level and uniform joints Joints shall be filled with epoxy grouting, and the finished surface shall be cured for at least seven days. The completed work shall be even, durable, anti-skid, free from cracks or defects, and finished to the satisfaction of the Engineer-in-Charge. — Qty: 320 Sqm
- Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). — Qty: 5 Cum
- Brick work with Cement mortar 1:4 (1 cement : 4 coarse sand) common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes. — Qty: 1 Cum
- Cement plastering 12mm thick for internal walls, ceilings, at all floors and locations with cement mortar 1:4 finished smooth over brick/concrete surfaces including hacking of concrete surfaces, raking out of brick joints, curing complete as per specifications and directions of Engineer-in-charge. — Qty: 30 Sqm
- Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. — Qty: 120 Sqm
- Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. — Qty: 120 Sqm
- Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. — Qty: 120 Sqm
- Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats. — Qty: 120 Sqm
- Painting on G.S. sheet/ MS with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : — Qty: 50 Sqm
- Varnishing with varnish of approved brand and manufacture : Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. — Qty: 20 Sqm
- Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). — Qty: 25 Kg
- Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item). Note : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site. — Qty: 35 Sqm
6 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Improvement such as widening and strengthening of Lalitgiri Museum to Kalianti Bridge via Haribhaktapur-Jerakanda road from 0/000 km to 7/575 km in the district of Kataka under State Plan — Civil Works & Infrastructure · Odisha · ₹20.6Cr
- Renovation of Dharamshala in New Yadvindra Colony, ward no. 20 at Patiala. — Civil Works & Infrastructure · Punjab · ₹42.2L
- Lining/Relining of water course of Outlet R.D 6000-R of mr. no 4 of Newada Disty Village Talwandi Malik, Khattriwala Distt. Patiala — Civil Works & Infrastructure · Punjab · ₹60.0L
- Outsourcing of Labour Part for Erection, Testing Commissioning of New 11KVLT/HTLines on Rail/PCC Poles, Distribution T/Fs, Augmentation/Sagging of ACSR of HT/LT Lines, Cables laying, Guarding, Stay Setfor Various Works — Civil Works & Infrastructure · Punjab · ₹60.0L
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Remodelling and renovation Pond Rara Sahib Chowk Somal kheri Np Maloudh — Civil Works & Infrastructure · Punjab · ₹22.3L