Renovation of Type II Quarter no 8 and 9 by providing wooden trusses Galvalume sheets roofing MDF ceiling, construction of septic tank water supply and painting etc at P R Bari under SP South, Belonia

Addl Director General of Police / Inspector General of Police (Admin) / Superintendent of Police (South) · P. R. Bari, Belonia, Tripura · Civil Works & Infrastructure · open

Key facts

Tender value: ₹8.7L
EMD: ₹17K
Published: 06 Nov 2026
Closing date: 25 Nov 2026
Status: open
Status as of: 08 Nov 2026 02:39 UTC
Department: Tripura Police
Office: Superintendent of Police (South), Tripura

Description

Renovation of Type II Quarters 8 and 9 at P.R. Bari, Belonia, including roofing, ceiling, septic tank and water-supply works, painting, and associated civil works.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (49)

Dismantling GS sheet roofing including ridges, hips,valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge. — Qty: 132 sqm
Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. — Qty: 88.59 sqm
Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. — Qty: 2 no
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :a) Of area 3 sqm and below. — Qty: 24 nos
Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge:-In cement mortar. — Qty: 0.3 cum
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: a) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) — Qty: 0.705 cum
b) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) — Qty: 0.966 cum
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (All kinds of soil ) — Qty: 13.28 cum
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. — Qty: 0.593 cum
First class brick work in foundation and plinth including cost of all materials as required complete:- (1) In cement mortar 1:4 ( 1 cement : 4 fine sand ). — Qty: 9.5 cum
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-(1) In cement mortar 1:4 ( 1 cement : 4 fine sand ). — Qty: 1.524 cum
Centering shuttering including strutting, propping etc. and removal of form work for: a) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank — Qty: 9.31 sqm
Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete above plinth level.i)Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 101 kg
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishing and reinforcement.i)1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick — Qty: 1.2 cum
Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. — Qty: 1 no
12 mm cement plaster of mix (1) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) — Qty: 70 sqm
12 mm cement plaster of mix i.n.c neat cement punnig a) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) — Qty: 45 sqm
Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance +/- 1mm) with wall thickness 2.0mm+/- 02mm. corners of the door frame to be jointed with galvanized brackets and stainless screws, joint mitred and plastic wilded. The hinge side vertical of the frames reinforced by galvanized MS tube of size 19 × 19 mm and 1 mm +/- 0.1 mm wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-Charge. a) Extruded section Profile size 48x40 mm. — Qty: 20 mtr
Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised /plastic brackets of size 75×220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserying galvanised MS tube of size 20×20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of "H" Section, a UPVC hollow section of size 100×24 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic /galvanised MS "U" cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontaly 6 mm galvanised MS rod and fastened with nuts and w — Qty: 6 sqm
Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position :i) Local Teak Wood — Qty: 0.754 cum

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L