Renovation of all the Existing Toilet and Some other miscellaneous work of Ground floor Of VVIP guest House of Kusmunda Area

South Eastern Coalfields Limited · Kusmunda, Chhattisgarh · Civil Works & Infrastructure · open

Key facts

Tender value: ₹1.3Cr
EMD: ₹1.6L
Published: 19 Oct 2026
Closing date: 04 Nov 2026
Status: open
Status as of: 22 Oct 2026 02:55 UTC
Ministry: Ministry of Coal
Office: Kusmunda Area

Description

Renovation of existing toilets and miscellaneous civil works on the ground floor of the VVIP Guest House, Kusmunda Area. The percentage-rate works tender includes painting, plastering, flooring, glazing, plumbing, sanitary fixtures, doors, ceilings and related renovation work.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (50)

2 — Qty: 3 4
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. — Qty: 7162.2071 sqm
Providing & Applying Exterior rustic textured wall paint over External surface at all level 1 Coat of exterior Acrylic primer ,1 coat of rustic texture 1.5mm to 3.00 mm prooved deoth (using 10 to 100 mesh Contaning Quartz/ Silica Aggregates ) worked to the approvd pattern, followed by 2 coat of weather-proof Exterior Premium acrylic emulsion topcaot paint including Scaffolding,staging & compliance with manufacturer of Approved brand &Etc complete as per instruction of Engineer-in-charge. New work (Two or more coats applied @ 3.28 kg r/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm & Acrylic Exterior weather coat paint' — Qty: 8781.8451 sqm
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat — Qty: 1893.1 sqm
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) — Qty: 1392 sqm
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) — Qty: 376.295 sqm
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). — Qty: 534 kg
Providing and fixing factory made uPVC glazed/ wire mesh windows/ doors comprising of lead free uPVC multi- chambered frame, sash and mullion/ coupler (wherever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (whereever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia. with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/ mechanically jointed duly sealed at all corners, including d — Qty: 205.056 sqm
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) — Qty: 984.3 sqm
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm — Qty: 775.597 sqm
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. — Qty: 310.2616 sqm
Providing and fixing soil, waste and vent pipes. 110 /100 mm dia heavy duty SWR pipe — Qty: 184 meter
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge) Granite stone of any colour and shade — Qty: 151.83 sqm
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size Size of Tile 600 x 600 mm — Qty: 470.691 sqm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm — Qty: 335.412 sqm
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. — Qty: 4269.978 sqm
Providing and fixing JPL-SSF-ST8896 Shinny 1600x230mm Shower panels 40cm Stainless steel braided hose ,thermostatic mixer diverter ,brass spout ,Hand shower with flexible hose, 2 moveable ABS body massager jet ,movable ABS Top shower hinges Accessories set nuts, bolts and gasket etc complete.with SS screws Jaguar/kolar/hindware brand complete as per instruction of Engineer -in- charge. — Qty: 8 each
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws — Qty: 46.2 sqm
Providing and fixing PVC trap of self cleansing design with C.P.grating etc. including cost of cutting and making good the walls and floors. Etc complete as per instruction of Engineer-in-charge. — Qty: 20 each
Providing & Fixing plantex Glass, ceramic,HPP unbrekable bathroom vanity Cabinet 7 Wash basin set/basin cabinet with m SLS-WHT-6801 with nut & Botle trap & Cupling Jaguar/kolar/hindware per instruction of Engineer-in-charge. — Qty: 12 each

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
imp. Sarvice lane With Nali from Juhi lal colony in Block No 315/4 Block No 317 in ward 84 Zone 3 — Civil Works & Infrastructure · ₹8.3L
GENERAL REPAIR WORK AT JOINT DIRECTOR SECONDARY EDUCATION OFFICE UDAIPUR — Civil Works & Infrastructure · Rajasthan · ₹15.0L
4 NARSAR KARAHIYA SAMPARK MARG SE JUNIOR HIGH SCHOOL TAK PITCH MARG KA LEPAN ANURAKSHAN (SAMANYA MARAMMAT) KARYA.(HOT MIX) — Civil Works & Infrastructure · Uttar Pradesh · ₹15.3L
Laying RMC M40 in various streets of transport nagar ward no. 30 — Civil Works & Infrastructure · Punjab · ₹1.8Cr
Estimate For Laying 315mm Dia UPVC U/G Pipe Line For Outlet RD 13350/R of Shahpurkandi Channel No.3 For Year 2026-27 — Civil Works & Infrastructure · Punjab · ₹51.7L
In Ward-30 Govind Vihar II, work of drain and interlocking tiles from Harendra house to Omendra house and Pravesh house, Sundar house — Civil Works & Infrastructure · ₹19.1L
purani nagar panchayat ke sthan par shoping complex cum office dukan no 05 — Civil Works & Infrastructure · Madhya Pradesh · ₹8.0L