RENOVATION OF ACCOUNTS BRANCH AND ADMINISTRATIVE BRANCH MOH BUILDING, 30 BAYS BUILDING, SECTOR 17, CHANDIGARH.

Municipal Corporation · Chandigarh, Chandigarh · Civil Works & Infrastructure · open

Key facts

Tender value: ₹80.1L
EMD: ₹1.6L
Published: 03 Nov 2026
Closing date: 10 Nov 2026
Status: open
Status as of: 04 Nov 2026 06:47 UTC
Department: Engineering-MCC
Office: Road Division - I

Description

Renovation of the Accounts Branch and Administrative Branch at the MOH Building, 30 Bays Building, Sector 17, Chandigarh. The works include dismantling, civil and interior finishes, partitions, furniture, aluminium and glazing work, and electrical work.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (76)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead :Of area 3 sq. metres and below — Qty: 44 Each
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: — Qty: 478.836 Kg
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm. (DSR 15.23.1) — Qty: 230.754 Sqm
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. — Qty: 150.736 Sqm
Disposal moorum/building rubbish/malba/similar unservicable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved muncipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Enginner -in- charge. — Qty: 1.32 Cum
Dismantling wooden /aluminium /gypsum partitions doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. — Qty: 244.308 Sqm
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: ( 1 Cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size).DSR 4.1.10 — Qty: 17.58 Cum
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. — Qty: 57.09 Sqm
Providing and fixing of lay-grid false ceiling 15 mm thick densified tegular edged eco friendly light weight calcium silicate consisting of ceilling tiles Armstrong/Anutone or equivalent as per approved sample of size 2' x 2' lay-in-modular grid/ suspension system ( hot dipped galvanized steel) of standard T-Section having its flanges face powder coaed colour white suspended from ceiling and secured with clips and G.I. etc with following details.(a) Main runners shall be T-Shaped section with single rotary stitching of size 24mm x 36 mm and 3600mm long (b) Cross runners shall be T-Shaped double rotary stitching of size 24mm x 26mm and 1200mm long.Cross runner T-Section of 24mm x 26mm and 600mm long. The frame work comprises of main gunners spaced at 1200mm centre to centre shall be securely fixes to the structural soffits by approved hangers at 1200mm maximum centres. The hangers (G.I. wire of 4mm dia) to be fixed by means of roof plug, level adjuster and screws etc. Flush fittiing 120 — Qty: 171.27 Sqm
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work b — Qty: 188.439 Sqm
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier ,wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of Size. Size of Tile 600 x 1200 mm — Qty: 30.585 Sqm
Glazed Vitrified tiles Matt/Antiskid finish of size (Size of Tile 600 x 600mm) — Qty: 200.169 Sqm
Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) Conforming to IS: 15477, in average 3mm thickness. — Qty: 230.754 Sqm
PLASTER 12 mm thick cement plaster 1:4 — Qty: 150.736 Sqm
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. — Qty: 216.49 Sqm
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/liltre of approved brand and manufacture, including applying additional coates whereever required to achieve even shade and colour. Two coats. (DSR 13.83.2) — Qty: 216.49 Sqm
Providing and fixing wooden paneling with 9mm waterproof ply greenlam make on existing M.S. frame /wooden on both side fixed (i.e. horizontal and vertical ) in brick wall with the help of rawl plug/gutties and screws nails complete in all respect to the entire satisfaction of Engineer-in-Charge. — Qty: 336.588 Sqm
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick. — Qty: 336.588 Sqm
Supply and fixing of Greenguard certified pentagonal modular workstation of approved make such as Herman Miller / Bristol / Godrej Interio / Steelcase or equivalent, of size 1500 mm (W1) × 1500 mm (W2) × 600 mm (D) × 750 mm (H) with partition height 1190 mm, made of factory-finished modular panel system having panel thickness 65 ± 1.5 mm with 69 mm trim width, complete with powder-coated CRCA steel framework, aluminum trims, fabric/metal tiles, concealed cable management system, 25 mm thick pre-laminated particle board worktop and side panels with PVC edge banding, all necessary hardware, fittings and accessories. — Qty: 17 Each
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion: Polyester powder coated aluminium (minimum thickness ofpolyester powder coating 50 micron) DSR 21.1.1.3 — Qty: 413.88 Kg

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L