Renovation and maintenance of Gymnasium hall at NSRCC, Agartala_SH_ Gypsum board, plastering, wood work, Rain water pipes, sanitary fittings, bamboo flooring and walling and other allied works during the year 2026_27

PWD (R&B), Government of Tripura · Agartala, Tripura · Civil Works & Infrastructure · open

Key facts

Tender value: ₹80.5L
EMD: ₹1.6L
Published: 29 Oct 2026
Closing date: 10 Nov 2026
Status: open
Status as of: 01 Nov 2026 14:42 UTC
Department: Public Works Department (Roads and Buildings), Government of Tripura
Office: Agartala Division No. III, Second Circle

Description

Renovation and maintenance of the Gymnasium hall at NSRCC, Agartala, including gypsum board, plastering, wood work, rain water pipes, sanitary fittings, bamboo flooring and walling, and allied works during 2026-27.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (79)

2 — Qty: 3 4
Without dewatering:- Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. — Qty: 3 Cum
Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200. i) sand filling — Qty: 3 Cum
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. — Qty: 63 Sqm.
Clearing jungle including uprooting of rank vegetation, grass, brushwood, treesandsaplingsofgirthupto30cm measured at a height of 1mabove ground level and removal of rubbishuptoadistanceof 50moutside the periphery of the area cleared — Qty: 225 Sqm.
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering (a) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) — Qty: 12.5 Cum
Providing concrete for plain concrete (using jhama brick aggregate) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement) P.C.C M10 i ) Nominal mix 1:3:6 (hand mixing) — Qty: 5.5 Cum
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) — Qty: 3.5 Cum
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more — Qty: 350 Kg.
Centering shuttering including struttings, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply — Qty: 26.5 Sqm.
First class brick work in super structure above plinth level & upto floor-five level including cost of all materials as required complete : In cement mortar 1:4 ( 1 cement : 4 fine sand ). — Qty: 3.5 Cum
Half brickmasonryworkwith first class bricks in superstructureuptofloor five level includingcostof all materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ). — Qty: 27.5 Sqm.
12 mm cement plaster of mix : Cement mortar 1:6 (1 cement : 6 fine sand) — Qty: 250 Sqm.
15mm cement plaster on the rough side of single or half brick wall of mix: Cement mortar 1:6 (1 cement : 6 fine sand) — Qty: 155 Sqm.
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers' specification and direction of Engineer-In-Charge. — Qty: 123.75 Mtr.
Providing and fixing to existing door frames. 30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 110mm width out of which 90mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 110mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 130mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. fra — Qty: 45.36 Sqm.
Finishing walls with acrylic smooth exterior paint of required shade of approved brand and anufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. — Qty: 450 Sqm.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Local Teak Wood — Qty: 19.742 Cum
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. — Qty: 45.36 Sqm.
Painting with synthetic enamel paint ( one or more coats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge. — Qty: 255 Sqm

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L