Renewal of SH-48 from Ch 161.60 to Ch 170.00 Kumuta-Kadamadagi road (Selected reaches) in Honnali Taluk, Davanagere District

National Highways · Honnali, Karnataka · Civil Works & Infrastructure · open

Key facts

Tender value: ₹4.9Cr
EMD: ₹7.3L
Published: 03 Nov 2026
Closing date: 17 Nov 2026
Status: open
Status as of: 08 Nov 2026 22:36 UTC
Ministry: Ministry of Road Transport and Highways
Department: Karnataka Public Works Department
Office: Office of the Executive Engineer, National Highway Division, Chitradurga

Description

Renewal work on selected reaches of SH-48 between Ch 161.60 and Ch 170.00 on the Kumuta-Kadamadagi road in Honnali Taluk, Davanagere District. The estimated contract value is Rs. 485.77 lakh excluding GST, with a completion period of 6 months.

Eligibility & requirements

Past performance: 50%
Startup relaxation: No
MSE relaxation: No
Certifications: UDIN-generated turnover certificate
Documents required: Tenderer registration as a KPWD Civil registered Contractor, Turnover certificate with UDIN generated through ICAI Portal, Chartered Accountant confirmation letter with UDIN generated through ICAI Portal, Work Done Certificate bearing Work Indent Number issued by an officer not below the rank of Executive Engineer, Liquid assets and/or credit facility certificate from a Nationalized bank, Earnest Money Deposit Bank Guarantee or FDR, Machinery ownership, lease or hire documentation as applicable

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Evaluation: Two-cover evaluation: technical qualification followed by financial bid evaluation
Make in India (MII): No
MSE preference: No

Line items (23)

2 — Qty: 4 5
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned including removal and disposal of top organic soil not exceeding 150 mm in thickness including all labour, usage charges of all machinery, loading, unloading, transportation etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. by Mechanical Means:- — Qty: 1.481 Ha
Scarifying the existing bituminous surface to a depth and disposal of scarified material within all lifts and including all labour, load, unload, usage charges of all machinery etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. By mechanical means using Hydraulic excavator. — Qty: 3850 Sqm
Excavation in Soil using Hydraulic Excavator and Tippers with Disposal Excavation for roadwork in soil by hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location, with all lifts and including all labour, load, unload, usage charges of all machinery etc., complete. with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. — Qty: 1386 Cum
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. Grading-II Material (close graded) as per job mix. — Qty: 396 Cum
Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work as per job mix. — Qty: 990 Cum
Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per table-500-3, including cost of all materials, labour, usage charges of all machinery, lead, lift, loading & unloading etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. — Qty: 3850 Sqm
Providing and applying tack coat with bitumen emulsion(RS1) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. — Qty: 3850 Sqm
Providing and applying tack coat with VG-10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. — Qty: 29837.5 Sqm
Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. 50-75 mm compacted thickness as per job mix. — Qty: 1766.63 Cum
Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 5.4 per cent of mix and filler at 2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. 30-40 mm compacted thickness as per j — Qty: 1010.63 Cum
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. — Qty: 902.4 Cum
Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25-1967, fixed in position including finishing and lettering including painting, including printing letters, including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. — Qty: 50 Each
Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811, including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. — Qty: 240 Metre
Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment including all lead, lifts, all labour, load, unload, usage charges of all machinery etc., complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. — Qty: 5640 Metre
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffic control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc.,complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. — Qty: 1352 Sqm
Providing and laying of hot applied thermoplastic compound 10 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 10 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffic control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. — Qty: 126 Sqm
Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5mm MS Angle mounted on two nos.of mild steel circular pipe 65 NB 3.2 mm thickness and 4.5 meter total height, firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing, finishing neatly, including supplying to site of work, curing concrete work, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. — Qty: 27.6 Sqm
Project Display board of size 1.80 x 1.60 and 2.8 M from ground level : Providing and erecting Project Display Board of size 1.80 vertical x 1.60 M Horizontal made of Cold Rolled coil sheet 16 guage (1.60mm thickness) sheeting sthrenghtened by welding to MS angle of size 35x35x5mm iron frame work on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frame works, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6mm 2 Nos firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.80 M from ground level as per approved drawing (Including cost of lettering) including cost of all mate — Qty: 2 Each
A(ii) 90 cm equilateral triangle. — Qty: 22 Each

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L