Providing Concertina Coil and Barbed Wire Fencing from Subway to Kattangal along Calicut-Mukkam Road
National Institute of Technology Calicut · Calicut, Kerala · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹3.5L
- EMD: ₹7K
- Published: 13 Oct 2026
- Closing date: 17 Nov 2026
- Status: open
- Status as of: 10 Nov 2026 01:41 UTC
- Department: Engineering Unit 1
- Office: Engineering Unit 1 - NIT Calicut
Description
Works tender for providing concertina coil and barbed wire fencing along Calicut-Mukkam Road, including cement concrete, formwork, concertina fencing and fabricated Y-arms.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Item Rate
- Make in India (MII): No
- MSE preference: No
Line items (4)
- 1:2:4 (1 Cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 1.44 cum
- Columns, piers, abutments, pillars, posts and struts — Qty: 28.8 sqm
- Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) — Qty: 450 metre
- Providing and fixing factory made intermediate Y-arms at 2.50 m c/c and straining Y-arms at first post, every 16th post, last end post and corner post, consisting of MS angle 50×50×5 mm as per IS 2062, each arm of length 510 mm angled at 120° having 3 nos. of slots of 6 mm width at an angle of 45° and 12 mm diameter hole at the end of slot at a depth of 25 mm. The Y-arms shall be coated with one coat of primer and two coats of epoxy paint of specified colour. — Qty: 1046.52 kg
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Improvement such as widening and strengthening of Lalitgiri Museum to Kalianti Bridge via Haribhaktapur-Jerakanda road from 0/000 km to 7/575 km in the district of Kataka under State Plan — Civil Works & Infrastructure · Odisha · ₹20.6Cr
- Renovation of Dharamshala in New Yadvindra Colony, ward no. 20 at Patiala. — Civil Works & Infrastructure · Punjab · ₹42.2L
- Lining/Relining of water course of Outlet R.D 6000-R of mr. no 4 of Newada Disty Village Talwandi Malik, Khattriwala Distt. Patiala — Civil Works & Infrastructure · Punjab · ₹60.0L
- Outsourcing of Labour Part for Erection, Testing Commissioning of New 11KVLT/HTLines on Rail/PCC Poles, Distribution T/Fs, Augmentation/Sagging of ACSR of HT/LT Lines, Cables laying, Guarding, Stay Setfor Various Works — Civil Works & Infrastructure · Punjab · ₹60.0L
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Remodelling and renovation Pond Rara Sahib Chowk Somal kheri Np Maloudh — Civil Works & Infrastructure · Punjab · ₹22.3L