Providing and laying lotus Fountain in Gapsagar Lake.

Municipal Council Dungarpur · Dungarpur, Rajasthan · Civil Works & Infrastructure · open

Key facts

Tender value: ₹26.4L
EMD: ₹53K
Published: 13 Oct 2026
Closing date: 24 Oct 2026
Status: open
Status as of: 21 Oct 2026 01:10 UTC
Department: Department of Local Bodies
Office: Office of the Municipal Council Dungarpur (Raj.)

Description

Providing and laying a lotus-shaped fountain in Gapsagar Lake, including buoyancy assemblies, lotus structure, pumps, lighting, control equipment, cabling and associated installation work.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (18)

The buoyancy assembly platform of round shape minimum 8' feet dia at which the water jet system unit shall be placed. It should be made of non corrosive material and round shape have capacity to make the whole unit float in the lake. Made up by f reinforeced plastic work. The float should be made by Gelcoat, Surface Matt, And 2 layers of matt. The whole buoyancy assembly, sides should be Glossy and finished. The Supporting Accessories inside the floater Should be of SS 304. All the fixtures and Fitting on and Inside floater Should be of SS304. The Floater Should be Light in weight but the WCC of floatter should be Min. 400 Kgs floater height should be minimum 12" in height and at down side of assembly centre hole should be there for flench and motor Attachement. — Qty: 2 pcs
Fixing of Lotus shape leaves in 3 step petal of lotus attached with ss structure all three step should have gap in between to set lights between leave petals, it which should look like orignal lotus and should be fixed on buoyancy assembly unit with complete ss structure for attachement. lotus Should not be less than 6 feet in dia. platform of lotus shape at which centre jet unit shall be placed. It should be made of non corrosive material. Made up by work. f reinforeced plastic The lotus should be made by Gelcoat, Surface Matt, And 2 layers of Fibreglass matt. The whole leaves of lotus should be Glossy and finished. — Qty: 2 pcs
Supply And Fixing Joint system All Parts of Round Uncurler Should be made with Bottom Flench System to fited on the top of Booster and top Flench System for Nozzle. The work of Uncurler is attach floater and motor together and make it a single unit and to give strength to whole unit in water and during running of water — Qty: 2 pcs
Poly Eurethene Foam Insulation work in 8 feet dia Floater with mixing of two different chemicals to form Foam, which is hard and provide strength to the hollow Floater. The PUF will be light in weight but provide strength after hardening. — Qty: 2 set
providing and fixing SS Supporting and legs Means all the SS Heavy-duty tubular welded Stainless Steel frame design adds strength and longevity to fix all Pumps, Buster, Accessories, Luminaries etc. Legs will supports whole unit. The structure must setup in such a way that it can be used as the safety legs for whole fountain body to protect all installed fountain equipments under water when ever lake comes down — Qty: 2 pcs
Providing and fixing round ring outside the lotus and between the lotus to give ligthing system for the lotus leaves, outer ring litghs will give focus on lotus live and it will be seen from far aslo. all ligths will be installed on ouside ring and between the buoyancy assembly — Qty: 2 pcs
Providing and fixing round water ring with nozzels in it and connection with centre setup between the lotus from which water will flow between the lotus leaves from side of the buoyancy assembly — Qty: 2 pcs
Heavy duty sky jet Emitter made of brass with provision for laminar flow of air over the exterior of nozzle to reduce turbulence and induce proper height of jet. Maximum height of water effect is 30 mts. Emitter should be Made up of Brass with required strength. The central Emitter allow to fountain water to a particular height. The pressure at which water is being pumped and hole of Emitter is deciding factor of the height — Qty: 2 pcs
High Beam RGB LED 36 watt 12 volt Luminaries water proof lights. All external nuts, bolts and studs shall be rust proof. wiring shall be 4 core round insulated PVC flexible with copper conductors not less than 1.5 sqmm. Waterproof luminaries shall be water proof when fully immersed in water. All in pool connection shall be fully waterproof — Qty: 8 pcs
High Beam RGB LED 9 watt 12 volt Luminaries water proof lights. All external nuts, bolts and studs shall be rust proof. wiring shall be 4 core round insulated PVC flexible with copper conductors not less than 1.5 sqmm. Waterproof luminaries shall be water proof when fully immersed in water. All in pool connection shall be fully waterproof — Qty: 34 pcs
P/F anchor system with steel cables,clamps and eye lugs for casting in anchor blocks. — Qty: 2 pcs
Control voltage driver Supply and fixing of control voltage driver (CVD) for LED lights (12 volt) as required. — Qty: 2 pcs
LED LIGHT RPT Designing, supply commissioning and testing to supply proper voltage and signals to all RGB lights. — Qty: 2 pcs
LED LIGHT CONTROLLERDesigning, supply erection, commissioning and testing of colour changing system — Qty: 2 pcs
Mono submersible vertical pumpset of 20 HP 380-440v 50 cycles supply with foundation bolts and 3 core PVC flexible copper conductor double insulated cable up topanel Box. (Max 100 Fit.) — Qty: 2 pcs
Supply & Installation Heavy Duty Stainless Steel water filter for pumpset. — Qty: 2 pcs
Supply & Installation weather proof control panel made of CRC sheet with proper gears like motor Starter, air contractor, Kit kat, connectors, MCB and all required approved make components for pump and SMPS, control box and all required fittings for RGB Led Lights. — Qty: 2 pcs
Necessary and Fixing cable work up to 250 meter (6 Sq.mm 3 core flat & 2.5 Sq.mm 4 core flat) — Qty: 2 pcs

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
imp. Sarvice lane With Nali from Juhi lal colony in Block No 315/4 Block No 317 in ward 84 Zone 3 — Civil Works & Infrastructure · ₹8.3L
GENERAL REPAIR WORK AT JOINT DIRECTOR SECONDARY EDUCATION OFFICE UDAIPUR — Civil Works & Infrastructure · Rajasthan · ₹15.0L
4 NARSAR KARAHIYA SAMPARK MARG SE JUNIOR HIGH SCHOOL TAK PITCH MARG KA LEPAN ANURAKSHAN (SAMANYA MARAMMAT) KARYA.(HOT MIX) — Civil Works & Infrastructure · Uttar Pradesh · ₹15.3L
Laying RMC M40 in various streets of transport nagar ward no. 30 — Civil Works & Infrastructure · Punjab · ₹1.8Cr
Estimate For Laying 315mm Dia UPVC U/G Pipe Line For Outlet RD 13350/R of Shahpurkandi Channel No.3 For Year 2026-27 — Civil Works & Infrastructure · Punjab · ₹51.7L
In Ward-30 Govind Vihar II, work of drain and interlocking tiles from Harendra house to Omendra house and Pravesh house, Sundar house — Civil Works & Infrastructure · ₹19.1L
purani nagar panchayat ke sthan par shoping complex cum office dukan no 05 — Civil Works & Infrastructure · Madhya Pradesh · ₹8.0L