Providing and Installation of High Mast Flag at MCD park in Palam Vidhan Sabha AC-37 under SWR-II, New Delhi During 2026-27 (SH: Civil and Electrical Works)
Public Works Department, Government of NCT of Delhi · New Delhi, Delhi · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹28.6L
- EMD: ₹57K
- Published: 10 Nov 2026
- Closing date: 20 Nov 2026
- Status: open
- Status as of: 16 Nov 2026 03:34 UTC
- Department: Public Works Department
- Office: South West Road Division-2, M-141(N)
Description
Composite civil and electrical works to provide and install a 35-meter high mast flag at MCD park in Palam Vidhan Sabha AC-37, New Delhi. The work includes civil foundation and associated works, supply of the mast, foundation bolts, Indian National Flags and flag-raising/lowering equipment, and installation, testing and commissioning. Estimated cost is Rs. 28,61,526; completion period is 2 months.
Eligibility & requirements
- Past performance: 80%
- Startup relaxation: No
- MSE relaxation: No
- Certifications: Chartered Accountant certificate with Unique Document Identification Number (UDIN)
- Documents required: Work experience certificates certified by an officer not below the rank of Executive Engineer, Project Manager or equivalent, Average annual financial turnover certificate from a Chartered Accountant with UDIN, Audited balance sheets and profit/loss statements certified by a Chartered Accountant, Banker's certificate from a commercial bank or net worth certificate from a Chartered Accountant with UDIN, as applicable, Bidding capacity calculation in Form C-3, for non-CPWD contractors, Receipt of deposition of earnest money deposit, List of technical and administrative employees
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage Rate Tender
- Evaluation: Percentage rate
- Make in India (MII): No
- MSE preference: No
Line items (57)
- Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. 1.1) All kinds of soil — Qty: 108 cum
- Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lif. — Qty: 38 cum
- Extra for every additional lif of 1.5 m or part thereof in excavation / banking excavated or stacked materials. 3.1) All kinds of soil — Qty: 39 cum
- Foundations, footings, bases for columns — Qty: 20 sqm
- Columns, piers, abutments, pillars, posts and struts — Qty: 15 sqm
- Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 5.1) Concrete of M10 grade with minimum cement — Qty: 15 cum
- Extra for shuttering in circular work (20% of respective centering and shuttering items) — Qty: 14 Sqm
- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 7.1) Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 1600 kg
- Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 8.1) All works upto plint — Qty: 16 cum
- Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 9.1) Cement mortar 1:4(1 cement :4 coarse sand) — Qty: 12 cum
- 30 mm thick White sand stone — Qty: 10 sqm
- 30 mm thick Red sand stone — Qty: 4 sqm
- Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). — Qty: 250 kg
- Red sand stone — Qty: 11 sqm
- White sand stone — Qty: 22 sqm
- Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. — Qty: 43 mtr
- Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 14.1) Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) — Qty: 50 Cum
- Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. — Qty: 3 sqm
- Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 16.1) 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. — Qty: 80 sqm
- Supply of tall polygon Flag Mast at individual site. Flag mast shaft shall be in equal sections, hot dip galvanised and section designed suitably for wind velocity as per IS 875 and approved by engineer in charge. (Indicative minimum parameters shall be as per technical data sheet). The shaft shall be PU painted with a coating of etch primer, primer and PU paint. 17.1) 35 meter height in 4 equal sections. — Qty: 1 nos.
2 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Improvement such as widening and strengthening of Lalitgiri Museum to Kalianti Bridge via Haribhaktapur-Jerakanda road from 0/000 km to 7/575 km in the district of Kataka under State Plan — Civil Works & Infrastructure · Odisha · ₹20.6Cr
- Renovation of Dharamshala in New Yadvindra Colony, ward no. 20 at Patiala. — Civil Works & Infrastructure · Punjab · ₹42.2L
- Lining/Relining of water course of Outlet R.D 6000-R of mr. no 4 of Newada Disty Village Talwandi Malik, Khattriwala Distt. Patiala — Civil Works & Infrastructure · Punjab · ₹60.0L
- Outsourcing of Labour Part for Erection, Testing Commissioning of New 11KVLT/HTLines on Rail/PCC Poles, Distribution T/Fs, Augmentation/Sagging of ACSR of HT/LT Lines, Cables laying, Guarding, Stay Setfor Various Works — Civil Works & Infrastructure · Punjab · ₹60.0L
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Remodelling and renovation Pond Rara Sahib Chowk Somal kheri Np Maloudh — Civil Works & Infrastructure · Punjab · ₹22.3L