Providing and Fixing Aluminium windows in Type V and allied area in RCF Colony Chembur Mumbai-400074

Rashtriya Chemicals and Fertilizers Ltd. · Chembur, Mumbai, Maharashtra · Civil Works & Infrastructure · open

Key facts

Tender value: ₹56.5L
EMD: ₹1.5L
Published: 07 Oct 2026
Closing date: 28 Oct 2026
Status: open
Status as of: 18 Oct 2026 22:34 UTC
Department: IT
Office: RCFLTD, MCF

Description

Works tender for providing and fixing aluminium windows and associated civil, glazing, masonry, finishing, and related works in Type V and allied areas at RCF Colony, Chembur, Mumbai. The BOQ contains 44 schedule items. Estimated value is INR 5,647,675 and EMD is INR 150,000.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage BoQ
Make in India (MII): No
MSE preference: No

Line items (44)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 and above in superstructure above plinth level upto floor five level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) — Qty: 15 Cu.M
Providing and laying in position plain cement concrete of specified grade with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing surface, curing and including the cost of centering and shuttering at all level : Nominal Mix of 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) — Qty: 1 Cu.M
Providing and laying in position plain cement concrete of specified grade with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing surface, curing and including the cost of centering and shuttering at all level : Nominal Mix of 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) — Qty: 1 Cu.M
Providing waterproofing treatment through specialized agencies asper their specifications to the flooring of water closets, bathrooms, kitchen, nahanies, washing places, sanitary blocks etc. by giving INJECTIONS with cement solution with water proofing compound into the floor slab so as to make it consistent, homogeneous and impervious against leakage, seepage etc. The sunk portion shall then be covered with brickbat waterproof coba in 1:5 c.s. of required thickness with necessary gradient for easy flow of water. Finally the floor shall be covered with joint less waterproof cement plaster in 1:3 c.s. 12 mm to 15 mm thick finished rough for receiving tiles. The average thickness of complete treatment shall not be less than 100 mm. The soil pan area will not be deducted. ( After completion of work leakage test shall be carried out after impounding the water for 7 days without any extra cost. The actual treated area will be measured and paid for). — Qty: 10 Sq.M.
Providing and applying avg 12 mm thk single coat cement sand plaster in cement mortar of mix in ratio of 1:3 (1 cement : 3 fine sand), smooth or as required to receive specified finish or to receive tiles/marble over to correct line, plumb and level to internal faces of walls/ ceilings including providing & fixing in position 150 mm wide 20 gauge GI chicken mesh at junctions of concrete and masonry work and if required apply chemical adhesive to concrete surfaces and scratch coat, necessary scaffolding with all lifts and leads, hacking, watering, curing, etc complete as directed by Engineer In Charge. NOTE: Only river sand shall be used for internal plastering work. — Qty: 125 Sq.M
Removing existing door or windows with frame and shutters and making good etc. to the existing surface. — Qty: 150 Nos
Providing and applying 20 mm thick external sand faced cement plaster upto any height and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding, etc complete as directed By Engineer In Charge — Qty: 75 Sq.M
Providing and applying Plaster of Paris punning for avg thickness of 12mm to walls, beams, ceilings, columns in perfect line and level over the base of single coat cement plaster including roughening of existing surface making 6 mm groove at skirting and door, window jamb, sill, lintel, etc. complete or as directed Engineer In-charge/Architect. The rate is exclusive of base coat cement plaster. — Qty: 60 Sq.M
Providing and applying one or more coats of approved primer and two/three coats of acrylic plastic emulsion paint of an approved make and colour as per manufacturers specifications to any surface, at all height and locations as directed including scrapping the wall, applying 2/3 coats of putti, including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge./Architect. — Qty: 30 Sq.M
Providing and applying first single coat of approved primer and two coats of anti-algal, anti-fungal, exterior paint as specified below of an approved make and colour as per manufacturers specifications to any surface, upto any height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, watering, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge. By using acrylic based exterior paint. — Qty: 60 Sq.M.
Providing and applying two coats of acrylic distemper (Asian Tractor Uno Acrylic Distemper/ Berger Bison Acrylic Distemper/ ICI Acrylic Distemper) of any colour as per manufacturers specifications to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting with broom and filling cracks or small patches with wall putty (Asian Acrylic wall Putty/ Dulux Interior Wall Putty A500/ Equivalent material in cost and properties) if necessary by any approved means, etc. complete as directed by Engineer-in-charge. — Qty: 50 Sq.M.
Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint/lustre of an approved make and colour as per manufacturers specifications to all surfaces, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in- charge. )for plastered wall/ wood work/ steel work) — Qty: 15 Sq.M.
Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for sill and jambs for window/door frames etc. including round nosing/chamfering if required as directed by Engineer In-charge/Architect including preparing the surface and levelling in the desired line, cement mortar 1:3 bedding or backing, cement float, machine cutting, leveling, jointing, smooth cement plastering along the sides to match the existing surface in cement mortar 1:3, filling the joints with neat cement or pigment mixed with cement, finishing, curing etc complete as directed by Engineer In Charge.: 18mm thk. Ruby red, jet black, sparkle black, Hasan green Granite in double patti,width of each patti shall be minimum 150 mm. or as directed by Engineer In-charge/Architect. — Qty: 500 M
Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for sill and jambs for window/door frames etc. including round nosing/chamfering if required as directed by Engineer In-charge/Architect including preparing the surface and levelling in the desired line, cement mortar 1:3 bedding or backing, cement float, machine cutting, leveling, jointing, smooth cement plastering along the sides to match the existing surface in cement mortar 1:3, filling the joints with neat cement or pigment mixed with cement, finishing, curing etc complete as directed by Engineer In Charge.: 18mm thk. green marble in double patti, width of each patti shall be minimum 150 mm. or as directed by Engineer In-charge/Architect. — Qty: 50 M
Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for sill and jambs for window/door frames etc. including round nosing/chamfering if required as directed by Engineer In-charge/Architect including preparing the surface and levelling in the desired line, cement mortar 1:3 bedding or backing, cement float, machine cutting, leveling, jointing, smooth cement plastering along the sides to match the existing surface in cement mortar 1:3, filling the joints with neat cement or pigment mixed with cement, finishing, curing etc complete as directed by Engineer In Charge.: 25 to 30mm thk. Kadappa stone in double patti, width of each patti shall be minimum 150 mm. or as directed by Engineer In-charge/Architect. — Qty: 50 M
Providing and fixing in position two track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 61.85 mm x 45.5 mm x 1.3 mm thk (wt 1.055 kg/Rm) for bottom, 61.85 mm x 31.75 mm x 1.3 mm thk. (wt 0.659 kg/Rm) for top & sides, mounted on anodized aluminum rectangular frame of size 63mm x 38mm x 2.0mm(1.054). The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26,7 mm x 1.10 mm thk. (Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water — Qty: 50 Sq.M.
P& F In position Three Track Alumimium Window of extruded Modular & anodized aluminium section of approved make & size 93mm x 45.5 mm x 1.5mm thk (1.659 kg/Rm) for bottom and 92mm x 31.75 mm x 1.3 mm thk.( wt.0.933 Kg/Rm) For top and sides mounted on anodized aluminium rectangular Frame of size 100mmX 40MMX1.3mm (wt.0.976 Kg/Rm) The shutter comprising of bearing bottom and Top of size 40mmX18mmX1.25mm thk.(wt.0.417 Kg/Rm) interlocking section of size 40mmX26.7mmX1.10mm thk.(wt.0.469 Kg/Rm) & hand sides of 40mmX18mmX1.25mm thk.(wt.0.41 Kg/Rm) with 5mm thick plain/frosted/tinted glass fixed in shutter including approved quality neoprene gasket,fixture,fastening and accessories like pvc rollers,pvc weep holes, locks, handles etc,complete as directed by Engineer In Charge.(Note: anodic Film must not be less than 15 microns i.e AC15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hours) — Qty: 100 Sq.M.
Providing and fixing in position four track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 122.2 mm x 45.5 mm x 1.3 mm thk (wt 1.829 kg/Rm) for bottom and 122.2 mm x 31.75 mm x 1.2 mm thk. (wt 1.093 kg/Rm) for top and sides mounted on anodized aluminum rectangular frame of size 127mm x 25.4mm x 1.3mm(1.052 kg/m) The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26.7 mm x 1.10 mm thk. (Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directedby Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anod — Qty: 100 Sq.M
Providing and fixing Stainless Steel Netting 26 B.W.G., 5 to 6 Squares per sq. cm. including beading etc. complete. — Qty: 60 Sq.M
Providing and laying 600 x 600 x 8 to 10 mm thk. vitrified tiles as specified below conforming to I.S.15622-2006 with water absorbtion less than 0.08% for flooring of an approved, quality, make and pattern /design for flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, cutting, leveling, jointing, filling the joints by neat cement slurry or approved colour grout, curing, finishing etc complete as directed by Engineer In Charge.:Light/Dark glazed, antiskid/matt tiles — Qty: 50 Sq.M

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
imp. Sarvice lane With Nali from Juhi lal colony in Block No 315/4 Block No 317 in ward 84 Zone 3 — Civil Works & Infrastructure · ₹8.3L
GENERAL REPAIR WORK AT JOINT DIRECTOR SECONDARY EDUCATION OFFICE UDAIPUR — Civil Works & Infrastructure · Rajasthan · ₹15.0L
4 NARSAR KARAHIYA SAMPARK MARG SE JUNIOR HIGH SCHOOL TAK PITCH MARG KA LEPAN ANURAKSHAN (SAMANYA MARAMMAT) KARYA.(HOT MIX) — Civil Works & Infrastructure · Uttar Pradesh · ₹15.3L
Laying RMC M40 in various streets of transport nagar ward no. 30 — Civil Works & Infrastructure · Punjab · ₹1.8Cr
Estimate For Laying 315mm Dia UPVC U/G Pipe Line For Outlet RD 13350/R of Shahpurkandi Channel No.3 For Year 2026-27 — Civil Works & Infrastructure · Punjab · ₹51.7L
In Ward-30 Govind Vihar II, work of drain and interlocking tiles from Harendra house to Omendra house and Pravesh house, Sundar house — Civil Works & Infrastructure · ₹19.1L
purani nagar panchayat ke sthan par shoping complex cum office dukan no 05 — Civil Works & Infrastructure · Madhya Pradesh · ₹8.0L