PROVIDING AMC OF 02 NOS. OF 500 KVA DG SETS INSTALLED IN M.C. BUILDING, SECTOR-17, CHANDIGARH FOR THE YEAR 2026-2027
Municipal Corporation · Chandigarh, Chandigarh · Repair, Maintenance & AMC Services · open
Key facts
- Tender value: ₹3.7L
- EMD: ₹7K
- Published: 10 Nov 2026
- Closing date: 16 Nov 2026
- Status: open
- Status as of: 11 Nov 2026 05:58 UTC
- Department: Engineering-MCC
- Office: Electrical Division, New Deluxe Building, Sector-17, Chandigarh
Description
Annual maintenance contract for two 500 kVA DG sets at the Municipal Corporation building in Sector-17, Chandigarh, including routine servicing, parts replacement, coolant and filter supply, electrical component installation, and emergency engineering visits. The BOQ estimated total is Rs. 374,274.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (16)
- Routine servicing & maintenance of 01 no. AMF Control Panel and 1 no. 500 kVA D.G set installed in MC Building Sec-17 Chandigarh. The DG set shall have to be tested twice a month or whenever required by the qualified and experienced staff. The job includes the cost of testing, cleaning, checking of battery water, oil filters, battery leads, tempertaure gauge, air filters, engine oil, fuel filter, coolant, greasing of minor partsand other minor repair for proper functioning of the DG sets including the cost of all petty material required to complete the job to the entire satisfaction of Engineer in charge. The other major components will be paid extra as required at site on actual work done basis. — Qty: 2 Nos.
- Service of 500 kVA DG set including changing of following parts. The job includes the cost of the following parts and othe petty material to complete the same like O-rings, Gaskets, Cleaning of Filter, Housing by scratching, Cleaning with diesel oil etc. to complete the job to the entire satisfaction of Engineer-in-charge. a) Element Oil by Pass filter- 02 No. b) Separator Fuel Filter- 01 No. c) Element Lub. Oil Filter-02 No. d) Element CRN Resistor- 01 No. e) Valvoline/Castrol/ IOCL Oil-55 Ltr f) Battery Water-20 Litre — Qty: 2 Job
- Supply and Installation of Radiwash Coolant (10 Litre) in 500 kVA Gen set. The work shall be excuted to the entire satisfaction of Engineer in charge. — Qty: 2 Can
- Supply/Installation of air filter set inner outer for 500 KVA DG set — Qty: 2 Nos.
- Emergency visit of qualified engineer to check HT Panel/Transformer in case of any fault / tripping which includes Repair, Setting and testing of PLC system and main LT/HT panel of MC Building, Sec-17. The job includes fault finding, removing of fault, setting of system and testing the same for proper running of DG sets , auto and manual mode. — Qty: 4 Job
- Supply and Installation of 5 KVAR heavy duty capacitor 440V, 50Hz, cylindrical type. — Qty: 1 Nos.
- Battery copper leads 35mmsq with terminal, thimbles. — Qty: 2 Nos.
- S/I/T/C of 12V 180AH exide make battery — Qty: 2 Nos.
- S/I/T/C of Battery Charger 24V/10Amp — Qty: 1 Nos.
- S/I/T/C of Capacitor duty Contactor MOC 20AMP alongwith labour cost. The job include dismantling the old burnt out contactor including the burnt out wiring. The job is to be done to the entire satisfaction of Engineer-in-charge. — Qty: 2 Nos.
- S/I/T/C of Capacitor duty Contactor MOC 25AMP alongwith labour cost. The job include dismantling the old burnt out contactor including the burnt out wiring. The job is to be done to the entire satisfaction of Engineer-in-charge. — Qty: 2 Nos.
- S/I/T/C of Capacitor duty Contactor MOC 12.5AMP alongwith labour cost. The job include dismantling the old burnt out contactor including the burnt out wiring. . The job is to be done to the entire satisfaction of Engineer-in-charge. — Qty: 2 Nos.
- Supply and Installation of 25 KVAR heavy duty capacitor 440V, 50Hz, cylindrical type. The job is to be done to the entire satisfaction of Engineer-in-charge. — Qty: 1 Nos.
- Supply and making Outdoor type end termination cable joint using heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 core 185 sq.mm cable, jointing compound and silica gel. The job includes labour charges, maggering of cable, fault detection and checking of relays in HT panel Cable size is 3 core 185sqmm. — Qty: 1 Nos.
- Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole — Qty: 10 Nos.
- Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A — Qty: 6 Nos.
1 tender document(s) available — sign up to download.
Related tenders
- KANDRI/ENGG/PUR/2026-27/ 1909 — Repair, Maintenance & AMC Services · Maharashtra · ₹1.4L
- AMC of Cooling Equipments of NPM — Repair, Maintenance & AMC Services · Odisha · ₹6.5L
- Repair and Maintenance Jobs in Unloading and Screening Area of RMHP — Repair, Maintenance & AMC Services · Odisha · ₹53.2L
- Service Engineering Visit for Maintenance of Van Mounted Cable Fault Locator — Repair, Maintenance & AMC Services · Odisha · ₹2.7L
- Emergency Visit for ABB Drives and Automation System — Repair, Maintenance & AMC Services · Odisha · ₹58.4L
- Cylinder Maintenance and Handling Service — Repair, Maintenance & AMC Services · Gujarat · ₹3.1Cr
- THREE YEAR ARC FOR SUPERVISION OF OVERHAULING/SERVICING OF M/S INSTRUMENTATION LIMITED (IL) VALVES AT BPCL KOCHI REFINERY — Repair, Maintenance & AMC Services · Kerala
- THREE YEAR ARC FOR SUPERVISION OF OVERHAULING/SERVICING OF M/S SAMSON VALVES & POSITIONERS, BPCL KOCHI REFINERY — Repair, Maintenance & AMC Services · Kerala