Providing 120 KVA UPS and replacement of main LT panels for main building at IISc.
Indian Institute of Science · Bangalore, Karnataka · Electrical Equipment & Supplies · open
Key facts
- Tender value: ₹1.2Cr
- EMD: ₹1.7L
- Published: 16 Oct 2026
- Closing date: 16 Nov 2026
- Status: open
- Status as of: 13 Nov 2026 01:17 UTC
- Department: Centre for Campus Management and Development
- Office: Office of the Project Engineer cum Estate Officer
Description
Works tender for supplying, installing, testing and commissioning a 120 KVA online UPS and replacing the main LT panels at the Indian Institute of Science, Bangalore. Estimated value is Rs. 1,15,88,594 including GST; completion period is 5 months. EMD of Rs. 1,73,829 is required.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Documents required: Earnest Money Deposit proof and scanned demand draft, Qualification information and documents required under the eligibility criteria, Undertaking that the bidder is not ineligible for corrupt and fraudulent practices, MSE registration certificate, if claiming MSE status, Hard copies of documents and credentials uploaded with the technical bid
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Two bids (Technical and Financial)
- Evaluation: Lowest evaluated Tender Price
- Make in India (MII): No
- MSE preference: Yes
Line items (105)
- Supply, Installation, Testing and Commissioning of TTA compartmentalised, cubicle panel, fabricated out of 2mm thick sheet steel, free standing totally enclosed, dust and vermin proof, suitable for 3PH 415 Volts, with incoming and outgoings, meters, connections, interconnections with suitable size cables, complete with terminating arrangements with lugs, painting, earthing etc, with cable chamber, bus bar chamber etc. Cable Termination for feeders shall be as specified in Single Line Diagram. Wherever Metering other than Indicating Lamps is specified the cost of metering shall include 3 nos wire wound,Cast Resin CTs of Cl 1.0, 15 VA of feeder rating A / 1 or 5 A even if not specified. All ACBs shall have RYB LED,ON/Off,Trip LED Indicating Lamps. All Outgoing MCCBs above 100 A rating shall have Micro Processor based variable overload and Short Circuit Protection, Spreaders and Terminal Shrouds,Rotary Handles. Below 100A MCCB can be with Fixed Thermal overload and magnetic shortcircuit s — Qty: 1 LOT
- 120kVA UPS Supplying, installation, Testing & Commissioning of of following capacity at full load (Unity Power Factor) at operating temperature 0 to 40 deg C, Relative humidity 0 to 95%, Online double conversion true sine wave UPS as follows, 1) 120KVA/KW UPS with 2nos of 60KW safe swappable Power Module with MODBUS card for BMS connectivity. 2) 10mtrs DC cable between UPS and Battery breaker, Interlinks between battery, Battery breaker with enclosure and Battery Rack.warranty: 1year for UPS 3) External 120kVA K4 Al Isolation transformer at UPS input 4) 60mins backup on 120KVA @0.8pf, 1.75ECV, Ageing factor and design margin is unity. 150AH SMF VRLA Batteries - 96nos/UPS or min. 1,72,800 VAH. Warranty: 2years for VRLA Batteries 5)Factory Acceptance Test (PLEASE REFER TENDER DOCUMENT FOR FULL DESCERIPTION OF BOQ items) — Qty: 1 Each
- Fabricating supplying and mounting MS box made out 14SWG suitablefor floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 tanks treatment with powder coated paint and finally finished with approved colour etc., complete. — Qty: 130000 Sqcm
- Supplying and fixing Moulded Case Circuit Breaker(MCCB)over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Shortcircuit with adjustable thermal magnetic release,Microprocessor release shall have Earth Fault as per IS/IEC60947-2.(Icu=100%lcs). In 4P MCCB, all Poles should have protection for Short-Circuit/OverLoad. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB.MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open).Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 250 A 36kA, 4P — Qty: 6 Each
- Supply and fixing of Rotary handle for MCCB — Qty: 6 Each
- Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. with necessay wiring. — Qty: 18 Each
- Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6 mm M.S.flat framework in existing panel board.The busbar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 250 A 4 x 30 x 10 mm Aluminium Strips — Qty: 10 Meter
- Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or wiring with specified IS-694:confirming to latest amendments including terminations with copper lugs and ferrules. 1.5 mm2 — Qty: 150 Meter
- Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or wiring with specified IS-694:confirming to latest amendments including terminations with copper lugs and ferrules. 2.5 mm2 — Qty: 100 Meter
- Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or wiring with specified IS-694:confirming to latest amendments including terminations with copper lugs and ferrules. 4.0 mm2 — Qty: 100 Meter
- Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or wiring with specified IS-694:confirming to latest amendments including terminations with copper lugs and ferrules. 6.0 mm2 — Qty: 200 Meter
- Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or wiring with specified IS-694:confirming to latest amendments including terminations with copper lugs and ferrules. 10.0 mm2 — Qty: 100 Meter
- Supplying heavy gauge PVC Conduit Pipe dia2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19 mm dia 2 mm thick — Qty: 80 Meter
- Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps SP — Qty: 30 Nos
- Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40A DP — Qty: 10 Nos
- Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN — Qty: 2 Nos
- Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 100 x 50 x 6 mm C channel — Qty: 6 Meter
- Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm — Qty: 100 Meter
- Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 75 x 6 mm — Qty: 120 Meter
- Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 120 Sqmm, 3.5 Core, (23 GI Strips - 4 x 0.8 mm) — Qty: 600 Meter
3 tender document(s) available — sign up to download.
Related tenders
- SUPPLY OF V.F TRANSFORMER OF RATIO 470:600 OHMS (CYLINDER TYPE) — Electrical Equipment & Supplies · Madhya Pradesh
- Handheld Rechargeable Pocket Torch — Electrical Equipment & Supplies · Madhya Pradesh
- Providing and Installing a New Electromagnetic Flow Meter with telemetery at Bhatera Pump House under Balaghat Mine Water Supply Scheme. — Electrical Equipment & Supplies · Madhya Pradesh · ₹1.7L
- Standing Fan and Other items — Electrical Equipment & Supplies · Arunachal Pradesh
- Supply of Fan Belt Generator, Multiwire 10mm, Electrical Boards, Electric Lighter, Multimeter and Rechargeable Bulb — Electrical Equipment & Supplies · Arunachal Pradesh · ₹1.4L
- UPGRADATION OF POWER SUPPLY SYSTEM OF RADAR FWCS IN 14 CORPS ZONE — Electrical Equipment & Supplies · Ladakh
- Lead Acid Storage Batteries For Motor Vehicles with Light Weight and High Cranking Performance (V2) Conforming to IS 14257 — Electrical Equipment & Supplies · Jammu and Kashmir · ₹30.1L
- AIR PURIFICATION MACHINE — Electrical Equipment & Supplies · Delhi