Providing 11 kV Indoor Substation for 26 Nos. chargers for 128 nos. E-Buses under PM E-Bus Sewa Scheme in CTU Workshop Depot-III, Sector-25 Chandigarh
Chandigarh Administration · Chandigarh, Chandigarh · Electrical Equipment & Supplies · open
Key facts
- Tender value: ₹3.5Cr
- EMD: ₹7.0L
- Published: 22 Oct 2026
- Closing date: 17 Nov 2026
- Status: open
- Status as of: 11 Nov 2026 06:02 UTC
- Department: Engineering, Electrical Circle, Electrical Division No. 3
- Office: Electrical Division No. 3, U.T. Chandigarh
Description
Providing an 11 kV indoor substation for chargers serving 128 E-buses at CTU Workshop Depot-III, Sector-25, Chandigarh. The work includes busbar trunking, earthing, transformers, HT and LT panels, cables, metering, and fire-safety equipment.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (24)
- 3200 A, Isc= 50kA for 1 sec — Qty: 80 P.mtr.
- DSR item No. 5.6: Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. — Qty: 10 Each
- DSR item No. 5.8:Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) — Qty: 320 P.mtr.
- 120 sq. mm — Qty: 8 Each
- 400 sq. mm — Qty: 4 Each
- 2000 KVA — Qty: 4 Each
- DSR item No. 2.22 Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. — Qty: 12 Each
- 11KV, 800 Amp, 26.3KA/3Sec. incoming VCB Panel with Copper Busbar complete as per above specifications. — Qty: 2 Each
- 11KV, 800Amp, 26.3KA/3Sec. outgoing VCB Panel with Copper Busbar complete as per above specifications. — Qty: 5 Each
- Main LT Panel Supplying, installation, testing and commissioning of modular, sectionalized Low Voltage (LV) Panel of Form–4B construction, suitable for 415 V, 3 Phase, 4 Wire, 50 Hz AC supply system, conforming to IEC 61439-1 and IEC 61439-2, as a Totally Type Tested Assembly/ Design Verified Assembly, fabricated in a compartmentalized design AS PER COMPLETE ITEM NO.9 OF DNIT. — Qty: 4 Each
- Size 400 sq.mm 3 core — Qty: 50 P.mtr.
- Size 120 sq.mm 3 core — Qty: 150 P.mtr.
- S/E of 4 nos. sand buckets of 10 ltr. Capacity each made out of 24 Gauge G.I sheet. The buckets with sand shall be hanged on Suitable size of angle iron stand fabricated out of 1 ¼ x 1 ¼ x1/8” angle iron having hooks for hanging the buckets in two rows. The job includes the cost of painting with two coats of red paint of superior quality after one coat of primer on buckets and stands to complete the job up to the entire satisfaction of the Engineer–in–charge. — Qty: 4 Each
- Supply of Erection of medium-size first aid box made of 16-gauge MS sheet of size 14”x7”x5” with 6 wound dressings, 3 burn dressings, 13 gms absorbent cotton wool, one dressing scissors, one bottle of spirit of sal volatile, 1 tube of burn ointment (Burnol) tablets of aspiring, 1 No. artificial respirator. — Qty: 2 Each
- Supply and Erection of shock treatment chart written in Hindi and English and local language duly framed in wood frame with glass complete as required as per India Electricity Act. (Safety rules). — Qty: 5 Each
- CO2 type of 9 Kg capacity fire extinguishers conforming to IS. — Qty: 16 Each
- S/E rubber mat of size 6’x3’x 12 mm thick (ISI mark) Wide of superior quality and of approved make as approved by the Engineer –in- Charger /EC to be laid on floor in HT room in Front of panels and transformers. — Qty: 20 Each
- Supply and erection of Angle iron frame of the size 50mm x 50mm x 6mm at the top of the trench. The job includes the cost of welding of angle iron frame and other petty material required to complete the job to the entire satisfaction of Engineer-in-charge. — Qty: 786 P.R.ft.
- S/E of M.S. Chequred plate 5mm thick to cover the loose cables trench. The M.S. Chequred plate shall be 2’ width, so as to cover the all trench as per reqd. at site of work. The job includes cost of carriage and fixing the cover plate with suitable arrangement on the existing 50mm x 50mm x 6mm angle iron already fixed on the trench. The cost includes the welding of M.S strips (tee) 40mm x 40mm x 6mm with Chequred plate on both sides to bring the Chequred plate in the same level of angle iron frame on the top of trench. The job includes the cost of 2 coats of approved paint after one coat of primer or other petty material reqd. to complete the job as per satisfaction of Engineer-in-Charge at site. — Qty: 786 P.sq.ft.
- S/I/T/C of Power Pack with 220 Volt AC supply input and 24 Volt DC continuous output, suitable for closing/tripping/ indication of HT VCB breakers, provided with 2 Nos. 12 Volt each, SMF batteries of 100 AH capacity, Charging unit and suitable capacity of multifunction meter for current and voltage including connection with 2.5 Sq.mm FRLS insulated copper conductor cable etc. duly houses in cabinet of size (L x W x D) 36”x24”18” made of 14 gauge CRCE sheet having 4 Nos. legs of 8” length made of MS angle of size 50 x 50 x 6mm. The complete cabinet inner and outer side is powder coated of approved shade. The cabinet should have openable door on front side with locking arrangement complete be suitable for boost mode and trickle mode with display of input and output voltage and current and provided with suitable rating Miniature circuit breaker for protection at input supply and output of the battery charger. — Qty: 2 Each
1 tender document(s) available — sign up to download.
Related tenders
- SUPPLY OF V.F TRANSFORMER OF RATIO 470:600 OHMS (CYLINDER TYPE) — Electrical Equipment & Supplies · Madhya Pradesh
- Handheld Rechargeable Pocket Torch — Electrical Equipment & Supplies · Madhya Pradesh
- Providing and Installing a New Electromagnetic Flow Meter with telemetery at Bhatera Pump House under Balaghat Mine Water Supply Scheme. — Electrical Equipment & Supplies · Madhya Pradesh · ₹1.7L
- Standing Fan and Other items — Electrical Equipment & Supplies · Arunachal Pradesh
- Supply of Fan Belt Generator, Multiwire 10mm, Electrical Boards, Electric Lighter, Multimeter and Rechargeable Bulb — Electrical Equipment & Supplies · Arunachal Pradesh · ₹1.4L
- UPGRADATION OF POWER SUPPLY SYSTEM OF RADAR FWCS IN 14 CORPS ZONE — Electrical Equipment & Supplies · Ladakh
- Lead Acid Storage Batteries For Motor Vehicles with Light Weight and High Cranking Performance (V2) Conforming to IS 14257 — Electrical Equipment & Supplies · Jammu and Kashmir · ₹30.1L
- AIR PURIFICATION MACHINE — Electrical Equipment & Supplies · Delhi