NW-Development of New Industrial Area at Kanjhawala, Delhi. SH-Construction of Balance Boundary wall, Installation of Information / Caution Board, Provision of Security Gate, Prefabricated Guard Room etc. and other misc. works at Kanjhawala Industrial Area

DSIIDC · Kanjhawala, Delhi · Civil Works & Infrastructure · open

Key facts

Tender value: ₹21.7Cr
EMD: ₹31.7L
Published: 31 Oct 2026
Closing date: 21 Nov 2026
Status: open
Status as of: 09 Nov 2026 05:06 UTC
Ministry: Government of NCT of Delhi
Department: Delhi State Industrial & Infrastructure Development Corporation Ltd.
Office: Office of the Executive Engineer CD-23

Description

Construction of the balance boundary wall, installation of information/caution boards, provision of a security gate and prefabricated guard rooms, and miscellaneous works at Kanjhawala Industrial Area. Estimated cost is Rs. 217,132,806 and the completion period is 9 months.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Documents required: RTGS/payment proof towards EMD, Registration/enlistment certificate, Work experience certificates, GST registration certificate, ESIC registration certificate, EPFO registration certificate, Undertaking of Labour Welfare Board and labour licence, if applicable, Notarized affidavit confirming GST returns have been filed and no GST dues are pending up to the last financial year, Acknowledgement of the latest GST return filed, PAN card, Notarized affidavit confirming eligible similar works were not executed through another contractor on a back-to-back basis, List of works in hand/in progress with notarized affidavit, Signed integrity agreement and integrity pact, notarized, Proof of satisfactorily completed similar works; private-sector work to be supported by TDS certificates

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage rate
Evaluation: Financial bid opened for technically eligible bidders; lowest tendered rate
Make in India (MII): No
MSE preference: No

Line items (31)

Earth work in excavation by mechanical means Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and Disposal of excavated earth leadupto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge — Qty: 8036.028 Cum
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. — Qty: 4119.538 Cum
Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m.All kinds of soil — Qty: 20 Nos.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 Cement: 5 coarse sand (zone-III) : 10 graded stone aggregate 20 mm nominal size). — Qty: 618.156 Cum
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 6.48 Cum
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5 mm nominal size derived from natural sources) — Qty: 1228.7865 Sqm
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. — Qty: 1228.7865 Sqm
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources) — Qty: 3486.74 Cum
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 973.2625 Cum
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. — Qty: 8628.18 Sqm
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers — Qty: 10763.2 Sqm
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts — Qty: 5383 Sqm
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 513854.249 Kg
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level.. Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 300700.1375 Kg
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) — Qty: 3071.23 Cum
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Note: Old Serviceable Bricks recovered from site will be supplied free of Cost) — Qty: 1 Cum
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) — Qty: 1761.409 Cum
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works — Qty: 40737.8 Kg
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) — Qty: 14350 Sqm
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) — Qty: 14350 Sqm

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L