NIe-T- 96/2026-27(Sl-16)

North Bengal Development Department · Cooch Behar, West Bengal · Civil Works & Infrastructure · open

Key facts

Tender value: ₹45.5L
EMD: ₹91K
Published: 06 Nov 2026
Closing date: 20 Nov 2026
Status: open
Status as of: 12 Nov 2026 04:03 UTC
Department: North Bengal Development Department
Office: Executive Engineer, NBDD

Description

Repairing work of a 750.00 m long and 3.00 m wide bituminous road from near West Khaterbari Sangrami Sangha Club to near Sultan Hossain house under Hazrahat-II Gram Panchayat, Mathabhanga-I Block, Cooch Behar district.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Make in India (MII): No
MSE preference: No

Line items (16)

By Mix in Place Method Construction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieveat least 98%of themaximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 desired density, complete as per clause 401 ii) Rate per cum for grading-II Material — Qty: 171.5602 CUM
Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniformthickness, hand packing, rollingwith3wheeledsteel/ vibratory roller 8-10 tonnes in stages topropergradeandcamber,applying and brooming requisite type of screening/bindingMaterials tofillup the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404). By Manual Means Grading-2 (Table 400-9) (ii)(b) Using Screening (Table 400-10) Type-B (11.2 mm aggregate) — Qty: 177.19 CUM
Prime Coat Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming toIS:8887 on prepared porous granular surface including clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502).i)On WMM/WBM surface @ 0.70-1.0kg/sqm. — Qty: 2362.5 SQM
Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complyingwith IS:8887using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).ii)On Granular surface treated with primer @ 0.25kg-0.30 /sqm. — Qty: 2362.5 SQM
Bituminous Macadam Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504).ii)for Grading 2 (19 mm nominal size) — Qty: 118.1289078 CUM
Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complyingwith IS:8887using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).i)On bituminous surface @ 0.20kg-0.3kg /sqm. — Qty: 2362.5 SQM
Open - Graded Premix Surfacing Providing, laying and rolling of open-gradedpremix surfacingof 20mmthicknesscomposedof13.2 mmto 5.6mmaggregates either using viscosity grade bitumen of approved grade to required line,gradeandlevel toserveaswearingcourse on a previously prepared base, includingmixinginasuitable plant, laying and rolling with a smoothwheeled tandemor other approved type roller 8-10 tonne capacity, finishedtorequiredlevel andgrade (ReferencetoMORT&H's specification clause 510) 10.(1) Case-I:Mechanicalmethodusing approvedgradeBitumenandHMP of appropriate capacity not less than 75 tonnes/hour . — Qty: 2362.5 SQM
Seal Coat (Type B) Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511). 12(ii)Case - II : Type B providing and laying of premixs and seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. — Qty: 2362.5 SQM
Supplying fitting and fixing R.C. guard post 1.37m long with C.C. 1:2:4 with graded stone chips of 13.2mm down casting , curing complete including cost of providing 4nos.of 12mm dia. rod of length 1.54m as main reinforcement and 6 nos. of round shaped 8mm dia rods used as binders; the placing of the first binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245mm c/c ; the guard post is of octagonal section with inscribed circle of dia 24cm at the base tapering to corresponding dimensions of 16cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white/tannery yellow and black to 90 cm length standing up above ground after mendinggood damages if any during striking off shuttering, making hole in ground of 47cm depth and 30cm. minimum dia, fixing the guard posts in the same holes and repacking the earth properly so as to keep the — Qty: 50 Each
Retro-Reflectorised Traffic Signs: Providing and fixing of retro reflectorised cautionary,mandatory and informatory sign as per IRC:67madeof high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when sign swith maximum side dimensions do not exceed 600mm, o rwith aluminium sheeting 2.0 mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mildsteel angle iron post75mmx 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete45cmx45cmx60cm,60cm below ground level as per approved drawing (Reference to MORT&H's specification 801). — Qty: 2 Each
Retro-Reflectorised Traffic Signs: Providing and fixing of retro reflectorised cautionary,mandatory and informatory sign as per IRC:67madeof high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when sign swith maximum side dimensions do not exceed 600mm, o rwith aluminium sheeting 2.0 mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mildsteel angle iron post75mmx 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete45cmx45cmx60cm,60cm below ground level as per approved drawing (Reference to MORT&H's specification 801). 4(ii) 60 cm equilateral triangle — Qty: 2 Each
Direction and Place Identification Signs with size more than0.9 sqm size Board. Providing and erecting direction and place identification retro reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm supported on a mildsteel angle iron post 75mmx75mmx6mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M15grade cement concrete 45cmx 45cmx60cm, 60cm below ground level as per approved drawing (Reference to MORT&H's specification 801). — Qty: 2.2 SQM
Road Distance Indicator Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printingetc(ReferencetoMORT&H's specification 805). 14(ii)Ordinary kilometer stone (precast) — Qty: 2 Each
Retro-Reflectorised Traffic Signs: . Providing and fixing of retro reflectorised cautionary,mandatory and informatory sign as per IRC:67madeof high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when sign swith maximum side dimensions do not exceed 600mm, o rwith aluminium sheeting 2.0 mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mildsteel angle iron post75mmx 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm,60cm below ground level as per approved drawing (Reference to MORT&H's specification 801). 4(v) 60 cm x 45 cm rectangular — Qty: 2 Each
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area,thickness of 2.5mmis exclusiveof surface applied glass beads as per IRC:35 .The finished surface to be level,uniformandfreefromstreaks and holes (Reference toMORT&H's specification 803). — Qty: 150 SQM
Road Delineators :- Supplying and installation of delineators (road way indicators, hazardmarkers,objectmarkers),80 100 cm high above ground level, painted black and white in 15 cm widestrips, fitted with 80x100mm rectangular or 75mmdia circular reflectorised panels at the top,buried or pressed into the ground and conforming to IRC-79 and the drawings (Reference to MORT&H's specification 806). — Qty: 10 Each

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Improvement such as widening and strengthening of Lalitgiri Museum to Kalianti Bridge via Haribhaktapur-Jerakanda road from 0/000 km to 7/575 km in the district of Kataka under State Plan — Civil Works & Infrastructure · Odisha · ₹20.6Cr
Renovation of Dharamshala in New Yadvindra Colony, ward no. 20 at Patiala. — Civil Works & Infrastructure · Punjab · ₹42.2L
Lining/Relining of water course of Outlet R.D 6000-R of mr. no 4 of Newada Disty Village Talwandi Malik, Khattriwala Distt. Patiala — Civil Works & Infrastructure · Punjab · ₹60.0L
Outsourcing of Labour Part for Erection, Testing Commissioning of New 11KVLT/HTLines on Rail/PCC Poles, Distribution T/Fs, Augmentation/Sagging of ACSR of HT/LT Lines, Cables laying, Guarding, Stay Setfor Various Works — Civil Works & Infrastructure · Punjab · ₹60.0L
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Remodelling and renovation Pond Rara Sahib Chowk Somal kheri Np Maloudh — Civil Works & Infrastructure · Punjab · ₹22.3L