Modernization/Upgradation of Existing Parks/Green Belts
Delhi Development Authority · Rohini, Delhi · Electrical Equipment & Supplies · open
Key facts
- Tender value: ₹23.7L
- EMD: ₹47K
- Published: 07 Nov 2026
- Closing date: 16 Nov 2026
- Status: open
- Status as of: 12 Nov 2026 10:32 UTC
- Department: Electrical Division No.-12, Delhi Development Authority
- Office: Executive Engineer (E), Electrical Division No.-12, Paschim Vihar, New Delhi
Description
Percentage-rate works tender for supply, installation, testing and commissioning of 4 m GI poles with 45-watt LED street lights, accessories and panel at NHP-6, Sector-24, Rohini (HD-5). Estimated cost is Rs. 23,71,634; completion period is 3 months.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Certifications: Valid Electrical Contractor License, GST registration
- Documents required: Unique Transaction Reference (UTR) of EMD deposited through IFMIS Portal, Valid DDA enlistment certificate in the appropriate category, Proof of payment of e-tendering processing fee charges in CRB of DDA, GST registration certificate and acknowledgement of up-to-date filed return, if required, and tax clearance certificate, Undertaking on minimum Rs.50 non-judicial stamp paper that bidder has not been blacklisted by any Government organization or PSU, Tender Acceptance Letter on agency letterhead, Valid Electrical Contractor License, Valid EPFO and ESIC registration certificates, or undertaking if not applicable, Mandatory undertaking on affidavit regarding compliance with labour laws, minimum wages, RTGS wage transfers, EPF and ESI, Corrigendum(s) uploaded before the last date of bid submission, if any, Affidavit/certificate from CA mentioning financial turnover of last 3 years or the period specified in the bid documents
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage Rate
- Evaluation: Percentage-rate tender; technical eligibility evaluation followed by financial bid evaluation
- Make in India (MII): No
- MSE preference: No
Line items (20)
- 2 — Qty: 4 5
- Supplying, Fabrication and Installation of 4 mtr. high Pole made out of 65 mm dia. NB, B-class GI Pipe ISI marked duly welded with MS Base Plate of size 300 mm x 300 mm x 12 mm thick with stiffener of size 130 mm x 60 mm x 5 mm thick; top edge to be blunted (No sharp edge), suitable Earth Stud on Base Plate, making suitable size hole in pole at a height of 2.5 meter from base plate for cable entry/exit, painting & numbering of pole, making suitable size hole in base plate for cable entry/exit into the pole and fixing the pole on the existing foundation with the existing nuts-bolts, washers etc. complete as required. — Qty: 52 Each
- Supplying and Fixing of Single Over Hang (SOH) Bracket- for 50-80 dia. MS/GI Pole made of MS Pipe with 300 mm long MS Tube of suitable diameter for Light Fitting accommodation, connection etc. complete as required. — Qty: 38 Each
- Supplying and Fixing of Double Over Hang (DOH) Bracket- for 50-80 dia. MS/GI Pole made of MS Pipe with 300 mm long MS Tube of suitable diameter for Light Fitting accommodation (Angle as per EIC/AE direction). — Qty: 10 Each
- Providing and Laying in Position, 1:2:4 (1 Cement : 2 Coarse sand : 4 Graded Stone Aggregate) Reinforced Cement Concrete Foundation of size 450 mm x 450 mm x 1200 mm deep (900 mm below Ground Level and 300 mm above Ground Level) including excavation of earth, refilling, providing, cutting, bending and placing in position, Reinforcement of Cold Twisted Bars of 12 mm dia.- 1200 mm long (approx.)- 8 Nos. and Reinforcement Ring of Cold Twisted Bar of 8 mm dia.- 1400 mm long (approx.)- 6 Nos. (with suitable spacing) including centering & shuttering as required with Providing, Fixing and Positioning of One Set of Foundation Bolts comprising of 4 Nos., 16 mm dia. 750 mm long J-Type MS bolts (Threaded portion shall be galvanized) along with 3 Nos. GI nuts and 2 Nos. GI washers etc. per bolt and 1 No. anchor plate (3 mm thick) of suitable size and providing 63 mm (OD) DWC pipe ISI marked for cable entry & exit and foundation should be finished with neat cement punning technique on the exposed p — Qty: 52 Job
- Supplying, installation, testing and commissioning of 45 watt post top latern (for gate light), with aluminium canopy i/c supply and fixing of suitable mounting accessories ( Like Bracket/Nut bolts etc.) & suitable size wiremesh complete as required. — Qty: 4 Each
- Supplying, Installation, Testing & Commissioning of Street Light LED Fixture Powder Coated Pressure Die Cast Aluminum body with driver as per the requirement with Driver Efficiency>85%, Input voltage: 140-270 Volt AC, Frequency 50/60 Hz, Operating Temp range-5°C to 50°C, Internal Surge Protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency>85%, THD<10% as per IEC 61000-3-2 , PF≥0.95, IP- 66, IK-10, CRI>70, Under Voltage and Over Voltage Protection, EMI-EMC As per CISPR 15, Lenses for Beam Angle as per IESNA type I/II/III as per the width of the road and the project requirement, suitable to fit in up to 65 mm dia. pipe, life time (LED, Driver & Electrical Circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/4000°K/5700°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching)<5, Maximum Power Consumption should not more than the specified rating and Fixture shall be of — Qty: 58 Each
- Supply and Installation of Pole Connector Box made out of Glass Reinforced Polyester Sheet Moulding Compound Conforming to IS:13410-1992 Grade-S1 of Outside Dimensions 280 mm (H) x 170 mm (W) x 115 mm (D) (all the corners of the box should be round & not pointed ones) suitable to mount on 40/50/65/80 mm dia. GI Pole with the following Provisions/Accessories Mounting in Box etc. complete as required. a) 2 Nos. Clamps made out of 19 mm x 3 mm MS Strip of suitable Length for Mounting Box on the Pole. b) Water Tight Front Cover with 2 Nos. Stainless Steel Hinges & 1 No. Screw for Tightening. c) 4-Way, 220 V, 30 A, Dough Moulded Connector with SMC with Stainless Steel Inserts- 1 No. d) 16 A, Moulded SMC Rewireable Kit-Kat- 1 No. e) Suitable size Hole at suitable Location on Rear Wall for Cable & Wire Entry in the Connector Box. f) Earthing Bolt M6 x 20 mm. g) Neutral Link- 1 No. — Qty: 52 Each
- Supplying of following sizes of XLPE (Cross Linked Poly Ethylene) Insulated PVC Sheathed Alumimium Conductor Armoured Power Cable of 1.1 KV grade including connection, testing etc. as required. 2C x 16 sq. mm — Qty: 1700 Meter
- 4C x 25 sq. mm — Qty: 600 Meter
- Providing and Fixing 6 SWG dia. GI wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub-main wiring/cable as required. — Qty: 1200 Meter
- Supplying and Laying of following size DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS: 14930, Part-II complete with fitting and cutting, jointing etc. direct-in-ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia. (OD-63 mm & ID-51 mm nominal) — Qty: 1750 Meter
- Laying of one number PVC Insulated and PVC Sheathed/XLPE Power Cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. Up to 35 sq. mm — Qty: 2300 Meter
- Supplying and drawing of following sizes FRLS PVC Insulated Copper Conductor, Single Core Cable in the existing surface/recess steel/PVC conduit as required. 3C x 1.5 sq.mm — Qty: 182 Meter
- Supplying, installation, testing and commissioning of floor mounted LT feeder pillar cubical type double door of size 1000 mm x 900mm x 300 mm deep duly compartmentalized and with general arrangement made out of 2mm thick CRCA sheet having hinged gasket cover and screwed knobs with double locking arrangement and rain protection covers 100 mm and supported with MS angle iron legs and bottom frame of size 35mm x 35mm x 5mm x 1mtr. long grouted with 1:3:6 CC foundation and should be 0.7 mtr. above ground level. Legs should be covered with brick walls,duly 1:4 cement plaster, connections, inter connections with suitable size of FRLS PVC insulated copper conductor using thimbles,ferrules wherever required, painting, numbering including supply and fixing of following accessories complete etc. as required (as per drawing approved by Engineer-in-charge). (a)100 Amps.30KA Four Pole MCB ('C'-Series), ----1 No. (b)16 Amps. SP MCB ('C'-Series), 10 kA------ 6Nos (c)6A-32 A DP MCB ('C'-Series),10KA — Qty: 2 Each
- Supplying and Replacement of floor mounted LT Feeder Pillar cubical type of size 1000 (H) mm x 900 mm (W) x 400 mm (D) (for meter installaion) made out of 2 mm thick MS CRCA Sheet having hinged gasket covers and screwed knobs with locking arrangement & Locking Hooks and separate Rain Protection Cover with extension of 100 mm , supported with MS Angle Iron legs and bottom frame of size 35 mm x 35 mm x 5 mm x 1 mtr. long grouted with 1:3:6 CC foundation and should be 0.7 mtr. above ground level. Legs should be covered with brick walls, duly 1:4 cement plaster, Painting with Primer, Numbering including Supply & Fixing of following accessories etc. complete as required (as per drawing approved by Engineer-in-Charge). a) Bakelite sheet of suitable size for meter installtion b) Lifting hook on the top of feeder pillar- 1 Set. — Qty: 1 Set
- Supplying, Fabrication and Installation of Wire Mesh Protection Frame for Existing Feeder Pillar, constructed from 8 SWG MS wire mesh with a Nominal size of 75 mm x 25 mm Rectangle. The Frame dimensions are 1.5 mtr. (Width) x 1.00 mtr. (Depth) x 2.00 mtr. (Height). It includes a Base Frame made of 40 mm x 40 mm x 6 mm MS Angle Iron, MS Strip Supports of 40 mm x 6 mm, and 0.5-meter-long leg supports of the same Angle Iron, all as per the approved drawing. Additionally, provide a suitably sized door, Supply and Fix a godown lock with locking arrangement, painting, and grouting with 1:2:4 Cement Concrete Foundation, as approved by the Engineer-in-Charge, complete as required. — Qty: 3 Each
- Earthing with GI Earth Pipe 4.5 meter long, 40 mm dia. including accessories, and Providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. — Qty: 9 Set
- Providing& laying of DWC HDPE pipe of size 63 mm outer dia, by trenchless technology with no dig method by making bore hole in horizontal direction across the road/path with boring equipment i/c jointing / cleaning of pipes, excavation of pits of required size & depth etc. complete as required. — Qty: 40 Meter
- Providing and Fixing 25 mm x 5 mm GI Strip on surface or in recess for connection etc. as required. — Qty: 18 Meter
3 tender document(s) available — sign up to download.
Related tenders
- SUPPLY OF V.F TRANSFORMER OF RATIO 470:600 OHMS (CYLINDER TYPE) — Electrical Equipment & Supplies · Madhya Pradesh
- Handheld Rechargeable Pocket Torch — Electrical Equipment & Supplies · Madhya Pradesh
- Providing and Installing a New Electromagnetic Flow Meter with telemetery at Bhatera Pump House under Balaghat Mine Water Supply Scheme. — Electrical Equipment & Supplies · Madhya Pradesh · ₹1.7L
- Standing Fan and Other items — Electrical Equipment & Supplies · Arunachal Pradesh
- Supply of Fan Belt Generator, Multiwire 10mm, Electrical Boards, Electric Lighter, Multimeter and Rechargeable Bulb — Electrical Equipment & Supplies · Arunachal Pradesh · ₹1.4L
- UPGRADATION OF POWER SUPPLY SYSTEM OF RADAR FWCS IN 14 CORPS ZONE — Electrical Equipment & Supplies · Ladakh
- Lead Acid Storage Batteries For Motor Vehicles with Light Weight and High Cranking Performance (V2) Conforming to IS 14257 — Electrical Equipment & Supplies · Jammu and Kashmir · ₹30.1L
- AIR PURIFICATION MACHINE — Electrical Equipment & Supplies · Delhi