Master Sew Scheme Faridabad- Tertiary treatment with Disc Filters on existing STPs of 45, 80 and 100 MLD along with additional provisions of Blowers, Claridigester, Neutralisation tank, Flash Mixer, Clariflocculator, etc. and OandM/DLP of 11Years
Faridabad Metropolitan Development Authority · Faridabad, Haryana · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹70.5Cr
- EMD: ₹1.4Cr
- Published: 13 Oct 2026
- Closing date: 11 Nov 2026
- Status: open
- Status as of: 28 Oct 2026 09:24 UTC
- Department: Infra-II
- Office: FMDA Office, SCO-28-32, Sector-12, Faridabad 121007
Description
Designing, construction, supply, erection, testing and commissioning of tertiary treatment with disc filters at existing STPs of 45 MLD at Badshapur, 80 MLD at Mirzapur and 100 MLD at Pratapgarh, including additional treatment and electrical provisions, with defect liability period and operation and maintenance for 11 years.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Documents required: Copy of the Final Bill of the work signed by EE Incharge for eligibility prescribed in the Similar Work Conditions as mentioned in ITB
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Item Rate
- Make in India (MII): No
- MSE preference: No
Line items (39)
- Bullet camera Prama Make PTNC123D3=6 Nos,NVR Prama 8ch 4k Network video Recorder PT-NR1A08-Q1=1Nos.,Hard disk drive 4TB SATA=1Nos., POE switch,* 8GE POE plus 2 GE Uplink 250mm POE switch=1Nos,Cat-6 Cable ,25mm PVC conduit with RJ 45 Connectors and lying of conduit and cat-6, accessories(Gitti,Screw,saddle,bend,cable,tie etc)Configuration charges and one year support camera fixing and configuration plus — Qty: 6 Job
- Supply Installation Testing and Commissioning of incoming magnetic Flow meter 1000 mm Complete in all respect to the satisfaction of Engineer-in-charge. — Qty: 1 Each
- Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 35 sqmm — Qty: 950 Per Metre
- Ultrasonic Level Transmitter as per standard specifications. makes Endress,Hauser(EandH) — Qty: 2 NO.
- Ultrasonic level transmeter for level measurement, level control for dry run protection and SCADA as per standard specifications. makes Endress,Hauser(EandH) — Qty: 1 NO.
- SITC of incoming/outgoing Electromagnetic Flow meter 800 mm as per Standard Specification, Endress and Hauser make. complete in all respect as per Engineer In-Charge. — Qty: 1 Each
- SITC of incoming/outgoing Electromagnetic Flow meter 700 mm as per Standard Specification, Endress and Hauser make. complete in all respect as per Engineer In-Charge. — Qty: 1 Each
- Providing and fixing jointing testing commissioning aligning of 400mm Dia MS pipe with 10mm thick food grade epoxy paints complete in all respect and satisfactory of engineer-in-charge. — Qty: 190 Per Metre
- Supplying, jointing with collar welded joint, aligning, fixing of 600 mm Dia ERW MS Pipe with food grade epoxy paint coating on both side complete as per direction of Engineer- in -charge — Qty: 15 Per Metre
- Supply, laying, fixing, jointing and testing of 900 mm dia, 10 mm thick ERW MS pipe conforming to IS 3589, with internal and external surface preparation and application of two coats of epoxy paint/coating conforming to relevant IS specifications, including all necessary welding, fittings, jointing materials, handling, alignment, labour, tools and plants, complete in all respects as per site requirements and as directed by the Engineer-in-Charge. — Qty: 20 Per Metre
- Providing and fixing of 400 mm dia D.I D/F (PN 1.6) manually gear operated sluice valve (IVC, VAG, Kirloskar make) generally conforming to IS:14846, having body, door, dome, gland in graded ductile iron to IS:1865 Gr. 400/15, four faces and spindle nut of LTB to IS 318 Gr. LTB 2, inside screw non-rising stainless steel AISI-410 spindle, valves suitable for a maximum working pressure of 16 kg/cm² (seat test) and body tested to 24 kg/cm². Flanges drilled to IS 1538 Table 4 and 6 including, carriage, loading and unloading complete in all respect as per satisfaction of the Engineer-in-Charge. — Qty: 18 Each
- Providing and Inserting of 1000mm i/d M.S. carrier pipe 12 mm thick (Fe-330 grade) Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect. — Qty: 30 Metre
- Providing and Inserting of 800mm i/d M.S. Carrier pipe 12 mm thick(Fe-330 grade) Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 , external and internal epoxy coating and testing complete in all respect — Qty: 25 Metre
- Construction of building for use of Pump house , Panel room , Operator room, office room and any other purpose required at Sewage treatment plant i/c Providing and fixing Exhaust Fan, Ceiling fan, Tile flooring , Dado, Plinth protection, Window, Door (with wire mash) Electric fitting and plumbing fitting etc. complete in all respect and satisfactory of Engineer-in-Charge — Qty: 880 Sqm
- Design, Supply, installation, testing and commissioning of floor-mounted, indoor type, front-operated, compartmentalized Main LT Panel suitable for operation of 06-08 No. 11000LPM pumps of 28-30KW each with 415V, 3 Phase, 4 Wire, 50Hz AC system, fabricated from CRCA sheet steel with powder-coated finish, IP54 protection, complete with Aluminium busbars, ACB as Grid Incomer, digital multifunction energy meters with CTs, indicating lamps, selector switches, surge protection device (SPD), control wiring, terminal blocks, earth and neutral busbars, and outgoing feeders comprising MCCBs for CCTV Panel, Audio/Video Panel, Street Lighting Panel, External Illumination Panel, Irrigation Panel and Cafeteria Panel, including all internal interconnections, labeling, earthing provisions, accessories, testing, commissioning and handing over complete as per IEC/ IS standards and approved drawings. — Qty: 3 Each
- Design, Supply, installation, testing and commissioning of floor-mounted, indoor type, front-operated, compartmentalized Main LT Panel suitable for operation of pumps of 100HP load with 415V, 3 Phase, 4 Wire, 50Hz AC system, fabricated from CRCA sheet steel with powder-coated finish, IP54 protection, complete with Aluminum busbars, 250A MCCB as Grid Incomer, digital multifunction energy meters with CTs, indicating lamps, selector switches, with 10 Nos 32A Outgoing and 6 Nos 16A outgoing control wiring, terminal blocks, earth and neutral busbars, and outgoing feeders comprising MCCBs for CCTV Panel, Audio/Video Panel, Street Lighting Panel, External Illumination Panel, Irrigation Panel and Cafeteria Panel, including all internal interconnections, labeling, earthing provisions, accessories, testing, commissioning and handing over complete as per IEC/ IS standards and approved drawings. — Qty: 1 Each
- Providing and fixing Local Distribution Board,TPN,IP54 complete with MCBs, RCCB and accessories complete in all respects. — Qty: 3 Each
- Design, Supply, Installation, Testing and Commissioning of Clari digester mechanism for 50MLD capacity claridigester with:- 1.Design, supply and installation of Draft mixture tube of required no suitable to mount over closed RCC vessel capable for pumping sludge from bottom of vessel about 8 Min depth having flame proof motor of minimum 5HP capacity suitable speed reducer, SS/FRP draft tube minimum 3M diameter flared skirt for even sludge distribution arrangement, supporting stand etc along with SS 304 impeller, SS304 deflector, SS 304 suspender assembly, suitable bearing, electric cable and panel etc. 2.Design, supply and installation of Double membrane gas dome for storage of gas of having dimension 15 M dia and 3M height having biogas capacity about 150Cum biogas . The outer membrane Dom/balloon should be UV proof where as the inner membrane should be resistive to H2S gas, Methane gas,CO2 gas under high moisture and temperature condition with suitable capacity of blower with require — Qty: 2 Each
- Design, Supply, manufacturing, Installation, Testing and Commissioning of Biogas scrubber to remove H2S gas from biogas with capacity 2000PPM to 200PPM in SS-304 suitable to handle biogas volume upto 300cum/ h including required accessories like Supply pipe of SS304, safety valve, Electric panel and cable etc.(For50MLD capacity of approved make — Qty: 2 Each
- Design, Supply, manufacturing, Installation, Testing and Commissioning of Biogas Flaring system suitable for 100MLD capacity STP in SS304,suitable to handle biogas volume up to 300Cum/h with suitable foundation and required accessories like Electric panel and cable etc. — Qty: 1 Each
2 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L