Making various types of Sign Boards and fixing at different places of Hingula OCP under Hingula Area.
Mahanadi Coalfields Limited · Hingula OCP, Odisha · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹34.8L
- EMD: ₹44K
- Published: 04 Nov 2026
- Closing date: 14 Nov 2026
- Status: open
- Status as of: 05 Nov 2026 04:03 UTC
- Department: Civil
- Office: Hingula Area
Description
Works tender for making, supplying and fixing various sign boards at different locations of Hingula OCP, including associated civil foundations, steelwork, painting and installation. The BOQ includes glow sign boards, retro-reflective signs and departmental framing boards.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (17)
- 2 — Qty: 3 4
- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. — Qty: 41.875 Cum
- Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. — Qty: 3.118375 Cum
- Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 10.135 Cum
- Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) — Qty: 12.4 Cum
- Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete — Qty: 36.8 Sqm
- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. — Qty: 1488 Kg
- Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). — Qty: 2244.1744 Kg
- Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. — Qty: 4005.44896 Kg
- Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. — Qty: 176.736 Kg
- Providing and fixing bolts including nuts and washers complete. — Qty: 80 Kg
- Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work — Qty: 106.3452 Sqm
- Providing, fabricating, supplying and fixing Glow Sign Board with backlit flex of desired design, consisting of GI box frame made from 0.8–1.0 mm thick galvanized iron sheet with necessary stiffeners of MS flats/angles, including cutting, welding, grinding and finishing, complete with surface preparation, one coat of red oxide primer and two coats of synthetic enamel paint of approved shade, fixing of approved quality 280–320 GSM translucent backlit flex duly printed and stretched on the front face, and providing and fixing LED modules/strips (IP65 rated) inside the box at suitable spacing for uniform illumination including all internal wiring, connectors, LED drivers and power supply, complete with provision of 3 mm thick acrylic/polycarbonate sheet (if required) for support, proper earthing and testing, and fixing the board in position on wall/structure using suitable fasteners, anchor bolts, clamps and brackets, making good the surface as per direction of EIC — Qty: 18.24 Sqm
- Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2010 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800-3 of specification. The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer, fixing on existing MS/Stainless steel frame. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts. — Qty: 44.5648 Sqm
- Providing, fabricating and fixing departmental framing board (non-lit) of approved size and design, comprising framework made out of 25 mm × 25 mm, 18 gauge square MS pipe, fitted with digitally printed premium quality PVC BB flex/banner of minimum 340 GSM duly stretched and fixed over the frame with clamping arrangement/self-tapping screws, including cutting, welding, drilling, primer/paint coating and fixing the frame in position with nuts, bolts, clamps and suitable fasteners, complete with all materials, labour, transportation and erection as per direction of Engineer-in-Charge. — Qty: 52.094 Sqm
- Direction and Place Identification signs upto 0.9 sqm size board. Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2010 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800-3 of specification. The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to ground by means of properly designed foundation with M15 grade concrete 450x450x600mm. The ACM sheet shal — Qty: 13.68 Sqm
- Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. — Qty: 11.17248 Cum
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L