Maintenance and repairing of existing SBDTW Schemes at different locations under Rajnagar Block area under DWS Sub-Division Barpathari during the year 2026-27 (Gr-II)
Chief Engineer, PWD (DWS) · Belonia, Tripura · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹5.9L
- EMD: ₹12K
- Published: 30 Oct 2026
- Closing date: 11 Nov 2026
- Status: open
- Status as of: 01 Nov 2026 14:48 UTC
- Ministry: Government of Tripura
- Department: Public Works Department (Drinking Water and Sanitation)
- Office: Executive Engineer, PWD (DWS) Division, Belonia, South Tripura
Description
Maintenance and repair of existing SBDTW schemes at different locations in Rajnagar Block under DWS Sub-Division Barpathari during 2026-27, including pump lifting and installation, pump and motor repairs, electrical components, pipes, fittings, and associated trenching.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Percentage
- Make in India (MII): No
- MSE preference: No
Line items (33)
- 2 — Qty: 4 5
- Lifting of submersible pump with delivery assembly by heavy duty chain - pully after dismantling from delivery line and staking properly as per direction of the Engineer-in-charge. — Qty: 38 Nos
- Labour charge for fitting fixing and lowering of Submersible pump sets with delivery assembly 900 to 00 in/c re-fitting fixing with the delivery line etc as per direction of the Engineer-in-charge. — Qty: 38 Nos
- Repair and maintenance of submersible of Motor suitable for submerssible pump set by complete dismantling in/c providing & fitting fixing of PVC (IS:8783-1978) insulated electro grade copper (IS : 613-1984) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necesary trial run as per specification and direction of the Engineer-in-charge. i) 2.0 HP Motor suitable for 2000 GPH capacity submersible pump set. — Qty: 35 Nos
- Repairing of 2000/2500 GPH capacity submersible pump set in/c dismantling and reassembling of new impeller, casing ring, bush & bearing etc. fitting fixing and satisfactorily trial run complete as per direction of the Engineer-in-Charge. — Qty: 25 Nos
- Providing & fitting fixing of single phase motor starter unit (with 2 phase contractor , overload relay, Volts meter & Amps meter 32 amps Main Switch (220 volts) of Havels/ BCH/L & T make in KISOSK including necessary electric wiring and G.I pipe eathing etc. complete as per direction of the Engineer-in-charge. i) For 2 phase submersible Motor — Qty: 8 Nos
- Providing and fitting fixing of 1500 GPH capacity submersible with 10 stage pump with suitable single phase 2 HP submerssible motor with head of 48.00 mtr DUKE make/VARUNA Make/ and other ISI mark make etc complete in all respect as per direction of the Engineer-in-charge. — Qty: 3 Nos
- Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of Thermal release range, 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. i) 25-32 Amps — Qty: 3 no
- Providing and fixing C.I non-return valve of approved quality as per CPWD specification and direction of the Engineer-in-charge. i) 50 mm nominal bore — Qty: 5 no
- Providing and fitting fixing with PVC insulated 3 core flat Copper cable coforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. i) 2.50 sqmm — Qty: 100 mtr
- Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge. A) For UPVC pipes in new work a) In all kinds of soil i) For pipes not exceeding 90 mm dia — Qty: 300 mtr
- i) 40 mm dia. — Qty: 100 mtr
- ii) 50 mm dia. — Qty: 50 mtr
- i) 15 mm dia — Qty: 2 no
- ii) 40 mm dia. — Qty: 2 no
- iii) 50 mm dia. — Qty: 2 no
- a) 15 x 15 x 15 mm dia — Qty: 2 Nos.
- b) 40 x 40 x 40 mm dia. — Qty: 2 Nos.
- c) 50 x 50 x 50 mm dia. — Qty: 2 Nos.
- i) 15 mm dia — Qty: 2 no
2 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
- Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
- CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
- Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
- Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
- Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
- P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L