KORADACHERY TOWN PANCHAYAT MP FUND
Koradacheri Town Panchayat, Thiruvarur · Tamil Nadu · Civil Works & Infrastructure · open
Key facts
- Tender value: ₹14.5L
- EMD: ₹15K
- Published: 26 Sep 2026
- Closing date: 08 Oct 2026
- Status: open
- Ministry: Directorate of Town Panchayats
- Department: Thanjavur Zone
Description
Construction of Public Distribution shop at Ward No 2 In Koradachery Town Panchayat.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Open Tender
- Make in India (MII): No
- MSE preference: No
Line items (28)
- Earth work excavation for foundation, etc., in all soil sand sub- soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring, shuttering, bailing out water wherever necessary refilling the foundation with excavated earth other than sandy soil in layers of not more than 15 cm thick well rammed and depositing the surplus earth within the compound in place shown by the departmental officers within an initial lead and lift and clearing and levelling the site etc.,complete — Qty: 57.5 M3
- Supply delivery and filling of Stone Dust in layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand to Site and all labour charges and all other incidental charges etc,. complete as per Standard Specification — Qty: 17.3 M3
- Cement Conceret 1:4:8 (One Cement four M-sand and Eight aggregate) using 40mm hard broken granite stone jelly for foundation including dewatering and wherever necessary laying in layers of 15cm thick and consolidated and curing complying with standard specification and as directed by the departmental officers etc., complete. — Qty: 15 M3
- Supplying and errecting centering for plane surfaces such as RCC slab,beam etc.,including strutting upto 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm for boarding laid over country wood (silver Oak) joists of size 10cm X 6.5cm spaced at 90cm centres and supported by casurina props of size 10 - 13cm dia spaced at 75cm centres including necessary cross bracings etc., complete complying with standard specifications. Without Strutting — Qty: 54.1 M2
- With strutting Column — Qty: 36.8 M2
- Plain surface — Qty: 114.8 M2
- Reinforecement Cement concrete 1:11/2:3 ( one cement one and half part M-sand and three aggregate) using 20mm size hard broken granite stone jelly for plain concrete including cost of material machine for mixng motor, vibrating charges shoring, strutting and Dewatering wherever necessary laying in layers of 15cm thick consolidation and curing inclusife of all lead and lift etc., complete and as per directed by the departmental officers. Up to Basement — Qty: 9.38 M3
- Above Basement — Qty: 15.25 M2
- Supplying fabricating and placing in position of M.S or RTS rods including cutting, bending, placing and tying in position including cost of binding wire etc complete as per standard specification. — Qty: 1672.8 M3
- Brick work in Cement Mortar in 1:5 ( One cement and Five M -Sand ) using best quality of Country bricks of size 8¾x 4 ¼ x 2 ¾ including all cost of materials and labour charges including Curing charges etc., complete as per Standard Specificationand as directed by department officials. Up to Basement — Qty: 14.5 M2
- Above Basement — Qty: 21.7 M3
- Special Plastering with cement mortar 1:3 (One cement three P -sand) 10mm thick including cost and conveyance of materials to site and including all labour charges etc complete. — Qty: 81 M2
- Plastering walls with cement mortar 1:5 (One cement five P-sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges,Curing etc completeand as directed by department officials. — Qty: 170 M3
- Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A. — Qty: 250 M2
- Manufacturing, supplying and fixing in position steel Windows / Ventilators of the following types; outer frames and shutter frames shall be made out of steel sections confirming to IS.7452 / 1990 t of ‘Z’ section (F.7D) of size 25mm x 20mm x 3mm and mullions are made of (F4B) ‘J’ sections of size 46mm x 25mm x 3mm and sash bars shall be made of ‘T’ section (T2) of size 25mm x 22mm x 3mm. including providing handle cum latch with suitable open shall be left for its easy operation and adjustable wind stay of sufficient length shall be provided for each shutter and with necessary MS angle hold fasts welded to the outer frame and 12mm MS square guard bars shall be welded to the inner flat of the window at equal intervals not exceeding 100 mm spacing and welding 18G MS sheet for panes and including one coat of red oxide primer and charges for fixing in position including dismantling the masonry, concrete and redoing the same duly packed with concrete etc., complete and as directed by the departmental officers. Window — Qty: 2.9 M2
- Ventilator — Qty: 1.1 M2
- Supplying, fabricating and fixing in position of mild steel door with single/double shutters using M.S angle of size 40 x 40 x 6mm for outer frames and 35 x 35 x 5mm for shutter frames, fully covered with M.S sheet of 18 gauge with M.S flat of size 32 x 6 mm for internal stiffners and one number of aldrop , two numbers of tower bolts, holdfasts, hinges, handles etc., including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials labour charges for fixing the door in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete. Double shutter — Qty: 2.6 M3
- Single Shutter — Qty: 1.4 M3
- Supplying and fixing of push and pull type Roling shtter confirming to IS 6248/1979 and as amended from time to time. With ISI make of approved size and section using 18 gauge G.I.sheet.The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of Hood covers , transportation charges etc., and as directed by Engineer incharge. — Qty: 12 M2
- Painting new iron works with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc., complete as per standard specification. — Qty: 39 M2
1 tender document(s) available — sign up to download.
Related tenders
- UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
- TTPS Operation Circle CAD ACWPH Annual Overhaulinlg DG Set III Attending minor repair works, Dismantling and Cleaning of Heat exchanger, DM water tank and Replacement of Coolant — Civil Works & Infrastructure · Tamil Nadu
- Road renovation work on the Fatehpur Minor from km 2.600 to km 5.400 — Civil Works & Infrastructure · Uttar Pradesh
- Constuction of Community Compost Pit at Purkhu Panchayat Kot Lower A Khass Block Bhalwal — Civil Works & Infrastructure · Jammu and Kashmir · ₹36K
- Facility Management Services - LumpSum Based - Anganwadi Centres — Civil Works & Infrastructure · Jharkhand · ₹25.8Cr
- Upgradation of Arjun Mess consisting of following items along with installation — Civil Works & Infrastructure · Telangana
- Warehousing Service - Per MT - Monthly Basis - Rehiring of Godown under modified PWS scheme at revenue district — Civil Works & Infrastructure · Jharkhand
- Hiring of Third-Party Inspection Agency - Construction / Civil Engineering Works — Civil Works & Infrastructure · Assam