KMC/GRBU/SO-21/26-27

Kolkata Municipal Corporation · Kolkata, West Bengal · Civil Works & Infrastructure · open

Key facts

Tender value: ₹1.7L
EMD: ₹4K
Published: 12 Oct 2026
Closing date: 27 Oct 2026
Status: open
Status as of: 19 Oct 2026 00:19 UTC
Department: Sewerage & Drainage Department
Office: Dy.CE(M)/S&D

Description

Repair and replacement of damaged pipelines and valves in the plumbing network system and reservoir, including allied works, at Begore Khal DPS under GRBU.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Documents required: Trade/professional licence under Section 199/200 of the Kolkata Municipal Act, 1980, Declaration regarding interest or share of a Municipal Officer or Servant in the tenderer's business, Declaration of relationship or close connection with the Mayor, Deputy Mayor, Aldermen, Councillors or Corporation officers

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage
Evaluation: The fairness of the quotation and the past conduct of the contractor will be taken into consideration; the Corporation is not bound to accept the lowest tender.
Make in India (MII): No
MSE preference: No

Line items (28)

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m In ground floor including roof (b) above 150 mm. thick — Qty: 4.37 CUBIC METER
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. — Qty: 4.5 SQUARE METER
Labour for laying single brick flat soling including ramming and dressing bed to proper level and filling joints with powdered earth. — Qty: 4.5 SQUARE METER
Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation (a) 1:3:6 proportion — Qty: 1.125 CUBIC METER
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety — Qty: 3.74 CUBIC METER
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m. — Qty: 0.141 MATRIC TON
Terraced flooring of lime concrete with stone lime, surki & 32 mm down Jhama khoa(1.5:2:7) (1.5 lime putty:2 surki: 7 jhama khoa) (a) 75 mm. thick — Qty: 4.5 SQUARE METER
40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with water proofing compound of approved brand @ 0.2% weight of cement including cost of materials over two coats of non toxic acrylic polymer modified cementitious waterproofing slurry coat complete [cost of water proofing compound and non toxic paint to be paid seperately) for underground water retaining structures. — Qty: 21.5 SQUARE METER
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster — Qty: 16 SQUARE METER
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc — Qty: 21.5 SQUARE METER
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 with all necessary accessories,specialsviz.socket,bend,tee,union,cross,elbo,nipple,longscrew, reducing socket, reducing tee, short piece etc.fitted with holder bats clamps, including cutting pipes,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (a) For Exposed Work CPVC Pipes Class-1, SDR-11 Dia) 15 mm — Qty: 41 METER
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 with all necessary accessories,specialsviz.socket,bend,tee,union,cross,elbo,nipple,longscrew, reducing socket, reducing tee, short piece etc.fitted with holder bats clamps, including cutting pipes,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (a) For Exposed Work CPVC Pipes Class-1, SDR-11 Dia) 25 mm — Qty: 75 METER
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 with all necessary accessories,specialsviz.socket,bend,tee,union,cross,elbo,nipple,longscrew, reducing socket, reducing tee, short piece etc.fitted with holder bats clamps, including cutting pipes,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (a) For Exposed Work CPVC Pipes Class-1, SDR-11 Dia) 50 mm — Qty: 24 METER
Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007Q) Ball Valve (a)15mm — Qty: 5 EACH
Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007Q) Ball Valve (a)50mm — Qty: 4 EACH
Supplying, fitting and fixing bib cock or stop cock. (c) (ii) Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model - Florentine of Jaquar or similar brand). — Qty: 5 EACH
Supplying, fitting and fixing bib cock or stop cock. (f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent) 15 mm — Qty: 7 EACH
C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. (v) 150 mm — Qty: 1 EACH
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity — Qty: 2 EACH
Labour charge of plumbing mistry for this work — Qty: 7 EACH

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
imp. Sarvice lane With Nali from Juhi lal colony in Block No 315/4 Block No 317 in ward 84 Zone 3 — Civil Works & Infrastructure · ₹8.3L
GENERAL REPAIR WORK AT JOINT DIRECTOR SECONDARY EDUCATION OFFICE UDAIPUR — Civil Works & Infrastructure · Rajasthan · ₹15.0L
4 NARSAR KARAHIYA SAMPARK MARG SE JUNIOR HIGH SCHOOL TAK PITCH MARG KA LEPAN ANURAKSHAN (SAMANYA MARAMMAT) KARYA.(HOT MIX) — Civil Works & Infrastructure · Uttar Pradesh · ₹15.3L
Laying RMC M40 in various streets of transport nagar ward no. 30 — Civil Works & Infrastructure · Punjab · ₹1.8Cr
Estimate For Laying 315mm Dia UPVC U/G Pipe Line For Outlet RD 13350/R of Shahpurkandi Channel No.3 For Year 2026-27 — Civil Works & Infrastructure · Punjab · ₹51.7L
In Ward-30 Govind Vihar II, work of drain and interlocking tiles from Harendra house to Omendra house and Pravesh house, Sundar house — Civil Works & Infrastructure · ₹19.1L
purani nagar panchayat ke sthan par shoping complex cum office dukan no 05 — Civil Works & Infrastructure · Madhya Pradesh · ₹8.0L