Job no CRIF KNT 2026 27 186 Improvement Road Bhatkal Sorab SH 50 From Km. 16.00 to Km.16.50 And From Km.25.25 to Km. 26.31 in Uttara Kannada District

National Highway North Zone · Uttara Kannada, Karnataka · Civil Works & Infrastructure · open

Key facts

Tender value: ₹1.6Cr
EMD: ₹2.5L
Published: 13 Oct 2026
Closing date: 12 Nov 2026
Status: open
Status as of: 24 Oct 2026 05:39 UTC
Ministry: Ministry of Road Transport and Highways
Department: Karnataka Public Works Department
Office: Office of the Executive Engineer, National Highway Division, Belagavi

Description

Improvement of SH-50 between Bhatkal and Sorab at two road sections in Uttara Kannada District, Karnataka. The work includes road improvement and associated pavement, drainage, safety barrier and road marking works. Estimated value is Rs. 16,325,525; completion period is 6 months including monsoon.

Eligibility & requirements

Past performance: 50%
Startup relaxation: No
MSE relaxation: No
Documents required: Audited CA Certificate of Annual Turnover with UDIN preferred, Work Done Certificate for similar road improvement work, Work Done Certificate for asphalting works (DBM/BC), EMD Bank Guarantee, Calculation sheet of available tender capacity on letterhead, Line of credit certificate or Bankers Certificate, Prescribed qualification information and completed bid formats, Valid KPWD/MoRTH contractor registration certificate

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Evaluation: Two-cover procedure: technical qualification followed by evaluation of financial bids of qualified tenderers
Make in India (MII): No
MSE preference: No

Line items (18)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness.including all labour, usage charges of all machinery etc., complete. (for new roads),In area of light jungle - By Mechanical Means using Dozer" as per Direction of Engineer in charge. — Qty: 0.1992 Hectare
Providing and applying tack coat with VG-10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., complete, with lead for bitumen. as per Direction of Engineer in charge. — Qty: 9731.25 Sqm
Providing and laying dence graded bituminous macadm with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG -30 Grade paving bitumen as per clause 500.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth whelled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respect including cost of all materials all labour, usage charges of all machinery, all lead, lifts, loading, unloading stacking transporting etc., complete, including lead for bitumen, with a lead of mixed material, excluding cost of primer/ tack coat 50 mm compacted thickness. Ref. to MoRT&H Specification 505 as per Direction of Enginee — Qty: 509.39 Cum
Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 5.4 per cent of mix and filler at 2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, including lead for bitumen, with a lead of mixed material , excluding cost of primer/ tack coat- 30 mm compacted thickness. Grading -II as per Direction of Engineer in charge. — Qty: 291.94 Cum
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., complete. (New road formation)as perdirection of Engineer Incharge. — Qty: 347.6 Cum
Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811, including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. Type - B, "THRIE" : Metal Beam Crash Barrier — Qty: 748 Metre
Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimension to the requirement of clause 301 and 309. Excavated materail to be used in embackment within a laod of 1000 meters including all labours, load, unload, usage charges of all machinery etc., complete. Ref. to MoRT&H Specification 309 as per Direction of Engineer in charge. — Qty: 2656 Metre
Road marking with Hot applied Thermoplastic compound with Reflectorising glass beads on bituminous surface providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectiorising glass beads at 250gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes,including, barricading , traffic diversion as per IRC- 3, cleaning the surface of dirt, dust and other foriegnmatter, demarcation at site, traffuc control, cost of all materials all labour lead, lifts, loading, unloading transporting etc., complete.Ref. to MoRT&H Specification 507(2.5mm thick) as per Direction of Engineer in charge. — Qty: 379.5 Sqm
Supplying & Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by t — Qty: 416 Each
Providing and fixing of retro-reflectarised cautionary ,mandatoryand informatory sign as per IRC:67 made of class B Type IV retro reflective sheeting fixed over 2mm thick Aluminium sheeting vide clause 801.3, 4mm thick aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25x25x3mm angle mounted on a mild steel circular pipe 65NB 3.60mtrs high (min effective height 1.30 mtrs) ,3.2mm thickness firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67,as per clauses including curing cost of all materials all labour, lead, lifts,loading, unloading transporting etc., complete.90cm equilateral Triangle as per Direction of Engineer in charge. — Qty: 9 Each
Providing and fixing of retro-reflectarised cautionary ,mandatoryand informatory sign as per IRC:67 made of class B Type IV retro reflective sheeting fixed over 2mm thick Aluminium sheeting vide clause 801.3, 4mm thick aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25x25x3mm angle mounted on a mild steel circular pipe 65NB 3.60mtrs high (min effective height 1.30 mtrs) ,3.2mm thickness firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67,as per clauses including curing cost of all materials all labour, lead, lifts,loading, unloading transporting etc., complete.90cm Circular as per Direction of Engineer in charge. — Qty: 10 Each
Providing and fixing of retro-reflectarised cautionary ,mandatoryand informatory sign as per IRC:67 made of class B Type IV retro reflective sheeting fixed over 2mm thick Aluminium sheeting vide clause 801.3, 4mm thick aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25x25x3mm angle mounted on a mild steel circular pipe 65NB 3.60mtrs high (min effective height 1.30 mtrs) ,3.2mm thickness firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67,as per clauses including curing cost of all materials all labour, lead, lifts,loading, unloading transporting etc., complete.60 cm x 50 cm rectangular (Chevron) — Qty: 16 Each
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including cost of all materials all labour, lead, lifts, loading, usage charges of machinery, unloading transporting etc., complete. 5th kilometre stone (precast) — Qty: 5 Each
Providing and erecting Project Disply board of size 1.80 vertical x 1.6 M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6 mm thickness) sheering sthrenghtened by welding to MS angle of size 35x 35x5 mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both side of the board and all MS iron framework, background of the facing side of the board painting in traffic yelloew, project information written in englisgh /kannada/ hindi , painting letters and numbers in black fixed on a mild steel angle iron post 75mm x75mm x 6mm, 2nos. firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x45cm x 60 cm, 60cm below ground level and the board 2.8 m from ground level as per apprved drawing ( excluding cost of lattering ) including cost of all materials all labours, lead, lifts, loading, unloading transporting etc., complete — Qty: 2 Each
Network Survey Vehicle (NSV) attached with SUV Data collection of Longitudinal profiling (International roughness Index) . Transverse profiling (Rut depth) Pavement texture in terms of Mean profile depth , Road Geometry data, (Cross slope, gradient, curvature), GPS Coordinates (X, Y, Z) viz longitudinal, latitude & altitude, Video Imaging for Road side furnitures / Road assets and Video imaging for pavement surface Distress and reports. as per Direction of Engineer in charge. — Qty: 1.66 Km
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including cost of all materials all labour, lead, lifts, loading, usage charges of machinery, unloading transporting etc., complete. Ordinary kilometer stone (precast) — Qty: 21 Each
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including cost of all materials all labour, lead, lifts, loading, usage charges of machinery, unloading transporting etc., complete. 200 kilometer stone (precast)Hectometer stone — Qty: 105 Each
Supply and installation of retro- reflective Chevron signboards of 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2022 & ASTM D 4956-09 specification & fixed over 3 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin on both sides & fixed over back support frame of 25x25x3mm MS angle frame. Supported on 75 mm dia OR 75x75x6mm Mild steel with clear height of not less than 2.1 m from the ground level to the bottom of the Sign board & 60 cm below ground level.The sign post should be painted with one coat of red oxide paint and two coats of synthetic enamel paint of black and white colour with bands of 30 cm height, firmly fixed to the ground by means of foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost & conveyance of all materials,equipment,machinery & Labour with all leads and lifts for satis — Qty: 30 Each

4 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L