JJM Water Supply Scheme at Jamin Ch Para under Purba Sabroom VC South Tripura comprising 5 Small Bore Deep Tube Wells pipelines of various diameters submersible pump motor sets and allied works under DWS Sub Division Rupaichari during 2026 27

Chief Engineer, PWD (DWS) · Sabroom, Tripura · Civil Works & Infrastructure · open

Key facts

Tender value: ₹32.5L
EMD: ₹65K
Published: 05 Nov 2026
Closing date: 13 Nov 2026
Status: open
Status as of: 08 Nov 2026 02:34 UTC
Department: Public Works Department (Drinking Water and Sanitation), Government of Tripura
Office: Executive Engineer, DWS Division, Sabroom

Description

Construction of five small bore deep tube wells, laying of pipelines of various diameters, installation of submersible pump-motor sets and allied works for the JJM water supply scheme at Jamin Ch. Para under Purba Sabroom VC, South Tripura, during 2026-27.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Documents required: Bidder structure and legal status documents, Government registration particulars, Declaration of the bidder, Integrity Agreement, Bid fee payment proof, Earnest Money Deposit payment or guarantee

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage Rate
Make in India (MII): No
MSE preference: No

Line items (43)

2 — Qty: 4 5
Drilling and boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engineer - in - charge. i)100 mm dia. — Qty: 550 Mtr.
Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means, disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the Engineer - in - charge. i) From 100 mm dia pilot hole to 250 mm bore hole — Qty: 550 Mtr.
Providing andfixing of UPVC end cap/ well cap suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge. i) 100 mm dia. — Qty: 5 Mtr.
A. UPVC 'CS' casing pipe i) 150 mm dia. — Qty: 165 Mtr.
ii) 100 mm dia. — Qty: 230 Mtr.
B. UPVC 'RS' pipe i) 100 mm dia. — Qty: 155 Mtr.
Providing and fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge. i) 150 x 100 mm dia. — Qty: 5 Nos.
Providing and shrouding of the deep tube well assembly with washed pea gravels ( 2.0- 4.75 mm effective size ) as per specification ( IS : 4097) and direction of the Engineer- in-charge. A. with contractor's rig i. with pea gravels obtained from Durgapur, West Bengal. — Qty: 21.9 cum
Providing and fixing of housing clamp(made with 12mm thick MS sheet) alongwith well cap (made with 10 mm thick MS sheet) with necessary arrangements for SBDTW as per specification and direction of the Engineer - in - charge. i) 150 mm dia. — Qty: 5 Nos.
Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer - in - charge. — Qty: 550 No.
Supplying and fitting fixing of submersible pump of 2000 GPH Capacity, 45 mtr head with motor of 3 HP required capacity single phase including 40 mm dia 30.00 mtr. heavy duty G.I. pump assembly and reducing socket, delivery band 90 Non-return valve and fitting etc. as per direction of the Engineer-in-charge. — Qty: 5 job
Suppling and fitting fixing of M.S(18SWG)"KIOSK"(size;-width450 mm X length 1200 mm x height 850 mm) fitted with 4 Nos .support of 75 mm X 75 mm (6 mm thick) M.S angle for embedding in 1:2:4 cement concerete bass (size 300 mm X 300 mm X 600 mm) with proper locking arrangement and coated with anti-corrisive base ( size 300 mm x 300 mm x 600 mm) with proper locking arrangement and coated with anti-corresive paint (both inside and outside) including necessary provisions for fitting fixing of single phase motor starter unit,main switch, energy meter etc, complete in all respect as per direction of the Engg.- In-charge. — Qty: 5 job
Supplying and fitting fixing of single-phase motor starter unit (with 2 pole contactor, overload relay, Volt meter & Amp. Meter), 32 Amps main switch(220 volt) o f Havels/BCH/L&T make in KIOSK including necessary electrical wiring and GI pipe earthing etc. complete as per direction of the Engg. in-charge.(2 Hp/3Hp Motor) — Qty: 5 job
Trial run and comissioning of the scheme in all respect as per direction of the Engg. In-charge. — Qty: 5 job
Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. i) 2.50 sqmm. — Qty: 250 Mtr.
Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. i) 25-32 Amps — Qty: 5 Jobs
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil — Qty: 2.43 cum
Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. — Qty: 0.61 cum
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) — Qty: 2.025 cum

5 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L