Internal Painting external wall cum duct Waterproofing Works at SVPB Guest House, SVNIT Campus, Surat

Sardar Vallabhbhai National Institute of Technology, Surat · Surat, Gujarat · Civil Works & Infrastructure · open

Key facts

Tender value: ₹48.3L
EMD: ₹97K
Published: 21 Oct 2026
Closing date: 11 Nov 2026
Status: open
Status as of: 28 Oct 2026 06:42 UTC
Ministry: Ministry of Education
Department: Estate Section
Office: Estate Section, Administrative Building, SVNIT

Description

Open percentage-rate works tender for internal painting, external wall and duct waterproofing at the SVPB Guest House, SVNIT Campus, Surat. Estimated cost is ₹48,30,282, EMD is ₹96,700, and the completion period is 75 days. Bids are submitted in a two-bid system.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Documents required: Valid registration certificate of PWD/CPWD/MES/Municipal Corporation/Semi Government Organization for civil works, Bank solvency certificate of a Nationalized Bank/Scheduled Bank for a minimum of ₹19,33,000, not older than one year, Valid GST registration certificate and PAN, Earnest Money Deposit payment evidence and Annexure-I, Partnership deed or memorandum and articles of association, if applicable, Power of attorney authorizing the person(s) to sign agreements/bills and collect cheques, Registration under the Employees’ Provident Funds and Miscellaneous Provisions Act, 1952, Similar-work details and completion certificates meeting one of the stated work-value criteria, with Annexure-II, Turnover Certificate and CA Report for the last three financial years, Tender Acceptance Letter (Annexure-III), Bidder’s Information (Annexure-V), Site Visit Certificate (Annexure-VI)

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Percentage Rate
Evaluation: Percentage rate
Make in India (MII): No
MSE preference: No

Line items (31)

2 — Qty: 3 4
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR-15.56) — Qty: 10 sqm
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. (DSR-13.12) — Qty: 10 sqm
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) (DSR-14.1.1) — Qty: 10 sqm
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR-13.91) — Qty: 11500 sqm
Filling of cracks in internal/external walls with Sika cracksil Acrylic paste or Dr. fixit crack-X paste or equivalent (ready to use paste) prepare surface by cleaning the surface to remove any dirt or loose particle and widening the cracks 4 to 6 mm wide and 6mm deep moistering with water and applying Dr. Fixit primeseal or equivalent, & allow it set for 24 Hrs. and then apply another coat, making sure that crack is totally filled up tooling the surface to obtain an even smooth and unbroken surface and curing of the cracks for all lift as directed by the Engineer-in-charge. (As per M.R.+1% L.C.= 75+0.75=75.75) — Qty: 500 metre
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR 13.80) — Qty: 3000 sqm
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm (DSR-13.48.1) — Qty: 10500 sqm
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture (DSR-13.48.3) — Qty: 400 sqm
Providing and applying a complete waterproof coating system on top of concrete roof /horizontal masonry surfaces and other exposed areas, comprising: (i) Surface Preparation: Scraping and cleaning the surface with wire brushes & pressure pump to remove dust, loose particles, algae, or laitance, including minor patchwork repairing of surface with cement mortar to ensure a sound substrate. (ii) Crack Treatment: Treating hairline and minor cracks up to 5 mm width using ready-to-use acrylic crack filler paste (Dr. Fixit Crack-X Paste or equivalent). Cracks shall be opened slightly in U-groove profile where necessary and filled using putty knife/spatula to ensure complete filling and smooth finish, cured as per manufacturer’s specifications. (iii) Elastomeric Waterproofing Membrane: Applying fibre-reinforced elastomeric liquid waterproofing membrane with resilient acrylic polymers (Asian Paints Damp Proof Xtreme or equivalent) in three coats: one coat of self-priming with brush (diluted 3:1 — Qty: 160 sqm
Providing and applying a complete waterproofing system on vertical concrete/masonry surfaces including parapet walls, exterior wall and other exposed areas, comprising: (i) Surface Preparation: Scraping and cleaning the surface with wire brushes / and pressure wash using pump to remove dust, loose particles, algae, or laitance, including minor patchwork repairing of surface with cement mortar to ensure a sound substrate. (ii) Crack Treatment: Treating hairline and minor cracks up to 5 mm width using ready-to-use acrylic crack filler paste (Dr. Fixit Crack-X Paste or equivalent). Cracks shall be opened slightly in U-groove profile where necessary and filled using putty knife/spatula to ensure complete filling and smooth finish, cured as per manufacturer’s specifications. (iii) Elastomeric Waterproofing Membrane: Applying fibre-reinforced elastomeric liquid waterproofing membrane with resilient acrylic polymers (Asian Paints Damp Proof Xtreme or equivalent) in two coats: one coat of self — Qty: 1250 sqm
Transparent Waterproofing Coating on External Stone Grit/Sand faced Plaster Providing and applying a UV-resistant, non-yellowing, transparent liquid waterproofing system over existing stone grit plaster to arrest water leakage without altering the original plaster color or texture, comprising: (i) Surface Preparation: Pressure-washing and scrubbing with wire/nylon brushes to remove dust, algae, moss, and loose particles without dislodging stone aggregates. (ii) Crack Sealing: Routing hairline cracks up to 5 mm width into a U-groove profile and sealing flush with clear acrylic/PU sealant (Dr. fixit kwik n ezee klear / Sikaflex Clear or equivalent). (iii) System Application: Applying two coats of single-component aliphatic PU/acrylic transparent coating (Dr. Fixit Repellin WR / Asian Paints SmartCare Clear / Fosroc Nitocote Clear or equivalent) strictly as per manufacturer specifications - diluted or undiluted required coats as per total consumption rate of as per manufacturer specificat — Qty: 400 sqm
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25 mm average thickness (DSR- 26.28.3) — Qty: 10 sqm
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 50 mm average thickness (DSR- 26.28.2) — Qty: 10 sqm
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter (DSR- 26.29.1) — Qty: 50 metre
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars above 12 mm diameter (DSR- 26.29.2) — Qty: 50 metre
Applying priming coat: With ready mixed epoxy Zinc primer of approved brand and manufacture on steel galvanised iron/ steel works. (DSR- 13.50.3) — Qty: 10 sqm
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. (DSR- 26.31.1) — Qty: 10 sqm
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. (Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).12 mm average thickness. (DSR-26.32.1) — Qty: 1.017 sqm
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. (Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 25 mm average thickness in 2 layers. (DSR- 26.32.2, P/362) — Qty: 10 sqm

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L