Installation of Open Gym, Jhulas and Maintenance Work in Devilal Park

MC Barwala · Barwala, Haryana · Civil Works & Infrastructure · open

Key facts

Tender value: ₹5.9L
EMD: ₹12K
Published: 01 Oct 2026
Closing date: 12 Oct 2026
Status: open
Status as of: 06 Oct 2026 16:16 UTC
Department: Urban Local Bodies

Description

Tender for civil works including installation of open gym equipment, jhulas, maintenance, street lighting, cable supply, and fitness equipment in Devilal Park, MC Barwala, Ward no 02.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Open Tender
Make in India (MII): No
MSE preference: No

Line items (7)

Multiplay Station jhula with size 27*15*13ft with 1 Nos climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 ft long Spiral Slider of 6mm thick, 10 ft long Wave Slider of 6mm thick, Tunnel 5 ft long of 4mm thick Etc. with 3” sq. pipe, 1.6” sq. pipe, 3”*1” sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom. — Qty: 1 Each
Basic cost of Supply and Erection of 3Mtr. Decorative Pole with Post Top LED light of 30 watts complete in all respect as per drawing new — Qty: 10 Each
Supply, erection, testing and commissioning of 3 phase Automatic timer AMSons/LandT/Indoasian/CandD make to ON/OFF the street light on different fixed timing maintainable on street light pedestal, pillar, wall M.S. pedestal where ON/OFF point is available, cabinet is fabricated from 22 gauge, painting, wiring, connection ON/OFF from bottom of the cabinet, 3 contractors 25 Amp, 24 volts D.C. each 2 transformers, rectifier system, switching system, Bakelite contractor, 32 Amp, MCB, 32 amp Havells digital timer Auto/Manual system, time setter, fiber sheet, rubber, and plastic component, wiring and component fitting, chemical (Epoxy) the job includes allied material, labour, erection, testing and commission at site including cost of material complete in all respect up to the entire satisfaction of Engineer-in-Charge. — Qty: 10 Each
Supply of PVC sheathed aluminium flexible cable in existing pipe/trench etc. of size 1.5 sq mm 2 core for working voltage up to 1100 volts conforming to IS1554 (Part-1) 1988/7098 (Part-1) with aluminium conductor ISI marked complete in all respect as per standard specification up to the entire satisfaction of Engineer-in-charge (Make: - Grandlay| Havells| KEI or its equivalent) — Qty: 115 Metre
Providing and fixing of Leg Press Dual equipment made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.60mm seamless pipe bushes.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality.High quality rubber grip are also used for firm handling.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness. — Qty: 1 Each
Providing and fixing of Double Twister/Standing Twister equipment made up of 3inch B class GI pipe: Prime Stand duly, Foundation center pipe.60mm seamless pipe bushes.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness. — Qty: 1 Each
Providing and fixing of Seated Rowing equipment made up of 3inch Bclass GI pipe: Prime Stand duly bend, Foundation center pipe.The pins used are made up of 25mm hardened bright bar.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality.High quality rubber grip are also used for firm handling.The bushes (Stopper) used to avoid the collision.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness — Qty: 1 Each

1 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
imp. Sarvice lane With Nali from Juhi lal colony in Block No 315/4 Block No 317 in ward 84 Zone 3 — Civil Works & Infrastructure · ₹8.3L
GENERAL REPAIR WORK AT JOINT DIRECTOR SECONDARY EDUCATION OFFICE UDAIPUR — Civil Works & Infrastructure · Rajasthan · ₹15.0L
4 NARSAR KARAHIYA SAMPARK MARG SE JUNIOR HIGH SCHOOL TAK PITCH MARG KA LEPAN ANURAKSHAN (SAMANYA MARAMMAT) KARYA.(HOT MIX) — Civil Works & Infrastructure · Uttar Pradesh · ₹15.3L
Laying RMC M40 in various streets of transport nagar ward no. 30 — Civil Works & Infrastructure · Punjab · ₹1.8Cr
Estimate For Laying 315mm Dia UPVC U/G Pipe Line For Outlet RD 13350/R of Shahpurkandi Channel No.3 For Year 2026-27 — Civil Works & Infrastructure · Punjab · ₹51.7L
In Ward-30 Govind Vihar II, work of drain and interlocking tiles from Harendra house to Omendra house and Pravesh house, Sundar house — Civil Works & Infrastructure · ₹19.1L
purani nagar panchayat ke sthan par shoping complex cum office dukan no 05 — Civil Works & Infrastructure · Madhya Pradesh · ₹8.0L