Improvements and widening to road connecting NH-48 to Hunusekatte via Tamatadakallu-Papenahalli from Ch 10.00 to 25.00 Km (in Selected reaches)

National Highways · Challakere, Karnataka · Civil Works & Infrastructure · open

Key facts

Tender value: ₹4.9Cr
EMD: ₹7.3L
Published: 03 Nov 2026
Closing date: 17 Nov 2026
Status: open
Status as of: 08 Nov 2026 22:36 UTC
Ministry: Ministry of Road Transport and Highways
Department: Karnataka Public Works Department
Office: Office of the Executive Engineer, National Highway Division, Chitradurga

Description

Road improvement and widening works on selected reaches between NH-48 and Hunusekatte via Tamatadakallu-Papenahalli, including earthwork, pavement construction, drainage, road safety features, signage and markings. Estimated contract value is Rs. 485.79 lakh excluding GST; completion period is 6 months.

Eligibility & requirements

Past performance: 50%
Startup relaxation: No
MSE relaxation: No
Certifications: UDIN-generated turnover certificate
Documents required: Turnover certificate with UDIN generated through ICAI Portal, Chartered Accountant confirmation letter with UDIN generated through ICAI Portal, Work Done Certificate bearing Work Indent Number issued by an officer not below the rank of Executive Engineer, Documents demonstrating availability of required machinery, including purchase invoices and registration/fitness certificates where applicable, Hire/lease agreements and the lessor/owner's original invoice and registration/fitness certificates for hired or leased machinery, Credit facility or liquid asset evidence of not less than Rs. 242.895 lakh from a Nationalized bank, Earnest Money Deposit Bank Guarantee or FDR, Tender document fee payment proof and GST Demand Draft

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Evaluation: Evaluation and comparison of tenders; financial bids opened only for technically qualified tenderers
Make in India (MII): No
MSE preference: No

Line items (22)

2 — Qty: 4 5
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned including removal and disposal of top organic soil not exceeding 150 mm in thickness including all labour, usage charges of all machinery, loading, unloading, transportation etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. by Mechanical Means:- — Qty: 2.67 Ha
Excavation in Soil using Hydraulic Excavator and Tippers with Disposal Earthwork Excavation for roadwork in soil by hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location, with all lifts and including all labour, load, unload, usage charges of all machinery etc., complete. with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. — Qty: 4200 Cum
Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work as per job mix. — Qty: 1050 Cum
Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approved grade cement at 400 kg/Cum, coarse and fine aggregate conforming to IS 383, coarse aggregate as per table 600-3, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades and alignment as per drawing, chairs to dowel bars, textured with texturing machine, finishing and curing uncluding cost ofall materials all labour, usage charges of all machinery, all lead, lifts, loading, unloading stacking transporting etc., compl — Qty: 800 Cum
Providing and applying tack coat with VG-10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. — Qty: 30412.5 Sqm
Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. 50-75 mm compacted thickness as per job mix. — Qty: 1594.69 Cum
Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 5.4 per cent of mix and filler at 2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. 30-40 mm compacted thickness as per j — Qty: 912.38 Cum
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. — Qty: 518.4 Cum
Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811, including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. — Qty: 80 Metre
Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment including all lead, lifts, all labour, load, unload, usage charges of all machinery etc., complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. — Qty: 1450 Metre
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc.,complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. — Qty: 1779 Sqm
Providing and laying of hot applied thermoplastic compound 10 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 10 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. — Qty: 54 Sqm
Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.20 mm thick, 3.60mtrs hight, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. — Qty: 14.4 Each
Project Display board of size 1.80 x 1.60 and 2.8 M from ground level : Providing and erecting Project Display Board of size 1.80 vertical x 1.60 M Horizontal made of Cold Rolled coil sheet 16 guage (1.60mm thickness) sheeting sthrenghtened by welding to MS angle of size 35x35x5mm iron frame work on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frame works, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6mm 2 Nos firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.80 M from ground level as per approved drawing (including cost of lettering) including cost of all mate — Qty: 2 Each
A(ii) 90 cm equilateral triangle. — Qty: 25 Each
A(xi) 60x50 cm rectangular. — Qty: 24 Each
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by — Qty: 1966.8 Each
PVC pipes 25mm dia, 10 kg/sqcm & class 5 — Qty: 200 Rmtr
PVC pipes 90mm dia., 6 kg/sqcm & class 3 — Qty: 250 Rmtr

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Macdamization of road surface at syed Kamalud din Colony wanganpora Eid gah Near UPHC from h/o Ali Mohd upto h/o Nasir Khalel. — Civil Works & Infrastructure · Jammu and Kashmir · ₹15.0L
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L