Improvement Master Storm water drainage system in Faridabad under FMDA (Zone III)

Haryana Government · Faridabad, Haryana · Civil Works & Infrastructure · open

Key facts

Tender value: ₹67.6Cr
EMD: ₹1.4Cr
Published: 21 Oct 2026
Closing date: 12 Nov 2026
Status: open
Status as of: 04 Nov 2026 05:36 UTC
Department: FMDA
Office: Infra-II, FMDA Faridabad

Description

Works tender for improvement of the master storm water drainage system in Faridabad under FMDA, including drainage pipes, pumping machinery, valves, electrical equipment and associated installation, testing and commissioning. The BOQ covers Zone-II, III and IV, while the portal title specifies Zone III. Estimated value is INR 676,406,253 and EMD is INR 13,528,000.

Eligibility & requirements

Startup relaxation: No
MSE relaxation: No
Documents required: As-built drawings for the equipment, Completion drawings and approved design calculations, Approved and vetted structural design and drawings, Quality Assurance Plan (QAP)

New to these terms? Read how tender eligibility criteria work.

Commercial terms

Bid type: Item Rate
Make in India (MII): No
MSE preference: No

Line items (22)

Providing and laying of carrier pipe of EWR MS pipe 900 mm i/d,10 mm thick with 2 coats of 1st Class food grade epoxy paints inside and Bituminous on outer side complete as per specification. — Qty: 100 Metre
Supply installation testing and commissioning of Non Clog HORIZONTAL PUMPS of 200cum/hr@18m of 30HP for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Enginee- in-Charge complete in all respect. — Qty: 18 Nos.
P/F of NRV 300mm (C.I)IVC /kriloskar make PN 1.6 complete in all respect as per satisfaction of engineering incharge — Qty: 8 Each
Supply, Installation, Testing and Commissioning of 40HP motor starter panel Approved make as per satisfaction of Engineer- in-Charge complete in all respect.(ABB, LandT, Havells,KSb etc.) — Qty: 18 Each
Providing and fixing of 300 mm dia D.I D/F manually gear operated sluice valve (IVC make) generally conforming to IS:14846, having body, door, dome, gland in graded ductile iron to IS:1865 Gr. 400/15, four faces and spindle nut of LTB to IS 318 Gr. LTB 2, inside screw non-rising stainless steel AISI-410 spindle, valves suitable for a maximum working pressure of 10 kg/cm² (seat test) and body tested to 15 kg/cm². Flanges drilled to IS 1538 Table 4 and 6 including, carriage, loading and unloading complete in all respect as per satisfaction of the Engineer-in-Charge — Qty: 8 Each
Supplying,jointing,aligning,fixing of 300mm dia MS pipe 6mm thick complete as per direction of Engineer-in-Charge — Qty: 100 Metre
Provide and fixing 400 mm Ductile Iron double flanged manually operated PD type Sluice Valve Generally IS :14846, having body ,door ,dome ,gland in graded cast iron to IS :1865 Gr400/15, four face and spindle nut of LTB to IS 318gr LTB 2, Inside Screw non rising stainless steel AISI-410 spindle ,vcalve suitable for a maximum working pressure of 16kg/cm2 (seat test) and body test to 24kg/cm2. Flanged drilled to IS 1538 table 5and6 valve tested by closed end method only . — Qty: 13 Each
Providing and fixing jointing testing commissioning aligning of 400mm Dia MS pipe with 10mm thick food grade epoxy paints complete in all respect and satisfactory of engineer-in-charge. — Qty: 400 Per Metre
Analysis of rates providing and fixing of CI NRV IVC/VAG/Kirloskar make of PN 16 rating, including, carriage, loading and unloading and fixing, complete in all respect as per satisfaction of the Engineer-in-Charge. 350 mm i/d — Qty: 13 Each
Supplying, erection, testing and commissioning of 13000 LPM x 18 m non-clog Horizontal Centrifugal Pumping set of Impeller CF8M casing CIS210:FG260 of 970RPM, Shaft and sleeves of SS410 as well as grit clearance of 100mm along with suitable motor (415 V plus /- 10%, 50Hz plus /- 5%,LT, TEWC, IP68) complete fitted on base frame. As per specification and relevant codes. Make Kirloskar, Mather and Platt, Jyoti, KSB. — Qty: 12 Each
Supplying, erection, testing and commissioning of 13000 Lpm x 15 m Head , 90HP non-clog Submersible Motor pump set of Impeller CF8M casing CIS210:FG260 of 1000 RPM, Shaft and sleeves of SS 410 as well as grit clearance of 100mm along with suitable motor (415 V plus /- 10%, 50Hz plus /- 5%,LT, TEWC, IP68) Duck foot bend, Auto coupling with 10m lifting chain, Guide Rail, PMU with 10 Mtr. Cable with 100 HP Air cooled ( Auto transformer starter) panel with rotary Handle 3 nos. power contactors (Ac3 Duty rated) At 60 Ambient) high end Electronic relay for UV/OV, SPP ELR, PH Failure/unbalance Dry run preventer, level controller A plus ASS, V plus VSS with Selector Switch, KWH Indicators BCH make.. As per specification and relevant codes. — Qty: 8 Each
Reverse forward change over for Phase connection system of 1000A Make:- LandT and ABB — Qty: 1 Piece
SITC of main incomer VCB of 800A, 11 KV rating complete in all respects as per specifications to feed individual Transformers through the VCB - Type: Vacuum Circuit Breaker - Rating: 800A/1000A, 3P, 415V/33kV - Breaking Capacity: 25kA/40kA/50kA - Operating Mechanism: Spring/Solenoid operated - Protection: Overload, Short Circuit, Earth Fault - Features: - Vacuum interrupter- Low maintenance - High reliability - Compact design - Standards: IEC 62271-100, IS 13118 make: Schneider, ABB and CGL — Qty: 3 Nos.
Providing, laying, aligning, and jointing 1200 mm diameter (i/d) M.S. pipe having 12 mm wall thickness, fabricated as per IS:3589 (2001) from Fe-330 grade steel plates conforming to IS:2062 and manufactured by approved makes such as TATA, Jindal, or ESL. The work includes cutting, leveling, grinding, and jointing of the pipes by welding. The internal surface and outer surface of the pipe shall be coated with a minimum 200-micron thick food-grade epoxy lining complete in all respects as per specifications and as per the direction and to the entire satisfaction of the Engineer-in-Charge. — Qty: 25 Per Metre
Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of O to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in fal respect. Make:- LandT, SIEMENS, BCH, SCHNEIDER. 140HP Motor. — Qty: 20 Each
Hiring of 100 HP DG-mounted non clog dewatering pump set complete with necessary accessories and fittings, including transportation to and from site, loading, unloading, shifting and positioning as required, installation and commissioning, laying, jointing and maintenance of required delivery line, including deployment of trained operator for round-the-clock operation (24 hours) and routine maintenance of pump set and delivery line complete as directed by the Engineer-in-Charge, excluding cost of diesel/fuel. — Qty: 12 Each
Supplying, erection, testing and commissioning of 20000 Lpm x 15 m Head , 100 HP non-clog Submersible Motor pump set of Impeller CF8M casing CIS210:FG260 of 1000 RPM, Shaft and sleeves of SS 410 as well as grit clearance of 100mm along with suitable motor (415 V plus /- 10%, 50Hz plus /- 5%,LT, TEWC, IP68) Duck foot bend, Auto coupling with 10m lifting chain, Guide Rail, PMU with 10 Metre. Cable with 125 HP Air cooled ( Auto transformer starter) panel with rotary Handle 3 nos. power contactors (Ac3 Duty rated) At 60 Ambient) high end Electronic relay for UV/OV, SPP ELR, PH Failure/unbalance Dry run preventer, level controller A plus ASS, V plus VSS with Selector Switch, KWH Indicators BCH make.. As per specification and relevant codes. — Qty: 7 Each
Supplying, erection, testing and commissioning of 20000 Lpm x 18 m Head , 100 HP non-clog Horizontal Centrifugal Motor pump set of Impeller CF8M casing CIS210:FG260 of 1000 RPM, Shaft and sleeves of SS 410 as well as grit clearance of 100mm along with suitable motor (415 V plus /- 10%, 50Hz plus /- 5%,LT, TEWC, IP68) Duck foot bend, Auto coupling with 10m lifting chain, Guide Rail, PMU with 10 METRE. Cable with 125 HP Air cooled ( Auto transformer starter) panel with rotary Handle 3 nos. power contactors (Ac3 Duty rated) At 60 Ambient) high end Electronic relay for UV/OV, SPP ELR, PH Failure/unbalance Dry run preventer, level controller A plus ASS, V plus VSS with Selector Switch, KWH Indicators BCH make.. As per specification and relevant codes. — Qty: 6 Each
35 sqmm copper cable 4 core of make:- Polycab, Havells and KEI etc. — Qty: 780 Metre
1000A ACB with enclosure and all related accessories. — Qty: 10 Nos.

2 tender document(s) available — sign up to download.

Related tenders

UNDER FRAME (LS & LWS PP) — Civil Works & Infrastructure · Tamil Nadu
Operation of supply valves for the distribution pipe line for piped scheme Babaichya and Narwar with associated works, under jurisdiction of sub division rural, District Rural Division Ajmer (Excluding GST) — Civil Works & Infrastructure · Rajasthan · ₹3.3L
Construction of Mali Hut at Bimalnag Nursery under CAMPA CAT RATTLE for the year 2026 27 — Civil Works & Infrastructure · Jammu and Kashmir · ₹16.7L
CONSTRUCTION OF TOILET BLOCK IN SANOUR CITY — Civil Works & Infrastructure · Punjab · ₹9.1L
Construction of Segregation Shed and Community Compost Pit at K.N.Savulur H/O K.Naduhalli — Civil Works & Infrastructure · Tamil Nadu · ₹4.0L
Repair of street and drainage in w.no.2 — Civil Works & Infrastructure · Punjab · ₹25.0L
Repair and renovation of University Library Building at GADVASU, Ludhiana. — Civil Works & Infrastructure · Punjab · ₹9.5L
P/F Interlocking Tiles St. Baba Jora EO Gurudwara Street Ward No.07 — Civil Works & Infrastructure · Punjab · ₹3.4L