Handling Dummy Plates, Slip Plates etc. of various vessels/equipments/pipelines in PA and PC Plants
The Fertilisers And Chemicals Travancore Ltd. (FACT) · Ambalamedu, Kerala · Repair, Maintenance & AMC Services · open
Key facts
- EMD: ₹5K
- Published: 07 Nov 2026
- Closing date: 23 Nov 2026
- Status: open
- Status as of: 12 Nov 2026 10:34 UTC
- Department: Planning & Projects Department
- Office: FACT Cochin Division, Ambalamedu
Description
FACT Cochin Division seeks item-rate bids for handling dummy and slip plates and related mechanical maintenance work in its PA and PC plants, including replacement of equipment components, easing valves, and fabrication and erection of guards. Completion is required within 12 months from the start date or until the specified quantities are completed, whichever is earlier.
Eligibility & requirements
- Startup relaxation: No
- MSE relaxation: No
- Documents required: GST registration number or signed declaration of exemption from GST registration, where applicable, Compliance statement, completed and signed, Filled BOQ price schedule
New to these terms? Read how tender eligibility criteria work.
Commercial terms
- Bid type: Item Rate
- Evaluation: Total lowest amount in aggregate
- Make in India (MII): No
- MSE preference: No
Line items (41)
- 2 — Qty: 4 5
- Handling Dummy Plates from Size 50 NB to 300 NB: Arranging tools for the work. Dismantling, removing of drain dummies, end dummies, inspection covers, manhole covers, drain valves, flange joints, slip plates etc. of various equipments/pipelines in PA and PC plants for cleaning/repair/inspection, fixing back the same with new gasket and servicing without leak for size varying from 50 NB to 300 NB — Qty: 400 Nos.
- Handling Dummy Plates from Size 350 NB to 1000 NB: Arranging tools for the work. Dismantling, removing of drain dummies, end dummies, inspection covers, manhole covers, drain valves, flange joints, slip plates etc. of various equipments/pipelines in PA and PC plants for cleaning/repair/inspection, fixing back the same with new gasket and servicing without leak for size varying from 350 NB to 1000 NB. — Qty: 485 Nos.
- Replacement of Clariflocculator Wheel: The required site arrangement to replace clariflocculator wheel shall be done. Tools and tackles shall be arranged. Lifting the running frame of clariflocculator in Pollution Control plant by hydraulic jack, supporting it and remove the wheel with shaft, removing sprocket/bearing etc., replace the damaged bearing, damaged wheel etc, assembling and erecting at site and take trial run of clariflocculator, site cleaning and transporting the damaged parts to workshed/area earmarked for scrap/scrapyard as instructed by Shift-in-Charge. — Qty: 10 Nos.
- Replacement of Drive Chains in Pollution Control: Repairing/Replacement of drive chain of clariflocculators, elevators etc. Arrange the required tools and tackles for the work. Collect the spare chain from store/workshed. Dismantle the damaged chain from the sporket. Assemble and erect the spare chain after inspection of sprocket. Lubricate the chain. Site cleaning and shift the damag — Qty: 12 Nos.
- Replacement of Drive Sprockets in Pollution Control: Replacement of sprockets of clariflocculators/elevators etc. Arrange the required tools and tackles for the work. Collect the spare sprocket from store/workshed. Dismantle the drive chain. Dismantle/pull out the damaged sprocket from the shaft. Assemble the spare sprocket on the shaft. Assemble the drive chain. Lubricate the sporcket and chain. Site cleaning and shift the damaged sprocket to workshed/area earmarked for scrap/scrapyard. — Qty: 10 Nos.
- Easing of Stuck Up Valves: Easing of stuck up valves at site as instructed by Engineer-in-Charge. — Qty: 75 Nos.
- Fabrication and Erection of Chain Guard and Coupling Guard: Collect the materials and consumables for the work. Arrange necessary tools and tackles. Take measurement from the site. Fabricate chain guard and coupling guards to suit the site condition. Proper welding and grinding shall be done. Erect the chain guard/coupling guard at site. Necessary modification/providing structural support at site during erection shall be done. Clean the site and transport the scarp material to scrapyard. — Qty: 5 Nos.
- Replacement of Gearbox/Motors in Pollution Control : The required site arrangements shall be done for the replacement of gearbox/motor at pollution control area. Arrangement of necessary tools and tackles for the work shall be done. Coupling guard/chain guards shall be removed. The gearbox/motor shall be decoupled. Foundation bolts of the existing gearbox/motor shall be loosened/removed and lead/ transport the damaged gearbox/motor to mechanical/electrical work shop. Collect the new/spare gearbox/motor from mechanical/electrical workshop and shall be transported to site. The gearbox/motor shall be kept in position and insert the foundation bolts, after cleaning the base plate.Check and correct the alignment of the gearbox/motor at the drive side and driven side (for gearbox). Jackbolts, foundation bolts, base plates etc. shall be adjusted/modified according to site condition. Jack bolts/foundation bolts if damaged shall be replaced. Full tighten the foundation bolts. Couple the gearbox — Qty: 10 Nos.
- Supply/unloading and Handing over of 650/1100V, Copper conductor PVC insulated, armoured PVC outer sheathed cable of size 5 cores x 2.5 sq.mm. The cable shall be supplied at Q10 installation of FACT at Willingdon Island and must be unloaded as per the instruction of engineer-in-charge. Vechicles/loading and unloading shall be in contractors scope — Qty: 140 M
- Supply of single compression nickel plated brass cable glands suitable for 650/1100V cable of size 3.5 cores x 400 sq.mm., aluminium conductor, PVC/XLPE insulated, armoured, PVC outer sheathed. The bidder shall varify the entry thread, type of enclosure etc, to find out the actual type of gland required. — Qty: 2 Nos.
- Supply of single compression nickel plated brass cable glands suitable for 650/1100V cable of size 3.5 cores x 185 sq.mm., aluminium conductor, PVC/XLPE insulated, armoured, PVC outer sheathed. The bidder shall varify the entry thread, type of enclosure etc, to find out the actual type of gland required. — Qty: 1 Nos.
- Supply of single compression nickel plated brass cable glands suitable for 650/1100V cable of size 3.5 cores x 50 sq.mm., aluminium conductor, PVC/XLPE insulated, armoured, PVC outer sheathed. The bidder shall varify the entry thread, type of enclosure etc, to find out the actual type of gland required. — Qty: 4 Nos.
- Supply of single compression nickel plated brass cable glands suitable for 650/1100V cable of size 3 cores x 50 sq.mm., aluminium conductor, PVC/XLPE insulated, armoured, PVC outer sheathed. The bidder shall varify the entry thread, type of enclosure etc, to find out the actual type of gland required. — Qty: 4 Nos.
- Supply of single compression nickel plated brass cable glands suitable for 650/1100V cable of size 3 cores x 35 sq.mm., aluminium conductor, PVC/XLPE insulated, armoured, PVC outer sheathed. The bidder shall varify the entry thread, type of enclosure etc, to find out the actual type of gland required. — Qty: 4 Nos.
- Supply of single compression nickel plated brass cable glands suitable for 650/1100V cable of size 5 cores x 2.5 sq.mm., copper conductor, PVC/XLPE insulated, armoured, PVC outer sheathed. The bidder shall varify the entry thread, type of enclosure etc, to find out the actual type of gland required. — Qty: 8 Nos.
- Supply of heat srinkable cable jointing kit for armoured cable of size 3.5 cores x 300 sq.mm. — Qty: 2 Nos.
- Supply of heat srinkable cable jointing kit for armoured cable of size 3 cores x 185 sq.mm. — Qty: 2 Nos.
- Supply of heat srinkable cable jointing kit for armoured cable of size 3.5 cores x 120 sq.mm. — Qty: 1 Nos.
- Supply of cable tags, aluminium or SS for cables (cable No. pre-fix will be given at the time of erection) — Qty: 20 Nos.
4 tender document(s) available — sign up to download.
Related tenders
- KANDRI/ENGG/PUR/2026-27/ 1909 — Repair, Maintenance & AMC Services · Maharashtra · ₹1.4L
- AMC of Cooling Equipments of NPM — Repair, Maintenance & AMC Services · Odisha · ₹6.5L
- Repair and Maintenance Jobs in Unloading and Screening Area of RMHP — Repair, Maintenance & AMC Services · Odisha · ₹53.2L
- Service Engineering Visit for Maintenance of Van Mounted Cable Fault Locator — Repair, Maintenance & AMC Services · Odisha · ₹2.7L
- Emergency Visit for ABB Drives and Automation System — Repair, Maintenance & AMC Services · Odisha · ₹58.4L
- Cylinder Maintenance and Handling Service — Repair, Maintenance & AMC Services · Gujarat · ₹3.1Cr
- THREE YEAR ARC FOR SUPERVISION OF OVERHAULING/SERVICING OF M/S INSTRUMENTATION LIMITED (IL) VALVES AT BPCL KOCHI REFINERY — Repair, Maintenance & AMC Services · Kerala
- THREE YEAR ARC FOR SUPERVISION OF OVERHAULING/SERVICING OF M/S SAMSON VALVES & POSITIONERS, BPCL KOCHI REFINERY — Repair, Maintenance & AMC Services · Kerala